Search results
1 – 10 of over 4000Biao Ma, Qian Wang, Changsong Zheng, Liang Yu, Guoyu Wang and Liangjie Zheng
This paper aims to explore the effect of automatic transmission fluid (ATF) temperature on the dynamic friction-wear properties of the friction component in a wet multi-disc…
Abstract
Purpose
This paper aims to explore the effect of automatic transmission fluid (ATF) temperature on the dynamic friction-wear properties of the friction component in a wet multi-disc clutch during the running-in process.
Design/methodology/approach
The running-in evolution was explored in terms of global friction performance and instantaneous friction characteristics. The variation of friction torque of the initial 300 engagement cycles was obtained by wet-clutch tests. Finally, an optical microscope was used to detect the wear mechanism of friction surfaces.
Findings
The ATF temperature showed a significant effect on the friction-wear performance in the clutch running-in process. The mean coefficient of friction decreased with the increase of the ATF temperature and decreased rapidly in the approximately initial 60 clutch engagements. The higher the ATF temperature was, the thinner the ATF film was, and more asperity summits were cut, thus leading to a smoother surface. Considering the slightly instantaneous friction fluctuation and the wear performance, a proper ATF temperature is necessary.
Originality/value
The results provide theoretical guidance for selecting the optimal ATF temperature during the running-in process.
Details
Keywords
Biao Ma, Liang Yu, Man Chen, He Yan Li and Liang Jie Zheng
This paper aims to investigate the thermal characteristics of the clutch hydraulic system under various oil flow conditions. Increasing the oil flow is one of the most important…
Abstract
Purpose
This paper aims to investigate the thermal characteristics of the clutch hydraulic system under various oil flow conditions. Increasing the oil flow is one of the most important approaches to reduce the clutch temperature. However, the effect of the oil flow on the clutch temperature remains to be explored.
Design/methodology/approach
The thermal resistance network model and the lumped parameter method are used to study the thermal characteristics of the clutch hydraulic system. The predicted temperature variations of the clutch and the oil are compared with experimental data.
Findings
Results demonstrate that the larger the friction power is, the higher the temperatures of the clutch and the oil are. However, the temperature growth rates of the clutch and oil present different trends: the former decreases gradually and the latter increases constantly. Additionally, increasing the oil flow within a certain range gives rise to the decrease of clutch temperature and the increase of oil temperature; nevertheless, their variation trends are gradually weakening. When the oil flow is large enough, it brings a slight effect on the clutch temperature rise.
Originality/value
This paper extends the knowledge into the oil flow supply of the clutch hydraulic system. The conclusions can provide a theoretical guidance for the oil management of the transmission system. Additionally, the thermal resistance network model is also effective and efficient for other hydraulic equipment to predict the temperature variation.
Details
Keywords
Qian Wang, Biao Ma, Liang Yu, Man Chen, Guoyu Wang and Liangjie Zheng
This paper aims to explore the influence of applied pressure on the tribological properties of the friction component in a wet multi-disc clutch during the running-in process.
Abstract
Purpose
This paper aims to explore the influence of applied pressure on the tribological properties of the friction component in a wet multi-disc clutch during the running-in process.
Design/methodology/approach
The running-in evolutionary was explored in terms of global friction performance. The variation of friction torque and mean COF of the initial 300 engagement cycles was obtained by full-scale tests. Finally, an optical microscope was used to detect the wear characteristics of friction surfaces.
Findings
The applied pressure showed a significant influence on the tribological behaviors of wet clutches during the running-in process. The mean COF decreased and then increases with the increase of the applied pressure. A higher applied pressure contributed to more asperity summits being sheared, thus resulting in a smoother surface. Considering a suitable wore performance, properly applied pressure is necessary.
Originality/value
The results provide theoretical guidance for selecting the optimal applied pressure in the running-in of wet clutches.
Peer review
The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-08-2022-0256/
Details
Keywords
This study aims to develop a Web-based application system called Infomediary of Taiwanese Indigenous Peoples (ITIP) that can help individuals comprehend the society and culture of…
Abstract
Purpose
This study aims to develop a Web-based application system called Infomediary of Taiwanese Indigenous Peoples (ITIP) that can help individuals comprehend the society and culture of indigenous people. The ITIP is based on the use of Semantic Web technologies to integrate a number of data sources, particularly including the bibliographic records of a museum. Moreover, an ontology model was developed to help users search cultural collections by topic concepts.
Design/methodology/approach
Two issues were identified that needed to be addressed: the integration of heterogeneous data sources and semantic-based information retrieval. Two corresponding methods were proposed: SPARQL federated queries were designed for data integration across the Web and ontology-driven queries were designed to semantically search by knowledge inference. Furthermore, to help users perform searches easily, three searching interfaces, namely, ethnicity, region and topic, were developed to take full advantage of the content available on the Web.
Findings
Most open government data provides structured but non-resource description framework data, Semantic Web consumers, therefore, require additional data conversion before the data can be used. On the other hand, although the library, archive and museum (LAM) community has produced some emerging linked data, very few data sets are released to the general public as open data. The Semantic Web’s vision of “web of data” remains challenging.
Originality/value
This study developed data integration from various institutions, including those of the LAM community. The development was conducted based on the mode of non-institution members (i.e. institutional outsiders). The challenges encountered included uncertain data quality and the absence of institutional participation.
Details
Keywords
Abstract
Purpose
This paper aims to study and compare the friction stability of wet paper-based clutches with regard to the radial grooves (RG) and waffle grooves (WG).
Design/methodology/approach
This paper presents an experimental study of a wet clutch concerning the effect of groove patterns on the friction torque and surface temperature. The friction stabilities of RG and WG are investigated with the applied pressure, rotating speed and automatic transmission fluid (ATF) temperature taken into consideration.
Findings
The friction torque and surface temperature of WG are larger than those of RG under the same operating condition. The friction torque difference between RG and WG grows with the increase of applied pressure and narrows with the increase of ATF temperature. Additionally, their temperature difference expands via increasing the rotating speed and ATF temperature or reducing the applied pressure; in this way, not only the variable coefficient difference between RG and WG can be narrowed, but also the friction stability of the clutch can be improved dramatically.
Originality/value
This paper explains the thermodynamic differences between RG and WG; moreover, it is verified experimentally that WG has a better friction stability than RG.
Details
Keywords
Haixu Yang, Feng Zhu, Haibiao Wang, Liang Yu and Ming Shi
The purpose of this paper is to describe the structure of nonlinear dampers and the dynamic equations, and nonlinear realization principles and optimize the parameters of…
Abstract
Purpose
The purpose of this paper is to describe the structure of nonlinear dampers and the dynamic equations, and nonlinear realization principles and optimize the parameters of nonlinear dampers. Using the finite element method to analyze the seismic performance of the frame structure with shock absorber.
Design/methodology/approach
The nonlinear shock absorber was installed in a six-storey reinforced concrete frame structure to study its seismic performance. The main structure was designed according to the eight degree seismic fortification intensity, and the time history dynamic analysis was carried out by Abaqus finite element software. EL-Centro, Taft and Wenchuan seismic record were selected to analyze the seismic response of the structure under different magnitudes and different acceleration peaks.
Findings
Through the principle study and parameter analysis of the nonlinear shock absorber, combined with the finite element simulation results, the shock absorption performance and shock absorption effect of the nonlinear energy sink (NES) nonlinear shock absorber are given as follows: first, the damping of the NES shock absorber is satisfied, and the linear spring stiffness and nonlinear stiffness of the shock absorber are based on the relationship k1=kn×kl2, so that the spring design length is fixed, and the linear stiffness of the shock absorber can be obtained. The nonlinear shock absorber has the characteristics of high rigidity and frequency bandwidth, so that the frequency is infinitely close to the frequency of the main structure, and when the mass of the shock absorber satisfies between 0.056 and 1, a good shock absorption effect can be obtained, and the reinforced concrete with the shock absorber is obtained. The frame structure can effectively reduce the seismic response, increase the natural vibration period of the structure and reduce the damage loss of the structure. Second, the spacer and each additional shock absorber have a small difference in shock absorption effect. After the shock absorber parameters are accurately calculated, the number of installations does not affect the shock absorption effect of the structure. Therefore, the shock absorber is properly constructed and accurately calculated. Parameters can reduce costs.
Originality/value
New shock absorbers reduce earthquake-induced damage to buildings.
Details
Keywords
Jianhua Liu, Zibo Wu, Jiajia Liu and Yao Zou
In order to solve the problem of how to reduce the service delay of edge computing, this paper proposes an edge cloud framework, which contains four groups under different…
Abstract
Purpose
In order to solve the problem of how to reduce the service delay of edge computing, this paper proposes an edge cloud framework, which contains four groups under different locations between mobile edge nodes and users. A feasible cost scheme can be obtained by calculating the cost in different simulation groups. Furthermore, we give suggestions on how to deploy edge nodes at a reasonable cost for users effectively.
Design/methodology/approach
This paper is motivated by the IoT-Cloud framework; they are divided according to whether the nodes have templates required by users and the distance from users to distinguish various consumption levels and classify the testing result. Based on four different groups satisfying reasonable resource allocation, the cost was studied. The work focuses on the unpredictable movement within the test range. For assignment and scheduling of template tasks at each time slot, the Edge-Cloud scheme is proposed to reduce the cost.
Findings
According to the simulation results in this paper, the total cost of the four groups is lower when the closest node-set satisfies the user service directly. To improve the probability that the closest node-set can meet general requests of users and provide them with faster and more economical network services, increasing the number of edge nodes within the range of user activities is suggested.
Originality/value
An Edge-Cloud framework is constructed in four groups, and the conclusion of a feasible cost scheme came out.
Details
Keywords
Yaoyao Ma, Qiang Miao, Wenping Liang, Haiyang Yu, Mengjuan Yin, Kai Zang, Xueqing Pang and Xianfeng Wang
The purpose of this paper is to obtain the optimal N2/Ar ratio parameters for preparing Ta (C, N) coating. Three coatings with different N2/Ar ratios were prepared on the TA15…
Abstract
Purpose
The purpose of this paper is to obtain the optimal N2/Ar ratio parameters for preparing Ta (C, N) coating. Three coatings with different N2/Ar ratios were prepared on the TA15 substrate, and their effects on the wear properties of the coatings were discussed.
Design/methodology/approach
Ta(C, N) coatings with three different N2/Ar ratios were prepared on TA15 substrates using the double cathode glow metallurgical plasma alloying technique (DGMPA) using a step-by-step diffusion method.
Findings
With the increase of N2/Ar flow ratio, the hardness and elastic modulus of the coating first increase and then decrease. Compared with the S1 sample (N2/Ar gas ratio 25: 75) and the S3 sample (N2/Ar gas ratio 75: 25), the S2 sample (N2/Ar gas ratio 50: 50) has better mechanical properties, with hardness increased by 48.45% and 6.8%, respectively, and elastic strain ratio increased by 22.8% and 28.5%, respectively. Moreover, the wear degree of the S2 sample is less than other samples. The wear rate of the S2 sample was 32.4% lower than the S3 sample at 300°C and 14.3% lower than the S3 sample at 500°C. Therefore, the S2 sample has the best mechanical properties and the best high temperature wear resistance.
Originality/value
Ta(C, N) coatings were prepared by DGMPA technology, and the wear mechanism of Ta(C, N) coatings with different N2/Ar ratios was investigated to reduce the wear rate.
Details
Keywords
Chih-Chin Liang and Annie Pei-I Yu
Impulse purchases are a phenomenon of interest in recent years that provides a high revenue stream for companies compared to planned purchases. Airports are a unique shopping…
Abstract
Purpose
Impulse purchases are a phenomenon of interest in recent years that provides a high revenue stream for companies compared to planned purchases. Airports are a unique shopping environment. Travellers usually need to arrive at the airport early and can only utilise limited time to shop at duty-free stores, which makes the shopping experience time-constrained and has the potential to make impulse purchases. The main purpose of this research is to create a model to examine whether “time pressure” and “hedonic shopping motivation” lead to impulse shopping through the formation of “positive emotion” in the context of airport duty-free shops.
Design/methodology/approach
A questionnaire-based survey was conducted in this study. The data collection for this study targeted individuals who had previously used airline services for international travel and visited duty-free shops at international airports. A total of 502 valid subjects participated in this survey.
Findings
The findings indicated that time pressure and consumers’ hedonic motivations have a positive impact on emotions. Positive emotions have a positive impact on the occurrence of impulse purchases. Music and light can moderate the impact of hedonic motivation on emotion but cannot reduce the influence of time pressure on emotion. Social factor significantly moderates the positive association between hedonic shopping motivation and emotion.
Originality/value
The research collected data from various international airports and social media, enabling the findings to be generalised.
Details
Keywords
Abdul Rehman, Mohammad Hassan Shirani Bidabadi, Liang Yang, Zheng Yu, Chen Hao, Chi Zhang and Zhigang Yang
This study aims to optimise the effect of pre-oxidation on hot corrosion behaviour of Tribaloy T-900 at 900 °C in mixed Na2SO4 and K2SO4.
Abstract
Purpose
This study aims to optimise the effect of pre-oxidation on hot corrosion behaviour of Tribaloy T-900 at 900 °C in mixed Na2SO4 and K2SO4.
Design/methodology/approach
Prior to hot corrosion experiment, pre-oxidation treatments were carried in ambient air at 900 °C for 1, 5 and 10 h, respectively. The hot corrosion experiments were performed in a box type furnace at 900 °C. Both surfaces of specimens were brushed with saturated salt solution of 75 wt.% Na2SO4 + 25 wt.% K2SO4. After brushing, the salt-coated specimens were placed in electric stove to ensure drying of salt. After drying, presence of 3 mg/cm2 salt on specimen’s surface was ensured through weighting.
Findings
The 1-h pre-oxidation treatment prior to hot corrosion showed superior hot corrosion resistance against molten salt attack. An optimum pre-oxidation time of 1 h helped timely formation of protective Cr2O3 layer and inhibited the formation of less stable and porous surface oxides of Ni and Mo during hot corrosion.
Originality/value
Pre-oxidation effect on hot corrosion behaviour of refractory metal (such as Mo in investigated alloy) containing alloy has never been reported previously. Refractory metals oxide (e.g. MoO3) could transform the corrosion phenomena to catastrophic failure through acidic fluxing.
Details