Search results

This article aims to relate investments in human capital to the United Nations Sustainable Development Goals (UN SDGs), and examine the spending levels necessary to achieve high performance in related SDG sectors for Azerbaijan.

Employing data from the World Bank, the empirical approach undertaken in this study relies on peer analysis by examining spending levels for nations exhibiting similar income levels and geographical proximity to Azerbaijan.

This study estimates that total spending in education would need to increase by 0.4 percentage points of GDP by 2030, while total spending in health would need to increase by 5.9 percentage points of GDP by 2030 for Azerbaijan.

This study contributes to the literature by conducting an empirical analysis in which other nations can emulate in measuring their relative progress on human capital investments and related UN SDGs.

The peer review history for this article is available at: https://publons.com/publon/10.1108/IJSE-02-2023-0137

This paper aims to overcome the inability of both comparing loss costs and accounting for production resource losses of Overall Equipment Effectiveness (OEE)-related approaches.

The authors conducted a literature review about the studies focusing on approaches combining OEE with monetary units and/or resource issues. The authors developed an approach based on Overall Equipment Cost Loss (OECL), introducing a component for the production resource consumption of a machine. A real case study about a smart multicenter three-spindle machine is used to test the applicability of the approach.

The paper proposes Resource Overall Equipment Cost Loss (ROECL), i.e. a new KPI expressed in monetary units that represents the total cost of losses (including production resource ones) caused by inefficiencies and deviations of the machine or equipment from its optimal operating status occurring over a specific time period. ROECL enables to quantify the variation of the product cost occurring when a machine or equipment changes its health status and to determine the actual product cost for a given production order. In the analysed case study, the most critical production orders showed an actual production cost about 60% higher than the minimal cost possible under the most efficient operating conditions.

The proposed approach may support both production and cost accounting managers during the identification of areas requiring attention and representing opportunities for improvement in terms of availability, performance, quality, and resource losses.

This study aims to improve a construction company's overall project delivery by utilising lean six sigma (LSS) methods combined with building information modelling (BIM) to design, modularise and manufacture various building elements in a controlled factory environment off-site.

A case study in a construction company utilised lean six sigma (LSS) methodology and BIM to identify non-value add waste in the construction process and improve sustainability.

An Irish-based construction company manufacturing modular pipe racks for the pharmaceutical industry utilised LSS to optimise and standardise their off-site manufacturing (OSM) partners process and leverage BIM to design skids which could be manufactured offsite and transported easily with minimal on-site installation and rework required. Productivity was improved, waste was reduced, less energy was consumed, defects were reduced and the project schedule for completion was reduced.

The case study was carried out on one construction company and one construction product type. Further case studies would ensure more generalisability. However, the implementation was tested on a modular construction company, and the methods used indicate that the generic framework could be applied and customized to any offsite company.

This is one of the few studies on implementing offsite manufacturing (OSM) utilising LSS and BIM in an Irish construction company. The detailed quantitative benefits and cost savings calculations presented as well as the use of the LSM methods and BIM in designing an OSM process can be leveraged by other construction organisations to understand the benefits of OSM. This study can help demonstrate how LSS and BIM can aid the construction industry to be more environmentally friendly.

Studies show that building information modelling (BIM) technology can improve construction productivity regarding the design, construction and maintenance of a project life cycle in the 21st century. Revit has been identified as a frequently used tool for delivering BIM in the built environment. Studies about BIM technology via Revit are scarce in training middle-level workforce higher education institutions. Thus, this study aims to investigate the relevance of BIM technology and offer measures to promote digitalisation in Nigeria’s built environment polytechnic undergraduates via Revit.

Given the unexplored nature of training the middle-level workforce in Nigeria, 37 semi-structured virtual interviews were conducted across Nigeria, and saturation was achieved. The participants were knowledgeable about construction-related BIM. The researchers used a thematic analysis for the collected data and honed them with secondary sources.

Improved visualisation of design, effective and efficient work productivity, automatic design and quantification, improved database management and collaboration and data storage in the centrally coordinated model, among others, emerged as BIM’s benefits. BIM technology via Revit is challenging, especially in Nigeria’s polytechnic education curriculum. The 24 perceived issues were grouped into government/regulatory agencies-related, polytechnic management-related and polytechnic undergraduate students-related hindrances in Nigeria’s built environment.

This study is limited to BIM implications for Nigeria’s built environment polytechnic undergraduates.

This study contributes to the literature paucity in attempting to uncover perceived issues hindering the implementation of BIM technology via Revit in training Nigeria’s built environment polytechnic undergraduates via a qualitative approach.

This paper aims to map the research on management accounting (MA), clarifying its current role and identifying gaps and opportunities for future research.

In this paper, 784 papers were reviewed for the 1958–2019 period, published in 220 scientific journals indexed on Clarivate Analytics’ Web of Science (Science Citation Index Expanded [SCI-EXPANDED] and Social Sciences Citation Index [SSCI]). In the process, content analysis, regression analysis and bibliometric analysis were used.

The most relevant journals, authors and topics in MA, along with trends and patterns in the literature, were identified. Seven clusters that represent the overall thematic research structure of the MA field were also identified. This study shows that MA is becoming a multidimensional management decision-support instrument covering all organizational dimensions. As such, the research on MA is following the recent concerns with the sustainable development and digitalization of business processes.

Based on the findings of this research study, theoretical and practical implications for MA researchers were provided. These findings could also be useful to industry practitioners to improve their knowledge of emerging trends in MA practices, strategies and concepts.

Based on bibliometric and content analysis, a framework that shows an organizational, market and social context for the evolution of MA over the past 60 years was provided. It highlights the dynamics of MA alignment with organizational and external environment changes. Future research opportunities and implications for researchers and practitioners were also identified.

While previous studies have highlighted the importance of incorporating environmental sustainability in building designs, there is a paucity of studies that assess the extent to which design teams in developing countries consider environmental sustainability at the building design stage. Therefore, using Zambia as a case study, this study examined the extent to which infrastructure design teams in a developing country consider environmental sustainability at the design stage.

The study used a qualitative research approach using structured interviews because there are hardly any studies which have explored the extent to which designers incorporate environmental sustainability in infrastructure designs in developing countries. The data is analysed thematically using the ATLAS.ti software.

The results show that environmental sustainability is not an important design consideration because it is secondary to functional, technical and aesthetic considerations. Environmental considerations are also made in an ad hoc manner and when it is cost-effective for the project. Regulatory requirements pertaining to environmental protection are adhered to without any cost considerations. It was, therefore, theorised that building design teams in developing countries make technical, functional and aesthetic consideration during the infrastructure design stage ahead of environmental considerations.

There is a paucity of studies that have investigated whether building infrastructure designers consider issues of environmental sustainability at the design stage in developing countries. The findings have practical implications on how developing countries can foster environmental sustainability at the design stage and avoid generating a building infrastructure stock that will require environmental resilience adaptation in the future.

Process orientation is important for improving organizational performance. The process view is considered a key enabler of digital transformation, and thus management control systems (MCS) are expected to incorporate this view. However, the existing body of knowledge is fragmented, as different process approaches are often considered independently following a reductionist view of control practices. This paper aims to provide recommendations for further research as well as guidance for practice by a systematic review of the state of research of MC for process orientation. It is based on both a comprehensive view to MC using an MCS package approach and a comprehensive view of process orientation.

A systematic literature review addressing major types of process orientation approaches was performed by applying the comprehensive MC framework of Malmi and Brown. The results were synthesized and propositions were developed.

All components of the MC framework, as well as MCS packages, are highly relevant for process orientation. Propositions regarding configurations of MC for process orientation show directions for future research. However, comprehensive considerations of packages and of individual components, especially cultural controls, remain scarce in the literature.

To the best of the authors‘ knowledge, this paper is the first of its kind to provide a comprehensive, structured overview of MC for process orientation, applying a nonreductionist view, based on an MCS Package approach, and consolidating the so far fragmented view of different process approaches.

This study aims to assess the facilities management (FM) strategies used in multi-tenanted purpose-built office buildings (Mt-POBs) in Ghana and the drivers that influence the decision to use such strategies.

This study was conducted via a survey and key informant interviews. The survey was conducted using a questionnaire targeted at 65 multi-tenanted office building owners in the Greater Accra region. The data from the survey revealed the views of building owners on FM strategy and the extent to which 20 facility management decision drivers influenced their decisions to use a particular strategy and the responses were descriptively analysed. The key informant interviews were conducted among six leaders of the property owners’ association who use in-house FM to further understand their perspectives and decisions on using such strategy. The interviews were conducted over telephone using an interview guide and analysed using thematic analysis.

The results showed that 88% of Mt-POBs in Ghana are managed in-house. The results also showed that the decision to use the in-house strategy was driven by the innovative, strategic and cost-saving advantages associated with the in-house strategy.

This study shows the factors that drive the decision of multi-tenanted office building owners in Ghana to use the in-house strategy. The findings of this study will be useful for prospective owners of office buildings in Ghana.

This paper extends the authors’ previous research work investigating resilience for municipal infrastructure from an asset management perspective. Therefore, this paper aims to formulate a pavement resilience index while incorporating asset management and the associated resilience indicators from the authors’ previous research work.

This paper introduces a set of holistic-based key indicators that reflect municipal infrastructure resiliency. Thenceforth, the indicators were integrated using the weighted sum mean method to form the proposed resilience index. Resilience indicators weights were determined using principal components analysis (PCA) via IBM SPSS®. The developed framework for the PCA was built based on an optimization model output to generate the required weights for the desired resilience index. The output optimization data were adjusted using the standardization method before performing PCA.

This paper offers a mathematical approach to generating a resilience index for municipal infrastructure. The statistical tests conducted throughout the study showed a high significance level. Therefore, using PCA was proper for the resilience indicators data. The proposed framework is beneficial for asset management experts, where introducing the proposed index will provide ease of use to decision-makers regarding pavement network maintenance planning.

The resilience indicators used need to be updated beyond what is mentioned in this paper to include asset redundancy and structural asset capacity. Using clustering as a validation tool is an excellent opportunity for other researchers to examine the resilience index for each pavement corridor individually pertaining to the resulting clusters.

This paper provides a unique example of integrating resilience and asset management concepts and serves as a vital step toward a comprehensive integration approach between the two concepts. The used PCA framework offers dynamic resilience indicators weights and, therefore, a dynamic resilience index. Resiliency is a dynamic feature for infrastructure systems. It differs during their life cycle with the change in maintenance and rehabilitation plans, systems retrofit and the occurring disruptive events throughout their life cycle. Therefore, the PCA technique was the preferred method used where it is data-based oriented and eliminates the subjectivity while driving indicators weights.

A systematic investigation of postgraduate leadership programs for health and/or human services offered by Australian higher education institutions was undertaken.

Quantitative analysis identified the core characteristics of the programs. A thematic analysis of the course learning outcomes was conducted and six major themes of disciplinary leadership and management knowledge; research and analytical skills; professional practice; communication and collaboration; creativity and innovation; and system knowledge are shared in this study.

The authors conclude that Australian universities have taken an evidence-based approach to leadership education.

More work might need to be undertaken to ensure leadership theories are incorporated into learning outcomes.