Search results

This study aims to clarify the evolution law of stress field and fracture field during the mining process of inclined coal seam, to prevent the occurrence of roof burst water and impact ground pressure accident during the advancing process of working face.

The evolution law of stress-fracture field under different mining conditions of inclined coal seam was studied by using discrete element method and similar material simulation method.

The overburden stress at the lower end of the coal seam was mainly transmitted to the deep rock mass on the left side, and the overburden stress at the upper end was mainly transmitted to the floor direction. With the increase of the inclined length of the mining coal seam, the development of the fracture zone gradually evolves from the “irregular arch” form to the “transversely developed trapezoid” form. The development range of the fracture zone was always in the internal area of the stress concentration shell.

An original element of this paper is based on the condition that the dip angle of coal seam is 35°, and the evolution law of overburden stress-fracture field during the excavation of coal seam with different lengths was analyzed by UDEC numerical simulation software. The coupling relationship between stress shell and fracture field was proposed, and the development range of fracture zone was determined by stress. The value of this paper is to provide technical support and practical basis for the safety production of a mine working face.

This study aims to design and validate a theoretical model for capacitive imaging (CI) sensors that incorporates the interelectrode shielding and surrounding shielding electrodes. Through experimental verification, the effectiveness of the theoretical model in evaluating CI sensors equipped with shielding electrodes has been demonstrated.

The study begins by incorporating the interelectrode shielding and surrounding shielding electrodes of CI sensors into the theoretical model. A method for deriving the semianalytical model is proposed, using the renormalization group method and physical model. Based on random geometric parameters of CI sensors, capacitance values are calculated using both simulation models and theoretical models. Three different types of CI sensors with varying geometric parameters are designed and manufactured for experimental testing.

The study’s results indicate that the errors of the semianalytical model for the CI sensor are predominantly below 5%, with all errors falling below 10%. This suggests that the semianalytical model, derived using the renormalization group method, effectively evaluates CI sensors equipped with shielding electrodes. The experimental results demonstrate the efficacy of the theoretical model in accurately predicting the capacitance values of the CI sensors.

The theoretical model of CI sensors is described by incorporating the interelectrode shielding and surrounding shielding electrodes into the model. This comprehensive approach allows for a more accurate evaluation of the detecting capability of CI sensors, as well as optimization of their performance.

Globally, there is a growing proportion of disabled people as a result of different circumstances. This growth generates attention and leads to ways to integrate the affected population into society. Addressing such disability and integration is particularly important at buildings level, enabling and expanding the scope of activities for people with disabilities (PWDs). The rising number of PWDs and the need to integrate them into society create a need for action to improve their living condition and integration into society. This study aims to examine the issue of accessibility for PWDs in higher education facilities in Qatar.

Addressing accessibility at buildings level is particularly important in higher education because it enables inclusion in training and education and increases the potential for productive engagement in society. The study aims to develop an objective tool to assess and measure accessibility in educational institutions. Five selected buildings were examined and evaluated at Qatar University based on proximity, multi-use, vertical and horizontal circulation availability. The survey respondents were randomly selected. An existing assessment method was used in surveying respondents, including those with and without disabilities.

A comparative study was conducted to explore the discrepancy between facility users with and without disability, indicating the gap in existing tools.

The developed tool generates the same outcome when conducted by different assessors, indicating the level of compliance and percentage met as a benefit, not a focus. It allows professionals and non-professionals with minimal experience to conduct the assessment.

This study aims to investigate the noise-inducing characteristics during the start-up process of a mixed-flow pump and the impact of different start-up schemes on pump noise.

This study conducted numerical simulations on the mixed-flow pump under different start-up schemes and investigated the flow characteristics and noise distribution under these schemes.

The results reveal that the dipole noise is mainly caused by pressure fluctuations, while the quadrupole noise is mainly generated by the generation, development and breakdown of vortices. Additionally, the noise evolution characteristics during the start-up process of the mixed-flow pump can be divided into the initial stage, stable growth stage, impulse stage and stable operation stage.

The findings of this study can provide a theoretical basis for the selection of start-up schemes for mixed-flow pumps, reducing flow noise and improving the operational stability of mixed-flow pumps.

Digital twin (DT) and building information modeling (BIM) are interconnected in some ways. However, there has been some misconception about how DT differs from BIM. As a result, industry professionals reject DT even in BIM-based construction projects due to reluctance to innovate. Furthermore, researchers have repeatedly developed tools and techniques with the same goals using DT and BIM to assist practitioners in construction projects. Therefore, this study aims to assist industry professionals and researchers in understanding the relationship between DT and BIM and synthesize existing works on DT and BIM.

A systematic review was conducted on published articles related to DT and BIM. A total record of 54 journal articles were identified and analyzed.

The analysis of the selected journal articles revealed four types of relationships between DT and BIM: BIM is a subset of DT, DT is a subset of BIM, BIM is DT, and no relationship between BIM and DT. The existing research on DT and BIM in construction projects targets improvements in five areas: planning, design, construction, operations and maintenance, and decommissioning. In addition, several areas have emerged, such as developing geo-referencing approaches for infrastructure projects, applying the proposed methodology to other construction geometries and creating 3D visualization using color schemes.

This study contributed to the existing body of knowledge by overviewing existing research related to DT and BIM in construction projects. Also, it reveals research gaps in the body of knowledge to point out directions for future research.

The study seeks to understand the possible opportunities that Industry 5.0 might offer for various aspects of inclusive sustainability. The study aims to discuss existing perspectives on the classification of Industry 5.0 technologies and their underlying role in materializing the sustainability values of this agenda.

The study systematically reviewed Industry 5.0 literature based on the PRISMA protocol. The study further employed a detailed content-centric review of eligible documents and conducted evidence mapping to fulfill the research objectives.

The advancement of Industry 5.0 is currently underway, with noteworthy initial contributions enriching its knowledge base. Although a unanimous definition remains lacking, diverse viewpoints emerge concerning the recognition of fundamental technologies and the potential for yielding sustainable outcomes. The expected contribution of Industry 5.0 to sustainability varies significantly depending on the context and the nature of underlying technologies.

Industry 5.0 holds the potential for advancing sustainability at both the firm and supply chain levels. It is envisioned to contribute proportionately to the three sustainability dimensions. However, the current discourse primarily dwells in theoretical and conceptual domains, lacking empirical exploration of its practical implications.

This study comprehensively explores diverse perspectives on Industry 5.0 technologies and their potential contributions to economic, environmental and social sustainability. Despite its promise, the practical evidence supporting the effectiveness of Industry 5.0 remains limited. Certain conditions are necessary to realize the benefits of Industry 5.0 fully, yet the mechanisms behind these conditions require further investigation. In this regard, the study suggests several potential areas for future research.

The development of new advanced materials, such as photopolymerizable resins for use in stereolithography (SLA) and Ti6Al4V manufacture via selective laser melting (SLM) processes, have gained significant attention in recent years. Their accuracy, multi-material capability and application in novel fields, such as implantology, biomedical, aviation and energy industries, underscore the growing importance of these materials. The purpose of this study is oriented toward the application of new advanced materials in stent manufacturing realized by 3D printing technologies.

The methodology for designing personalized medical devices, implies computed tomography (CT) or magnetic resonance (MR) techniques. By realizing segmentation, reverse engineering and deriving a 3D model of a blood vessel, a subsequent stent design is achieved. The tessellation process and 3D printing methods can then be used to produce these parts. In this context, the SLA technology, in close correlation with the new types of developed resins, has brought significant evolution, as demonstrated through the analyses that are realized in the research presented in this study. This study undertakes a comprehensive approach, establishing experimentally the characteristics of two new types of photopolymerizable resins (both undoped and doped with micro-ceramic powders), remarking their great accuracy for 3D modeling in die-casting techniques, especially in the production process of customized stents.

A series of analyses were conducted, including scanning electron microscopy, energy-dispersive X-ray spectroscopy, mapping and roughness tests. Additionally, the structural integrity and molecular bonding of these resins were assessed by Fourier-transform infrared spectroscopy–attenuated total reflectance analysis. The research also explored the possibilities of using metallic alloys for producing the stents, comparing the direct manufacturing methods of stents’ struts by SLM technology using Ti6Al4V with stent models made from photopolymerizable resins using SLA. Furthermore, computer-aided engineering (CAE) simulations for two different stent struts were carried out, providing insights into the potential of using these materials and methods for realizing the production of stents.

This study covers advancements in materials and additive manufacturing methods but also approaches the use of CAE analysis, introducing in this way novel elements to the domain of customized stent manufacturing. The emerging applications of these resins, along with metallic alloys and 3D printing technologies, have brought significant contributions to the biomedical domain, as emphasized in this study. This study concludes by highlighting the current challenges and future research directions in the use of photopolymerizable resins and biocompatible metallic alloys, while also emphasizing the integration of artificial intelligence in the design process of customized stents by taking into consideration the 3D printing technologies that are used for producing these stents.

This paper aims to highlight the expanding link between facility management (FM) and building automation and control systems (BACS) through a review of literature. It examines the opportunities and challenges of BACS for facility managers and proposes solutions for mitigating the risks associated with BACS implementation.

This paper reviews various research papers to explore the positive influences of BACS on FM, such as support with strategic decision-making, predictive maintenance, energy efficiency and comfort improvement. It also discusses the challenges of BACS, including obsolescence, interoperability, vendor lock-in, reliability and security risks and suggests potential solutions based on existing literature.

BACS offers numerous opportunities for facility managers, such as improved decision-making, energy efficiency and comfort levels in office buildings. However, there are also risks associated with BACS implementation, including obsolescence, interoperability, vendor lock-in, reliability and security risks. These risks can be mitigated through measures such as hardware and software obsolescence management plans, functional requirement lists, wireless communication protocols, advanced feedback systems and increased awareness about BACS security.

To the best of the authors’ knowledge, no prior academic research has been conducted on the expanding link between FM and BACS. Although some papers have touched upon the opportunities and challenges of BACS for FM, this paper aims to provide a comprehensive overview of these findings by consolidating existing literature.

This paper aims to overcome the inability of both comparing loss costs and accounting for production resource losses of Overall Equipment Effectiveness (OEE)-related approaches.

The authors conducted a literature review about the studies focusing on approaches combining OEE with monetary units and/or resource issues. The authors developed an approach based on Overall Equipment Cost Loss (OECL), introducing a component for the production resource consumption of a machine. A real case study about a smart multicenter three-spindle machine is used to test the applicability of the approach.

The paper proposes Resource Overall Equipment Cost Loss (ROECL), i.e. a new KPI expressed in monetary units that represents the total cost of losses (including production resource ones) caused by inefficiencies and deviations of the machine or equipment from its optimal operating status occurring over a specific time period. ROECL enables to quantify the variation of the product cost occurring when a machine or equipment changes its health status and to determine the actual product cost for a given production order. In the analysed case study, the most critical production orders showed an actual production cost about 60% higher than the minimal cost possible under the most efficient operating conditions.

The proposed approach may support both production and cost accounting managers during the identification of areas requiring attention and representing opportunities for improvement in terms of availability, performance, quality, and resource losses.

This study reviews scholarly work in sustainable green logistics and remanufacturing (SGLR) and their subdisciplines, in combination with bibliometric, thematic and content analyses that provide a viewpoint on categorization and a future research agenda. This paper provides insight into current research trends in the subjects of interest by examining the most essential and most referenced articles promoting sustainability and climate-neutral logistics.

For the literature review, the authors extracted and sifted 2180 research and review papers for the period 2008–2023 from the Scopus database. The authors performed bibliometric and content analyses using multiple software programs such as Gephi, VOSviewer and R programming.

The SGLR papers can be grouped into seven clusters: (1) The circular economy facets; (2) Decarbonization of operations to nurture a climate-neutral business; (3) Green sustainable supply chain management; (4) Drivers and barriers of reverse logistics and the circular economy; (5) Business models for sustainable logistics and the circular economy; (6) Transportation problems in sustainable green logistics and (7) Digitalization of logistics and supply chain management.

In this review, fundamental ideas are established, research gaps are identified and multiple future research subjects are proposed. These propositions are categorized into three main research streams, i.e. (1) Digitalization of SGLR, (2) Enhancing scopes, sectors and industries in the context of SGLR and (3) Developing more efficient and effective climate-neutral and climate change-related solutions and promoting more environmental-related and sustainability research concerning SGLR. In addition, two conceptual models concerning SGLR and climate-neutral strategies are developed and presented for managers and practitioners to consider when adopting green and sustainability principles in supply chains. This review also highlights the need for academics to go beyond frameworks and build new techniques and instruments for monitoring SGLR performance in the real world.

This study provides an overview of the evolution of SGLR; it also clarifies concepts, environmental concerns and climate change practices, particularly those directed to supply chain management.