Search results

Literature on packaged food consumption and associated factors in Kerala is limited. This study aims to find out consumption pattern of packaged food and the factors associated with it among young adults in Kerala.

The authors conducted a cross-sectional survey among 384 young adults aged 18–30 years selected using multistage cluster sampling. Information on packaged food consumption and sociodemographic factors was collected using a structured, pre-tested interview schedule. Binary logistic regression analysis was done to find out the factors associated with packaged food consumption.

Among the participants, 85.7% (95% CI = 81.9%–88.9%) reported consuming packaged food at least once a week, and 45% (95% CI = 40.4%–50.3%) reported consuming packaged food more than two times a week. Individuals who were employed [adjusted odds ratio (AOR) = 1.71, 95% CI = 1.06–2.76], who consume packaged food without a fixed routine (AOR = 2.24, 95% CI = 1.18–4.28), those without previous attempts to reduce packaged food consumption (AOR = 3.45, 95% CI = 1.72–6.91) and those who preferred packaged food for their taste and flavor (AOR = 1.73, 95% CI = 1.09–2.74) had greater odds of consuming packaged food more than two times a week compared to their counterparts.

Packaged food is frequently consumed by more than 40% of young adults in Kerala. Efforts focused on individuals (such as building awareness and taxing packaged foods) are warranted to control packaged food consumption among young adults.

This study aims to investigate the consumption pattern of aerated drinks and examine its determinants among adolescents’ boys and girls (15–19 years) in India.

The fifth round of National Family Health Survey (2019-2021) data was examined applying sample weights. Pattern of consumption and its determinants was analysed separately for boys and girls using binary logistic regression and calculating adjusted odds ratio (AOR) at 95% confidence interval.

The daily, weekly and occasionally consumption of aerated drinks was 4.4%, 22.7%, 63% for boys and 2.9%, 14%, 70.8% for girls, respectively. Factors such as secondary/higher education [Boys AOR = 1.5, (1.2–1.9) (p = 0.001); Girls AOR = 1.2, (1.1–1.2) (p < 0.001)]; rich wealth index [Boys AOR = 1.8, (1.6–2.1) (p < 0.001); Girls AOR = 1.3, (1.3–1.4) (p < 0.001)]; fried food consumption [Boys AOR = 11.1, (9.5–12.9) (p < 0.001); Girls AOR = 11.5, (10.8–12.3) (p < 0.001)]; and watching television [Boys AOR = 1.5, (2.3–1.7) (p < 0.001); Girls AOR = 1.3, (1.3–1.4) (p < 0.001)] were found significant predictors of aerated drink consumption among adolescents.

The authors noted differences in consumption pattern between adolescents’ boys and girls. A shift to occasional consumption from weekly and daily was also observed. A further decrease in consumption may requires gender and region-specific health-promotion interventions. Rationalising sugar-sweetened beverages taxation adhering World Health Organisation’s recommendation to reduce affordability may be further researched in the Indian context. Furthermore, sale and consumption of traditional and locally available fruits, vegetables and healthy beverages may be warranted.

This study estimated the prevalence of depressive disorders among PhD students and analyzed the underlying factors in the Indian context.

The authors utilized an “Integrative framework” and a mixed-method approach involving survey and in-depth interviews. The survey was conducted among 240 PhD students using multistage cluster sampling in two public universities of Kerala, India. Data were collected using a self-administered Patient Health Questionnaire-9. In-depth interviews were conducted among 12 students using semi-structured interview guide. Multinomial regression and thematic analyses were undertaken to examine the factors associated with depressive disorders.

About 31.7, 41.7, 17.9, 6.7 and 2.1% had no/minimal, mild, moderate, moderately severe and severe depressive disorders, respectively. Students belonging to economically weaker section (OR = 3.06; 95% CI = 1.32–7.12), having limited knowledge of local language (OR = 4.24; 95% CI = 1.00–17.95) and earning less than INR 20,000/month (OR = 2.36; 95% CI = 1.12–5.00) were more likely to report moderate to severe depressive disorders. In addition, thematic analyses of interviews found that financial hardship, disagreement between student-supervisor, compromised students' support services and an uncertain job market were the key factors affecting the mental health of students and inhibiting academic performance.

This study adds to the existing literature by examining the prevalence and underlying factors of depressive disorders among doctoral students in the Indian context. The results of this study can act as a guide for universities and educational regulatory bodies to address the burgeoning issue of depressive disorders among research students in India.

To assess the state of supply chain management (SCM) research in India and to understand the research trends and methodologies used. The present study also aims to create a taxonomy of the subject areas researched in India.

The present study employed the systematic literature review methodology. Literature from 395 peer journal papers in 67 leading journals over a 20-year period (2000–2020 Quarter-1) was comprehensively reviewed and assessed.

SCM research in India started around the year 2000. The quantum of research was low (single digit) until 2010. There has been steady growth over the last decade, and over 50% of the total papers up until now has been published in the last four years. The present study created a three-tiered taxonomy of the subject areas and classified the papers as per it. The first tier (level-1) has seven categories (SCM strategy, network design, SCM processes and integration, IT systems, skills, performance measurement and others). A perusal of the newly created taxonomy revealed that, except for a few areas under level-1 categories (such as SCM processes and SCM strategy), the other level-1 categories have not seen much research. Similarly, there is little or no research in a large number of level-2 categories (such as outsourcing strategy, channel strategy, demand management, demand fulfillment, customer relationship management, integrated supply chain planning, new product development, returns, supply chain orientation, performance monitoring, performance improvement, SCM adoption process, SCM implementation issues and quantified benefits of SCM). Methodologically, the rigor of SCM research in India needs improvement.

A comprehensive taxonomy of SCM subject areas researched in India at three cascading levels was created for the first time in the present study. The taxonomy will help provide researchers with a clear understanding of the structure of the subject areas and help in identifying areas where research has been carried out and the subject areas where gaps exist for future research to proceed. The present study also provides an overview of the methodological rigor of SCM research in India and points out some of the limitations that researchers should avoid in future studies.

The purpose of this paper is to generate awareness of contributions made by benchmarking toward building performance of Indian service industries in globally market. Ranking of Benchmarking is done on the basis of their application which give confidence for the managers to adopt in their Industries so that they may become best in their field.

Methodology consists of three phase: define, phase include definitions, factors of benchmarking as literature outcomes, questionnaire survey and outcome of survey. In the second phase, analysis of collected data and applications of multi-criteria decision-making approaches [technique for order preference by similarity to ideal solution (TOPSIS) and analytical network process (ANP)] are used. The last phase includes comparison of results which gives validation in similarities of ranking obtained.

The study identifies seven different benchmarking techniques used for service industries. Using TOPSIS and ANP approaches shows similarity that external benchmarking, performance benchmarking and internal benchmarking are the first three ranks that give basis for several critical success factors s, namely, planning, reliability, standardization, time behavior, usability, etc., as part of benchmarking using in service industries.

The limitation is the assumptions made by multi-criteria decision-making approaches which may effect the analysis of the study as these are taken theoretically.

This study is a first attempt to find similarities in both techniques while comparing benchmarking in Indian service industries.

Risk management has emerged as a critical issue in operating a supply chain effectively in the presence of uncertainties that result from unexpected variations. Assessing and managing supply chain risks are receiving significant attention from practitioners and academics. At present, the ceramic industry in Bangladesh is growing. Thus, managers in the industry need to properly assess supply chain risks for mitigation purposes. This study aims to identify and analyze various supply chain risks occurring in a ceramic factory in Bangladesh.

A model is proposed based on a fuzzy technique for order preference using similarity to an ideal solution (fuzzy-TOPSIS) for evaluating supply chain risks. For this, 20 supply chain risk factors were identified through an extensive literature review and while consulting with experts from the ceramic factories. Fuzzy-TOPSIS contributed to the analysis and assessment of those risks.

The results of this research indicate that among the identified 20 supply chain risks, lack of operational quality, lack of material quality and damage to inventory were the major risks for the ceramic sector in Bangladesh.

The impact of supply chain risks was not shown in this study and the risks were considered independent. Therefore, research can be continued to address these two factors.

The outcome of this research is expected to assist industrial managers and practitioners in the ceramic sector in taking proactive action to minimize supply chain risks. A sensitivity analysis was performed to determine the relative stability of the risks.

This study uses survey data to analyze and evaluate the major supply chain risks related to the ceramic sector. An original methodology is provided for identifying and evaluating the major supply chain risks in the ceramic sector of Bangladesh.

The purpose of this paper is to adopt the multi-objective optimization technique for identifying a set of optimum abrasive water jet machining (AWJM) parameters to achieve maximum material removal rate (MRR) and minimum surface roughness.

Data of a few experiments as per the Taguchi’s orthogonal array are considered for achieving maximum MRR and minimum surface roughness (Ra) of the Inconel718. Analysis of variance is performed to understand the statistical significance of AWJM input process parameters.

Empirical relations are developed for MRR and Ra in terms of the AWJM process parameters and demonstrated their adequacy through comparison of test results.

The signal-to-noise ratio transformation should be applied to take in to account the scatter in the repetition of tests in each test run. But, many researchers have adopted this transformation on a single output response of each test run, which has no added advantage other than additional computational task. This paper explains the impact of insignificant process parameter in selection of optimal process parameters. This paper demands drawbacks and complexity in existing theories prior to use new algorithms.

Taguchi approach is quite simple and easy to handle optimization problems, which has no practical implications (if it handles properly). There is no necessity to hunt for new algorithms for obtaining solution for multi-objective optimization AWJM process.

This paper deals with a case study, which demonstrates the simplicity of the Taguchi approach in solving multi-objective optimization problems with a few number of experiments.

In the Indian manufacturing SMEs context, supply chains have a complex structure having multiple echelons, multiple partners and multiple locations. Due to these complexities, most of the Indian manufacturing SMEs face several types of supply chain risks. This paper aims to identify the dominant risk variables and to develop the interrelationship among these risk variables.

Based on the literature review and experts’ opinion, nine dominant risk variables faced by an Indian manufacturing SMEs have been identified. An interpretive structural modelling (ISM) approach has been adopted to establish the interrelationship among the risk variables. These risk variables have been classified by using MICMAC analysis. Based on ISM-MICMAC approach, a case study on three Indian manufacturing SMEs has been carried out.

This study would help the supply chain managers to understand and prioritize the significant risk variables. Nine significant risks variables of Indian manufacturing small and medium enterprises (SMEs) have been studied. External risk, information technology risk and financial risk have identified as most influencing risk variables, while delay risk and market risk have emerged as the most dependent risk variables. These results will provide a guideline to supply chain managers for implementation of supply chain risk management (SCRM).

In this study, an ISM-based model is developed based on the opinion of experts from a group of Indian manufacturing SMEs; as such, this model may be biased and limited to a selected company. This framework can be extended further by adding more risk variables and sub-risk variables from the other sectors/organizations.

Many SCRM models are available in past literature, but no model has been proposed for the Indian Manufacturing SMEs. This research finding can be useful for managers to understand the characteristics and interrelationships among the risk variables for building a robust supply chain. These results will also help the supply chain managers in making proactive plans for SCRM, especially in the Indian SMEs context.

Organizations have released the importance of lean manufacturing practices (LMPs) and total quality management (TQM) in enhancing competitiveness. However, the implementation of LMPs and TQM becomes more complex when discerning the environmental sustainability position. The complexity stems from the fact that LMPs and TQM are more intricate because of cultural differences. Thus, this study aims to tackle the aforementioned phenomenon by investigating the impact of LMPs and TQM on environmental sustainability moderated by quality culture.

A survey was distributed among small and medium enterprises (SMEs) in Jordan; thus, 315 valid responses were received. Partial least square structural equation modelling was used to analyze the data and test hypotheses.

The findings showed that environmental sustainability was significantly impacted by all the LMP practices except Kanban and all the TQM practices except statistical process control. Moreover, quality culture significantly and negatively moderated the relationship between TQM and environmental sustainability. However, the influence of LMPs on environmental sustainability was not significantly moderated by quality culture.

This study has implications for policymakers in SMEs, supply chain managers and academics regarding the importance of LMPs and TQM systems for implementing environmental sustainability and the role of quality culture.

This study provides guidelines for decision-makers on the pathways that enable them to sustain the environment to safeguard the natural ecosystem and natural resources for upcoming generations.

The originality of this study stems from the alignment of LMPs and TQM in enhancing environmental sustainability, taking into consideration the role of quality culture in SMEs, where previous studies failed short to investigate this phenomenon.

India liberalized its economy in 1991, which resulted in intense global competition, quality-conscious and demanding customers. Additionally, significant technological advancements lead to enhancements in products and processes. These forced Indian organizations to adopt innovative business strategies in the past 30 years. Meanwhile, the Lean Six Sigma methodology has significantly grown with vast applicability during the past 30 years. Thus, the purpose of this study is to develop the learning on Lean Six Sigma methodology in the Indian context through investigation of literature.

A three-stage systematic literature review approach was adopted to investigate the literature during the present study. In total, 187 articles published in 62 journals/conference proceedings from 2005 to 2022 (18 years) were shortlisted. The first part of the article summarizes the significant milestones towards the quality journey in the Indian context, along with the evolution of the Lean Six Sigma methodology. The second part examines the shortlisted papers on Lean Six Sigma frameworks, their applicability in industrial sectors, performance metrics, outcomes realized, publication trends, authorship patterns and leading researchers from the Indian perspective.

Lean Six Sigma has emerged as a highly acclaimed and structured business improvement strategy worldwide. The Indian economy has seen remarkable growth in the past decade and is one of the fastest-growing economies in the 21st century. Lean Six Sigma implementation in India has significantly increased from 2014 onward. The study revealed that researchers have proposed several different frameworks for Lean Six Sigma implementation, the majority of which are conceptual. Furthermore, the balanced applicability of Lean Six Sigma in manufacturing and service sectors was observed with the highest implementation in the health-care sector. Additionally, the widely adopted tools, techniques along with performance metrics exploring case studies were reported along with a summary of eminent and leading researchers in the Indian context.

This study is confined to reviewed papers as per the research criteria with a significant focus on the Indian context and might have missed some papers due to the adopted papers selection strategy.

The present study is one of the initial attempts to investigate the literature published on Lean Six Sigma in the Indian context, including perspective on the Indian quality movement. Therefore, the present study will provide an understanding of Lean Six Sigma methodology in the Indian context to graduating students in engineering and management and entry-level executives. The analysis and findings on Lean Six Sigma frameworks, research approach, publications details, etc., will be helpful to potential research scholars and academia. Additionally, analysis of case studies on Lean Six Sigma implementation by Indian industries will assist the managers and professionals in decision making.