Search results

The study aims to show the influence of selected mechanical parameters of the rotor on the maximum speed and parameters of the electric motor.

A simplified mechanical analysis of the rotor of the electric motor was conducted, determining the safety factor of the motor. An analysis of the impact of key rotor parameters (significant from the mechanical strength perspective) on the electromagnetic parameters and the safety factor of the selected high-speed electric motor was carried out. The influence of changes in the rotor’s geometrical dimensions (centrifugal force) on the electromagnetic parameters of the electric motor was shown.

The study shows the impact of changes in selected rotor parameters on electromagnetic parameters and the safety factor of a high-speed electric motor (at its required operating point of 45,000 rpm). The dependence of the safety factor as a function of the maximum motor speed was determined for the proposed rotor modifications.

The proposed modifications can be used in larger drive systems. They have practically no impact on increasing the value of the motor’s moment of inertia (they do not degrade the dynamics of the motor’s operation).

It was proposed to use a new design coefficient which is in relation to the motor’s safety coefficient. It has been shown that a minimal modification of the motor rotor allows to increase its maximum speed by several dozen per cent (while maintaining the safety factor). It has also been shown that when operating at maximum speed within the safe range, the change in the geometrical dimensions of the rotor hardly influences the change in the value of the centrifugal force.

The purpose of this study is to explore how a time-varying electromagnetic stirring (EMS) affects the fluid flow and solidification behavior in a slab caster continuous casting mold. Further, the study of inclusion movements in the mold is carried out under the effect of a time-varying electromagnetic field.

A three-dimensional coupled numerical model of solidification and magnetohydrodynamics has been developed for slab caster mold to investigate the inclusions transport by discrete phase model with the use of user-defined functions. Enthalpy porosity and the Lagrangian approach are applied to analyze the behavior of solidification and inclusion.

The study shows that the magnetic field density distribution has a radial symmetry in relation to the stirrer’s center. As the EMS current intensity increases, the strength of the lower recirculation zone gradually decreases and nearly disappears at higher intensities. Additionally, the area of localized remelting zone expands in the solidification front with rising current intensity. The morphology of inclusions and EMS current intensity have a significant impact on the behavior and movement of inclusions within the molten steel.

By using the model, one can optimize the EMS parameter to enhance the quality of steel casting through the elimination of impurities and by improving the microstructure of cast that mainly depend on solidification and flow patterns of molten steel.

Until now, the use of time-varying EMS in the slab caster mold to study solidification and inclusion behavior has not been explored.

This paper aims to propose an energetic model parameter calculation method for predicting the materials’ symmetrical static hysteresis loop and asymmetrical minor loop to improve the accuracy of electromagnetic analysis of equipment.

For predicting the symmetrical static hysteresis loop, this paper deduces the functional relationship between magnetic flux density and energetic model parameters based on the materials’ magnetization mechanism. It realizes the efficient and accurate symmetrical static hysteresis loop prediction under different magnetizations. For predicting the asymmetrical minor loop, a new algorithm is proposed that updates the energetic model parameters of the asymmetrical minor loop to consider the return-point memory effect.

The comparison of simulation and experimental results verifies that the proposed parameters calculation method has high accuracy and strong universality.

The proposed parameter calculation method improves the existing parameter calculation method’s problem of relying on too much experimental data and inaccuracy. Consequently, the presented work facilitates the application of the finite element electromagnetic field analysis method coupling the hysteresis model.

This study aims to model and investigate low-loss wave-propagation modes across random media. The objective is to achieve better channel properties for applying radio links through random vegetation (e.g. forest) using a beamforming approach. Thus, obtaining the link between the statistical parameters of the media and the channel properties.

A beamforming approach is used to obtain low-loss propagation across random media constructed of long cylinders, i.e. a simplified two dimensional (2D) model of agroforests. The statistical properties of the eigenmode radio wave propagation are studied following a Monte Carlo method. An error quantity is defined to represent the robustness of an eigenmode, and it is shown that it follows a known Lognormal statistical distribution, thereby providing a base for further statistical investigations.

In this study, it is shown that radio wave propagation eigenmodes exist based on a mathematical model. The algorithm presented can find such modes of propagation that are less affected by the statistical variation of the media than the regular beams used in radio wave communication techniques. It is illustrated that a sufficiently chosen eigenmode waveform is not significantly perturbed by the natural variation of the tree trunk diameters.

As a new approach to obtain low-loss propagation in random media at microwave frequencies, the presented mathematical model can calculate scattering-free wave-propagation eigenmodes. A robustness quantity is defined for a specific eigenmode, considering a 2D simplified statistical forest example. This new robustness quantity is useful for performing computationally low-cost optimization problems to find eigenmodes for more complex vegetation models.

This paper aims to develop a new 3D analytical model in cylindrical coordinates to study radial flux eddy current couplers (RFECC) while considering the magnetic edge and 3D curvature effects, and the field reaction due to the induced currents.

The analytical model is developed by combining two formulations. A magnetic scalar potential formulation in the air and the magnets regions and a current density formulation in the conductive region. The magnetic field and eddy currents expressions are obtained by solving the 3D Maxwell equations in 3D cylindrical coordinates with the variable separation method. The torque expression is derived from the field solution using the Maxwell stress tensor. In addition to 3D magnetic edge effects, the proposed model takes into account the reaction field effect due to the induced currents in the conducting part. To show the accuracy of the developed 3D analytical model, its results are compared to those from the 3D finite element simulation.

The obtained results prove the accuracy of the new developed 3D analytical model. The comparison of the 3D analytical model with the 2D simulation proves the strong magnetic edge effects impact (in the axial direction) in these devices which must be considered in the modelling. The new analytical model allows the magnetic edge effects consideration without any correction factor and also presents a good compromise between precision and computation time.

The proposed 3D analytical model presents a considerably reduced computation time compared to 3D finite element simulation which makes it efficient as an accurate design and optimization tool for radial flux eddy current devices.

A new analytical model in 3D cylindrical coordinates has been developed to find the electromagnetic torque in radial flux eddy current couplers. This model considers the magnetic edge effects, the 3D curvature effects and the field reaction (without correction factors) while improving the computation time.

The calculation of electromagnetic fields can involve many degrees of freedom (DOFs) to achieve accurate results. The DOFs are directly related to the computational effort of the simulation. The effort is decreased by using the proper generalized decomposition (PGD) and proper orthogonalized decomposition (POD). The purpose of this study is to combine the advantages of both methods. Therefore, a hybrid enrichment strategy is proposed and applied to different electromagnetic formulations.

The POD is an a-priori method, which exploits the solution space by decomposing reference solutions of the field problem. The disadvantage of this method is given by the unknown number of solutions necessary to reconstruct an accurate field representation. The PGD is an a-priori approach, which does not rely on reference solutions, but require much more computational effort than the POD. A hybrid enrichment strategy is proposed, based on building a small POD model and using it as a starting point of the PGD enrichment process.

The hybrid enrichment process is able to accurately approximate the reference system with a smaller computational effort compared to POD and PGD models. The hybrid enrichment process can be combined with the magneto-dynamic T-Ω formulation and the magnetic vector potential formulation to solve eddy current or non-linear problems.

The PGD enrichment process is improved by exploiting a POD. A linear eddy current problem and a non-linear electrical machine simulation are analyzed in terms of accuracy and computational effort. Further the PGD-AV formulation is derived and compared to the PGD-T-Ω reduced order model.

The purpose of this paper is to determine the electric field and specific absorption rate (SAR) distribution within biological tissues in the vicinity of dental implants, exposed to the mobile phone radiation.

This research was performed for the frequency of 2.6 GHz, which corresponds to 4G mobile network. The adequate 3D realistic numerical models of the mobile phone user’s head, dental implants and actual smartphone model are created using packages based on the finite integral technique numerical method.

The obtained results yield to a conclusion that the presence of dental implants affects the increase in electric field intensity and SAR values within biological tissues in its vicinity.

The presented procedure is limited to the 4G mobile network frequency of 2.6 MHz. The study should be extended to other mobile network frequencies to be more general.

The criteria for selection of the materials used for dental implants production should be extended with the recommended material characteristics related to their influence on the electric field and SAR distribution, to keep their values in the limits prescribed by standards.

The obtained results provide the foundation for future research in mobile devices’ electromagnetic fields’ influence on human health.

The accurate determination of the electric field and SAR values within different biological tissues and organs in the vicinity of dental implants exposed to mobile phone electromagnetic radiation, demands highly realistic model of observed biological structures. For purposes of the current study, the procedure for modeling of highly nonhomogeneous structure with finite number of homogenous domains having known electromagnetic parameters is described in the paper. As a result, the 3D complex users’ head model formed of 16 homogeneous domains of different electromagnetic parameters is created.

The purpose of this paper is to present the influence of inter-turn short circuit faults (ITSF) on electromagnetic vibration in high-voltage line-starting permanent magnet synchronous motor (HVLSPMSMS).

In this paper, the ampere–conductor wave model of HVLSPMSM after ITSF is established. Second, a mathematical model of the magnetic field after ITSF is established, and the influence law of the ITSF on the air-gap magnetic field is analyzed. Further, the mathematical expression of the electromagnetic force density is established based on the Maxwell tensor method. The impact of HVLSPMSM torque ripple frequency, radial electromagnetic force spatial–temporal distribution and rotor unbalanced magnetic tension force by ITSF is revealed. Finally, the electromagnetic–mechanical coupling model of HVLSPMSM is established, and the vibration spectra of the motor with different degrees of ITSF are solved by numerical calculation.

In this study, it is found that the 2np order flux density harmonics and (2 N + 1) p order electromagnetic forces are not generated when ITSF occurs in HVLSPMSM.

By analyzing the multi-harmonics of HVLSPMSM after ITSF, this paper provides a reliable method for troubleshooting from the perspective of vibration and torque fluctuation and rotor unbalanced electromagnetic force.

The purpose of this study is to develop an efficient model to solve the electromagnetic forward problem using a novel semi-analytical approach to compute the electromagnetic fields because of the presence of a scatterer.

The proposed model involves a novel formulation of a complete orthonormal set of radiating/nonradiating polarization currents. Furthermore, an integral equation-based representation is derived, and the appropriate boundary conditions are imposed to get the scattered electromagnetic field. An error term is introduced to evaluate the obtained results.

The proposed model was tested using several examples at different frequencies. The results of this study show that the novel representation exhibits fast convergence behavior and achieves highly accurate results, when compared to the results provided by the transmission line method.

The derived formulations presented in this study are significant in the electromagnetic forward modelling field because of the meaningful physical representation they provide. This is an important aspect that leads to precise calculation of electromagnetic fields for various applications.

Electric motor heating during biomass recovery and its handling on conveyor is a serious concern for the motor performance. Thus, the purpose of this paper is to design and develop a hardware prototype of master–slave electric motors based biomass conveyor system to use the motors under normal operating conditions without overheating.

The hardware prototype of the system used master–slave electric motors for embedded controller operated robotic arm to automatically replace conveyor motors by one another. A mixed signal based embedded controller (C8051F226DK), fully compliant with IEEE 1149.1 specifications, was used to operate the entire system. A precise temperature measurement of motor with the help of negative temperature coefficient sensor was possible due to the utilization of industry standard temperature controller (N76E003AT20). Also, a pulse width modulation based speed control was achieved for master–slave motors of biomass conveyor.

As compared to conventional energy based mains supply, the system is self-sufficient to extract more energy from solar supply with an energy increase of 11.38%. With respect to conventional energy based \ of 47.31%, solar energy based higher energy saving of 52.69% was reported. Also, the work achieved higher temperature reduction of 34.26% of the motor as compared to previous cooling options.

The proposed technique is free from air, liquid and phase-changing material based cooling materials. As a consequence, the work prevents the wastage of these materials and does not cause the risk of health hazards. Also, the motors are used with their original dimensions without facing any leakage problems.