Search results

Fused Filament Fabrication (FFF) is an extrusion-based manufacturing process using fused thermoplastics. Despite its low cost, the FFF is not extensively used in high-value industrial sectors mainly due to parts' anisotropy (related to the deposition strategy) and residual stresses (caused by successive heating cycles). Thus, this study aims to investigate the process improvement and the optimization of the printed parts.

In this work, a meshless technique – the Radial Point Interpolation Method (RPIM) – is used to numerically simulate the viscoplastic extrusion process – the initial phase of the FFF. Unlike the FEM, in meshless methods, there is no pre-established relationship between the nodes so the nodal mesh will not face mesh distortions and the discretization can easily be modified by adding or removing nodes from the initial nodal mesh. The accuracy of the obtained results highlights the importance of using meshless techniques in this field.

Meshless methods show particular relevance in this topic since the nodes can be distributed to match the layer-by-layer growing condition of the printing process.

Using the flow formulation combined with the heat transfer formulation presented here for the first time within an in-house RPIM code, an algorithm is proposed, implemented and validated for benchmark examples.

Understanding the fluid flow through rock masses, which commonly consist of rock matrix and fractures, is a fundamental issue in many application areas of rock engineering. As the equivalent porous medium approach is the dominant approach for engineering applications, it is of great significance to estimate the equivalent permeability tensor of rock masses. This study aims to develop a novel numerical approach to estimate the equivalent permeability tensor for fractured porous rock masses.

The radial point interpolation method (RPIM) and finite element method (FEM) are coupled to simulate the seepage flow in fractured porous rock masses. The rock matrix is modeled by the RPIM, and the fractures are modeled explicitly by the FEM. A procedure for numerical experiments is then designed to determinate the equivalent permeability tensor directly on the basis of Darcy’s law.

The coupled RPIM-FEM method is a reliable numerical method to analyze the seepage flow in fractured porous rock masses, which can consider simultaneously the influences of fractures and rock matrix. As the meshes of rock matrix and fracture network are generated separately without considering the topology relationship between them, the mesh generation process can be greatly facilitated. Using the proposed procedure for numerical experiments, which is designed directly on the basis of Darcy’s law, the representative elementary volume and equivalent permeability tensor of fractured porous rock masses can be identified conveniently.

A novel numerical approach to estimate the equivalent permeability tensor for fractured porous rock masses is proposed. In the approach, the RPIM and FEM are coupled to simulate the seepage flow in fractured porous rock masses, and then a numerical experiment procedure directly based on Darcy’s law is introduced to estimate the equivalent permeability tensor.

The purpose of the present work is to develop the combination of the radial point interpolation method (RPIM) with a bi-directional evolutionary structural optimization (BESO) algorithm and extend it to the analysis of benchmark examples and automotive industry applications.

A BESO algorithm capable of detecting variations in the stress level of the structure, and thus respond to those changes by reinforcing the solid material, is developed. A meshless method, the RPIM, is used to iteratively obtain the stress field. The obtained optimal topologies are then recreated and numerically analyzed to validate its proficiency.

The proposed algorithm is capable to achieve accurate benchmark material distributions. Implementation of the BESO algorithm combined with the RPIM allows developing innovative lightweight automotive structures with increased performance.

Computational cost of the topology optimization analysis is constrained by the nodal density discretizing the problem domain. Topology optimization solutions are usually complex, whereby they must be fabricated by additive manufacturing techniques and experimentally validated.

In automotive industry, fuel consumption, carbon emissions and vehicle performance is influenced by structure weight. Therefore, implementation of accurate topology optimization algorithms to design lightweight (cost-efficient) components will be an asset in industry.

Meshless methods applications in topology optimization are not as widespread as the finite element method (FEM). Therefore, this work enhances the state-of-the-art of meshless methods and demonstrates the suitability of the RPIM to solve topology optimization problems. Innovative lightweight automotive structures are developed using the proposed methodology.

Develop a local radial point interpolation method (LRPIM) to analyze the dissipation process of excess pore water pressure in porous media and verify its numerical capability.

Terzaghi's consolidation theory is used to describe the dissipation process. A local residual form is formulated over only a sub‐domain. This form is spatially discretized by radial point interpolation method (RPIM) with basis of multiquadrics (MQ) and thin‐plate spline (TPS), and temporally discretized by finite difference method. One‐dimensional (1D) and two‐dimensional consolidation problems are numerically analyzed.

The LRPIM is suitable, efficient and accurate to simulate this dissipation process. The shape parameters, q=1.03, R=0.1 for MQ and η=4.001 for TPS, are still valid.

The asymmetric system matrix in LRPIM spends more resources in storage and CPU time.

Local residual form requires no background mesh, thus being a truly meshless method. This provides a fast and practical algorithm for engineering computation.

This paper provides a simple, accurate and fast numerical algorithm for the dissipation process of excess pore water pressure, largely simplifies data preparation, shows that the shape parameters from solid mechanics are also suitable for the dissipation process.

The purpose of this paper is to extend the natural neighbour radial point interpolation method (NNRPIM) to the dynamic analysis (free vibrations and forced vibrations) of two‐dimensional, three‐dimensional and bending plate problems.

The NNRPIM shape‐function construction is briefly presented, as are the dynamic equations and the mode superposition method is used in the forced vibration analysis. Several benchmark examples of two‐dimensional and plate bending problems are solved and compared with the three‐dimensional NNRPIM formulation. The obtained results are compared with the available exact solutions and the finite element method (FEM) solutions.

The developed NNRPIM approach is a good alternative to the FEM for the solution of dynamic problems, once the obtained results with the EFGM shows a high similarity with the obtained FEM results and for the majority of the studied examples the NNRPIM results are more close to the exact solution results.

Comparing the FEM and the NNRPIM, the computational cost of the NNRPIM is higher.

The paper demonstrates extension of the NNRPIM to the dynamic analysis of two‐dimensional, three‐dimensional and bending plate problems. The elimination of the shear‐locking phenomenon in the NNRPIM plate bending formulation. The various solved examples prove a high convergence rate and accuracy of the NNRPIM.

The purpose of this paper is to extend the scaled boundary radial point interpolation method (SBRPIM), as a novel semi-analytical scheme, to the analysis of the steady state confined seepage flows.

This method combines the advantages of the scaled boundary finite element method and the BRPIM. In this method, only boundary nodes are used, no fundamental solution of the problem is required, and as the shape functions constructed based on the RPIM satisfy the Kronecker delta function property, the boundary conditions of problems can be imposed accurately and easily.

Three numerical examples, including seepage flow through homogeneous and non-homogeneous soils, are analyzed in this paper. Comparing the flow net obtained by SBRPIM and other numerical methods confirms the ability of the proposed method in analyzing seepage flows. In addition, in these examples, the accuracy of the SBRPIM in modeling the velocity singularity at a sharp corner is illustrated. SBRPIM accurately models the singularity point in non-homogeneous and anisotropic soil.

SBRPIM method is a simple effective tool for analyzing various kinds of engineering problems. It is easy to implement for modeling the velocity singularity at a sharp corner. The proposed method accurately models the singularity point in non-homogeneous and anisotropic soil.

To increase the use of the meshless method, a hybrid stress method is introduced into the meshless method.

The method is based on the radial point interpolation method (RPIM). According to the Hellinger Reissner principle, stress functions are introduced into the solution procedure. Finite elements are used as background cells for integration. All cells are divided into two types – the H cells, which are around the traction-free circular boundary, and the G cells. For the H cells, stress functions in polar coordinates are created. For the G cells, 12-parameter stress functions in Cartesian coordinates are used. Stress functions are based on equilibrium equations and stress compatible equation.

Numerical results show that this method is reliable.

Hybrid stress methods have been applied to finite element methods, but the finite element methods have not been applied into meshless methods.

In this paper, a modified meshless method, as one of the numerical techniques that has recently emerged in the area of computational electromagnetics, is extended to solving time-domain wave equation. The paper aims to discuss these issues.

In space domain, the fields at the collocation points are expanded into a series of new Shepard's functions which have been suggested recently and are treated with a meshless method procedure. For time discretization of the second-order time-derivative, two finite-difference schemes, i.e. backward difference and Newmark-β techniques, are proposed.

Both schemes are implicit and always stable and have unconditional stability with different orders of accuracy and numerical dispersion. The unconditional stability of the proposed methods is analytically proven and numerically verified. Moreover, two numerical examples for electromagnetic field computation are also presented to investigate characteristics of the proposed methods.

The paper presents two unconditionally stable schemes for meshless methods in time-domain electromagnetic problems.

Due to the strong reliance on element quality, there exist some inherent shortcomings of the traditional finite element method (FEM). The model of FEM behaves overly stiff, and the solutions of automated generated linear elements are generally of poor accuracy about especially gradient results. The proposed cell-based smoothed point interpolation method (CS-PIM) aims to improve the results accuracy of the thermoelastic problems via properly softening the overly-stiff stiffness.

This novel approach is based on the newly developed G space and weakened weak (w²) formulation, and of which shape functions are created using the point interpolation method and the cell-based gradient smoothing operation is conducted based on the linear triangular background cells.

Owing to the property of softened stiffness, the present method can generally achieve better accuracy and higher convergence results (especially for the temperature gradient and thermal stress solutions) than the FEM does by using the simplest linear triangular background cells, which has been examined by extensive numerical studies.

The CS-PIM is capable of producing more accurate results of temperature gradients as well as thermal stresses with the automated generated and unstructured background cells, which make it a better candidate for solving practical thermoelastic problems.

It is the first time that the novel CS-PIM was further developed for solving thermoelastic problems, which shows its tremendous potential for practical implications.

In this paper, the smoothed point interpolation method (SPIM) is used to model the slope deformation. However, the computational efficiency of SPIM is not satisfying when modeling the large-scale nonlinear deformation problems of geological bodies.

In this paper, the SPIM is used to model the slope deformation. However, the computational efficiency of SPIM is not satisfying when modeling the large-scale nonlinear deformation problems of geological bodies.

A simple slope model with different mesh sizes is used to verify the performance of the efficient face-based SPIM. The first accelerating strategy greatly enhances the computational efficiency of solving the large-scale slope deformation. The second accelerating strategy effectively improves the convergence of nonlinear behavior that occurred in the slope deformation.

The designed efficient face-based SPIM can enhance the computational efficiency when analyzing large-scale nonlinear slope deformation problems, which can help to predict and prevent potential geological hazards.