Search results

The purpose of this paper is to study the high-frequency impacts of fast switching wide-bandgap transistors on electronic and motor designs. The high-frequency power converters, dedicated to driving high-speed motors, require specific models to design predictively electronic and motors.

From magnetic and electric models, the high-frequency parasitic elements for both electronics and motor are determined. Then, high-frequency circuit models accounting for of parasitic element extractions are built to study the wide bandgap transistors commutations and their impacts on motor windings.

The results of the models, for electronics and motors, are promising. The high-frequency commutation cell study is used to optimize the layouts and to improve the commutation behaviours and performances. The impact of the switching speed is highlighted on the winding voltage susceptibility. Then, the switching frequency and commutation rapidity can be both optimized to increase the performance of motor and electronics. The electronic model is validated by experimentations.

The method can be only applied to the existing motor and electronic designs. It is not taken into account in an automized global high-frequency optimizer.

Helped by magnetic and electric FEA calculations where the parasitic element extractions are performed. The switching frequency and commutation rapidity can be both optimized to increase the performance of motor and electronics.

A framework for reliable modeling of high-frequency structures by nested kriging with an improved sampling procedure is developed and extensively validated. A comprehensive benchmarking including conventional kriging and previously reported design of experiments technique is provided. The proposed technique is also demonstrated in solving parameter optimization task.

The keystone of the proposed approach is to focus the modeling process on a small region of the parameter space (constrained domain containing high-quality designs with respect to the selected performance figures) instead of adopting traditional, hyper-cube-like domain defined by the lower and upper parameter bounds. A specific geometry of the domain is explored to improve a uniformity of the training data set. In consequence, the predictive power of the model is improved.

Building the model in a constrained domain allows for a considerable reduction of a training data set size without a necessity to either narrow down the parameter ranges or to reduce the parameter space dimensionality. Improving uniformity of training data set allocation permits further reduction of the computational cost of setting up the model. The proposed technique can be used to expedite the parameter optimization and enables locating good initial designs in a straightforward manner.

The developed framework opens new possibilities inaccurate surrogate modeling of high-frequency structures described by a large number of geometry and/or material parameters. Further extensions can be investigated such as the inclusion of the sensitivity data into the model or exploration of the particular geometry of the model domain to further reduce the computational overhead of training data acquisition.

The efficiency of the proposed method has been demonstrated for modeling and parameter optimization of high-frequency structures. It has also been shown to outperform conventional kriging and previous constrained modeling approaches. To the authors’ knowledge, this approach to formulate and handle the modeling process is novel and permits the establishment of accurate surrogates in highly dimensional spaces and covering wide ranges of parameters.

The purpose of this paper is to help high frequency circuit designers understand how to choose the best permittivity value for a laminate material for accurate modeling.

In this paper, experimental measurements of the performance of simple circuits are compared to various mathematical and software models.

Higher permittivity values were obtained using samples with bonded copper foil compared to samples etched free of foil. These higher values yielded better agreement between measured and modelled performance using current automated design software. High profile foil on thin laminates was found to increase the surface impedance of the conductor and change the propagation constant and apparent permittivity of the laminate by 15 percent or more. It was also demonstrated that, under some circumstances, the anisotropy of the substrate could result in differences in measured and modelled performance.

Only a limited number of circuit laminate materials were closely examined. Future work should include a wider variety of laminates.

The paper details the magnitude of the effects of test method, conductor profile and substrate anisotropy on the values of a material's permittivity best suited for circuit design purposes.

This paper seeks to consider the design of small, naturally cooled, and high‐frequency (in excess of 10 kHz) inductors. Its purpose is to show that the design of such inductors can be obtained from the solution of a signomial program. In its most general form, the signomial program calls for minimising the total mass (or cost) of the inductor whilst ensuring the satisfaction of the inductance value together with constraints imposed by the copper fill‐factor, the allowed temperature rise, Kirchhoff's mmf law, and the core flux density.

The signomial program is solved using a sequential geometric programming (SGP) approach specifically tailored to the inductor design problem. In essence, SGP seeks a constrained minimum mass (or cost) solution by optimally setting the inductor geometry parameters, the air‐gap length, and the relevant electrical and magnetic quantities.

Design results reveal that including the inductor geometry parameters in the set of problem variables leads to significant savings in the inductor mass (or cost).

In cases where there are restrictions on the inductor weight, the optimal solution of the signomial program can be used for manufacturing inductors having cores with non‐standard sizes. In other applications where core dimensions are chosen from the manufacturer's database, the SGP approach can be used to complete the design by either maximising the inductance value or minimising the total loss whilst enforcing a given inductance value.

This work presents a first attempt to optimise an inductor design via signomial programming. The proposed solution methodology is based on SGP, but specifically adapted to the inductor design problem.

Significant achievements in ferrite material processing enable developments of many ferrite devices with a wide range of power levels and working frequencies, which make demands for new characterization and modelling methods for ferrite materials and components. The purpose of this paper is to introduce a modelling and measurement procedure, which can be used for the characterization of two‐port ferrite components in high frequency range.

This paper presents a commercially available ferrite component (transformer) modelling and determination of its electrical parameters using in‐house developed software. The components are measured and characterized using a vector network analyzer E5071B and adaptation test fixture on PCB board. The parameters of electrical equivalent circuit of the ferrite transformer parameters are compared with values extracted out of measured scattering parameters.

A good agreement between modelled and extracted electrical parameters of the ferrite transformer is found. The modelled inductance curves have the same dependence versus frequency as extracted ones. That confirms the model validity in the wide frequency range.

In‐house developed software based on proposed model provides inclusion of the ferrite material dispersive characteristics, which dominantly determines high‐frequency behaviour of two‐port ferrite components. Developed software enables fast and accurate calculation of the ferrite transformer electrical parameters and its redesign in order to achieve the best performance for required application.

Island attack and defense, emergency rescue, scientific research, civilian fisheries and other fields are inseparable from timely, high-quality underwater communications. However light and other electromagnetic waves are severely attenuated in water, acoustic is currently the only energy carrier that can transmit signals over long distances in water. However, the complex water environment and serious interference bring serious challenges to underwater activities using underwater acoustic sensors-hydroacoustic transducers. Thus, this paper aims to develop a class of high reception sensitivity hydroacoustic transducer structures to provide research and utilization ideas for related scholars.

The electromechanical coupling coefficient is improved by converting the thickness vibration mode of the piezoelectric ceramic into the longitudinal vibration mode of the piezoelectric pillars array, and no polymer is added between the piezoelectric pillars array to reduce lateral coupling as well as internal friction, which can thus reduce the energy losses. Radial stacking in parallel can also enhance the charge generated through the positive piezoelectric effect. The optimal parameters of the structure are determined by equivalent circuit method and finite element analysis, and a hydroacoustic transducer of this structure is fabricated finally.

According to the standard test procedure, the hydroacoustic transducer was tested in water. The tests show that the conductance curve of the stacked high-sensitivity hydroacoustic transducer tested in the air is in good agreement with the simulation results. The resonant frequency is about 118 kHz, and the receiver sensitivity is −166 dB. The stacked material hydroacoustic transducer is in the high-frequency range and has a much higher sensitivity (−166 dB) than many types of hydroacoustic transducers fabricated by piezoelectric ceramic (less than −200 dB).

Although the stacked high-sensitivity hydroacoustic transducer that the authors have fabricated has a performance improvement, it has a limitation. The hollow design of the pillar arrays increases the reception stress on each pillar, and the imposed pressure comes from water also increases simultaneously, so the depth of water that the stacked high-sensitivity hydroacoustic transducer can operate in may be slightly shallower than that made of a pure piezoelectric ceramic block or a piezoelectric ceramic material with polymer added. This will be a problem to be solved in a future deployment.

Whether it is marine scientific research or in various fields such as civil recreation and fishing, hydroacoustic communication and necessary underwater exploration are indispensable for acoustic waves. The hydroacoustic transducer is the sensor that sends and receives sound waves, so a lot of water equipment, such as yachts, sonar buoys, and so on, cannot be separated from the hydroacoustic transducer. In addition, the complexity of the water environment also requires a good performance of the hydroacoustic transducer to facilitate the convenience and effectiveness of subsequent signal processing. Therefore, hydroacoustic transducers have great market and commercial value.

Hydroacoustic transducers are not only of great commercial value but also have a significant impact on the military as well as on people’s livelihood. As we all know, in the area of submarine communication and underwater exploration, sonar is the main force. The performance of the hydroacoustic transducer directly affects the performance of the hydroacoustic signal processing system, and ultimately directly determines the success or failure of the mission. In addition, the large-scale replacement of hydroacoustic transducers on equipment requires the concerted efforts of a large number of practitioners, such as material scientists, structural scientists, mathematicians and so on. Therefore, the rise of hydroacoustic transducers has given rise to a large number of learning positions as well as employment positions.

To enhance the reception sensitivity of the hydroacoustic transducer, the authors have optimized the existing hydroacoustic transducer materials and structures to propose a stacked sensitive element, which can effectively enhance the electromechanical conversion coefficient of the piezoelectric material. Furthermore, the authors have manufactured a hydroacoustic transducer using the proposed stacked sensitive element. The test results of the hydroacoustic transducer also show that the designed stacked sensitive element is of great help to enhance the reception sensitivity of the hydroacoustic transducer.

The purpose of this paper is to study the multi-objective optimization design method of high-power high-frequency magnetic-resonance air-core transformer (ACT).

First, this paper studies the interleaved winding technology, the process of modeling and simulation, the calculation method of high-frequency loss of Litz wire and the design of magnetic shielding in detail. Second, the multi-objective optimization design process of high-frequency magnetic-resonance ACT is established by parametric scanning method and orthogonal experiment method.

An ACT model of 2 kV/100 kW/81.34 kHz was designed. The efficiency, weight power density and volume power density are 99.61%, 21.6 kW/kg and 5.1 kW/kg, respectively. Finally, the multi-physical field coupling simulation method is used to calculate the port excitation voltages and currents and temperature field of ACT. The maximum temperature of the ACT is 95.5 °C, which meets the design requirements.

The above research provides guidance and basis for the optimization design of high-power high-frequency magnetic-resonance ACT.

The purpose of this paper is to design a suitable guard trace to reduce the electromagentic interference between two closely spaced high frequency transmission lines. A novel cross-shaped resonator combined via fence is passed down to alleviate far-end and near-end crosstalk (NEXT) in tightly coupled high-speed transmission lines. The distance between the adjacent transmission lines is increased stepwise as a function of trace width.

A rectangular-shaped resonator via fence is connected by a guard trace has been proposed to overcome the coupling between the traces that is separated by 2 W. Similarly, by creating a cross-shaped resonator via fence connected by guard trace that reduces the spacing further by 1.5 W.

A tightly coupled transmission line structure that needs separation by a designed unit cell structure. Further research needs to be conducted to improve the NEXT, far-end crosstalk (FEXT) and spacing between the transmission lines.

This study portrays a novel method that combines the resonators via fence with a minimum spacing between the tightly coupled transmission lines which reduce the NEXT and FEXT; thereby reducing the size of the routing area. The resultant test structures are characterized at high frequencies using time domain and frequency domain analysis. The following scattering parameters such as insertion loss, NEXT and FEXT of the proposed method are measured as 1.504 dB, >30 dB and >20 dB, respectively.

The results of an empirical investigation into the design and fabrication of high frequency planar thick‐film transformers for use in resonant mode power supplies are reported. A 50 W planar transformer design which realises efficiencies in excess of 90% is presented. The findings are used in order to establish an understanding between winding topologies and dimensions and the physical planar transformer parameters.