Search results

Transfer relations represent analytical solutions of the linear theory of circular arches, relating each one of the kinematic and static variables at an arbitrary cross-section to the kinematic and static variables at the initial cross-section. The purpose of this paper is to demonstrate the significance of the transfer relations for structural analysis by means of three examples taken from civil engineering.

The first example refers to an arch bridge, the second one to the vault of a metro station and the third one to a real-scale test of a segmental tunnel ring.

The main conclusions drawn from these three examples are as follows: increasing the number of hangers/columns of the investigated arch bridge entails a reduction of the maximum bending moment of the arch, allowing it to approach, as much as possible, the desired thrust-line behavior; compared to the conventional in situ cast method, a combined precast and in situ cast method results in a decrease of the maximum bending moment of an element of the vault of the studied underground station by 46%; and the local behavior of the joints governs both the structural convergences and the bearing capacity of the tested segmental tunnel ring.

The three examples underline that the transfer relations significantly facilitate computer-aided engineering of circular arch structures, including arch bridges, vaults of metro stations and segmental tunnel rings.

This study aims to research the development trend, research status, research results and existing problems of the steel–concrete composite joint of railway long-span hybrid girder cable-stayed bridge.

Based on the investigation and analysis of the development history, structure form, structural parameters, stress characteristics, shear connector stress state, force transmission mechanism, and fatigue performance, aiming at the steel–concrete composite joint of railway long-span hybrid girder cable-stayed bridge, the development trend, research status, research results and existing problems are expounded.

The shear-compression composite joint has become the main form in practice, featuring shortened length and simplified structure. The length of composite joints between 1.5 and 3.0 m has no significant effect on the stress and force transmission laws of the main girder. The reasonable thickness of the bearing plate is 40–70 mm. The calculation theory and simplified calculation formula of the overall bearing capacity, the nonuniformity and distribution laws of the shear connector, the force transferring ratio of steel and concrete components, the fatigue failure mechanism and structural parameters effects are the focus of the research study.

This study puts forward some suggestions and prospects for the structural design and theoretical research of the steel–concrete composite joint of railway long-span hybrid girder cable-stayed bridge.

Cables are ubiquitous in electronic-based systems. Electromagnetic emission of cables and crosstalk between wires is an important issue in electromagnetic compatibility and is to be minimized in the design phase. To facilitate the design, models of different complexity and accuracy, for instance, circuit models or finite element (FE) simulations, are used. The purpose of this study is to compare transmission line parameters obtained by measurements and simulations.

Transmission line parameters were determined by means of measurements in the frequency and time domain and by FE simulations in the frequency domain and compared. Finally, a Spice simulation with lumped elements was performed.

The determination of the effective permittivity of insulated wires seems to be a key issue in comparing measurements and simulations.

A space decomposition technique for a guided wave on an infinite configuration with constant cross-section has been introduced, where an analytic representation in the direction of propagation is used, and the transversal fields are approximated by FEs.

The traction cable is paralleled with the existing traction network of electrified railway through transverse connecting line to form the scheme of long distance power supply for the traction network. This paper aims to study the scheme composition and power supply distance (PSD) of the scheme.

Based on the structure of parallel traction network (referred to as “cable traction network (CTN)”), the power supply modes (PSMs) are divided into cable + direct PSM and cable + autotransformer (AT) PSM (including Japanese mode, French mode and new mode). Taking cable + Japanese AT PSM as an example, the scheme of long distance power supply for CTN under the PSMs of co-phase and out-of-phase power supply are designed. On the basis of establishing the equivalent circuit model and the chain circuit model of CTN, taking the train working voltage as the constraint condition, and based on the power flow calculation of multiple train loads, the calculation formula and process for determining the PSD of CTN are given. The impedance and PSD of CTN under the cable + AT PSM are simulated and analyzed, and a certain line is taken as an example to compare the scheme design.

Results show that the equivalent impedance of CTN under the cable + AT PSM is smaller, and the PSD is about 2.5 times of that under the AT PSM, which can effectively increase the PSD and the flexibility of external power supply location.

The research content can effectively improve the PSD of traction power supply system and has important reference value for the engineering application of the scheme.

This study aims to develop an assessment strategy for fire damaged infrastructures based on the implementation of quick diagnostic techniques and consistent interpretation procedures, so to determine the residual safety margin and any need for repair works.

In this perspective, several tailored non-destructive test (NDT) methods have been developed in the past two decades, providing immediate results, with no need for time-consuming laboratory analyses. Moreover, matching their indications with the calculated effects of a tentative fire scenario allows harmonizing distinct pieces of evidence in the coherent physical framework of fire dynamics and heat transfer.

This approach was followed in the investigations on a concrete overpass in Verona (Italy) after a coach violently impacted one supporting pillar and caught fire in 2017. Technical specifications of the vehicle made it possible to bound the acceptable ranges for fire load and maximum rate of heat release, while surveillance video footage indicated the duration of the burning stage. Some established NDT methods (evaluation of discolouration, de-hydroxylation and rebar hardness) were implemented, together with advanced ultrasonic tests based on pulse refraction and pulse-echo tomography.

The results clearly showed the extension of the most damaged area at the intrados of the box girders and validated the maximum heating depth, as predicted by numerical analysis of the heat transient ensuing from the localized fire model.

This article sets out to show how principles and questions about method that underlie a way of interpreting the discipline of conservation and restoration can find results in research and studies, aiming at achieving even conscious reuse process. The occasion is the very recent research performed on the former Church of Saints Gerolamo and Francesco Saverio in Genoa, Italy, the Jesuit church annexed to the 17th-century College of the order. It is a small Baroque jewel in the heart of the ancient city, former University Library and actually abandoned, forgotten for years, inaccessible and awaiting a new use.

The two-year work carried out on the monumental building was conducted according to a study and research methodology developed and refined over the years within the activities of the School of Specialisation in Architectural Heritage and Landscape of the University of Genoa. It is a multidisciplinary and rigorous approach, which aims to train high-level professionals, up-to-date and aware of the multiple problems that interventions on existing buildings, especially of a monumental nature, involve.

The biennal study has been carried out within the activities of the Post-Graduate Programme in Architectural Heritage and Landscape of the University of Genoa. The work methodology faces the challenges of the contemporary complexity, raised by the progressive broadening of the concept of cultural “heritage” and by the problems of its conservation, its active safeguard and its reuse: safety in respect of seismic risk, fire and hydro geological instability, universal accessibility – cognitive, physical and alternative – resource efficiency, comfort and savings in energy consumption, sustainability, communication and involvement of local communities and stakeholders.

The goals of the work were the following: understanding of the architectural heritage, through the correlated study of its geometries, elements and construction materials, surfaces, structures, spaces and functions; understanding of the transformations that the building has undergone over time, relating the results of historical reconstructions from indirect sources and those of direct archaeological analysis; assessment of the state of conservation of the building recognising phenomena of deterioration, damage, faults and deficits that affect materials, construction elements, systems and structures; identification of the causes and extent of damage, faults and deficits, assessing the vulnerability and level of exposure of the asset to the aggression of environmental factors and related risks; evaluation of the compatibility between the characteristics of the available spaces, the primary needs of conservation, the instance of regeneration and possible new uses; the definition of criteria and guidelines for establishing the planning of conservation, restoration and redevelopment interventions.