Search results

Purpose – The purpose of this research is to study the process conditions that give best yield and expected compositions of liquid smoke products that result during the pyrolisis process relying on predetermined variables.

Design/Methodology/Approach – Pyrolisis process running times are varied, that is, 0.5, 1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, and 6 hourly. Condensing temperature maintained remained 25–30 °C. Products identification was applied by using gas chromotography mass spectroscopy.

Findings – Based on the research output, it was concluded that process conditions which give maximum yield were achieved when using double unit condenser (DUC) and time optional four hours, and it provides maximum volume liquid smoke product, and compositions of pyrolisis products. The process also created seven components, namely nepthalene, propanoic acid, 3,7 nanodiena, 2 metilguaiakol, 2-metoksi 4-methyl phenol, 4 ethyl-2 metoksil phenol, oxybanzene. Applying DUC during condensation phase may increase condensing force thereafter obtaining resulted products between 200% and 300% rather than using single unit condenser (SUC).

Research Limitations/Implications – This research was conducted on a fixed batch reactor made of a metal plate with a thickness of 3.0 mm. It carries 200 kg in capacity. In this phase, the moisture of candlenut shells might be kept in 10–12.5% wt. Process temperature applied ranged within 350–500 °C.

Originality/Value – In addition the study increased the theorical of understanding about pyrolisis process and Improving the production of liquid smoke from candlenut shell by pyrolisis process using the method of vapor condensation (Double unit condensor).

In this work, the production of ceramic moulds for aluminium casting using a stereolithographic apparatus (SLA) is presented.

Suspensions of silica powders in a photoreactive resin were used in a standard SLA equipment in order to build green parts. SLA, SLA‐250 (3D System, Valencia, CA) was modified in order to fabricate a ceramic green parts.

A characterization of mechanical properties of the material samples was performed. Finally, moulds for aluminium casting were obtained either using the stereolithographic part as a green mould, either by pyrolisis of the organic binder and subsequent sintering at high temperature.

Future investigations will be devoted to optimise the process and the mechanical performances of the sintered parts, improving the rheological properties of suspensions and reducing the building time.

This is a novel work on the production of ceramic moulds for aluminium casting using a SLA.

The siting of new waste incinerators has often stimulated vigorous opposition. U.S. research concludes that successful campaigns depend upon the discourse and tactics employed by campaigners and the skills and ingenuity of campaigners rather than the static characteristics of local communities. Evidence from recent anti-incinerator campaigns in England suggests otherwise. In England, community characteristics differentiate, but campaigners’ discourse matters less than political opportunities determined by the structure of local political systems, the urgency of local waste authorities’ concerns to find solutions to problems of waste disposal, the sequence of relevant planning decisions, and changes in the national policy context.

Purpose – This work aims to study the treatment of adsorbant on the increasing liquid hydrocarbon quality produced by pyrolysis low density polyethylene (LDPE) plastic waste at low temperature. The hydrocarbon distribution, physicochemical properties and emission test were also studied due to its application in internal combustion engine. This research uses pure Calcium carbonate (CaCO₃) and pure activated carbon as adsorbant, LDPE type clear plastic samples with control variable that is solar gas station.

Design/Methodology/Approach – LDPE plastic waste of 10 kg were vaporized in the thermal cracking batch reactor using LPG 12 kg as fuel at range temperature from 100 to 300°C and condensed into liquid hydrocarbon. Furthermore, this product was treated with the mixed CaCO₃ and activated carbon as adsorbants to decrease contaminant material.

Findings – GC-MS identified the presence of carbon chain in the range of C6–C44 with 24.24% of hydrocarbon compounds in the liquid. They are similar to diesel (C6–C14). The 30% of liquid yields were found at operating temperature of 300°C. The calorific value of liquid was 46.021 MJ/Kg. This value was 5.07% higher than diesel as control.

Originality/Value – Hydrocarbon compounds in liquid produced by thermal cracking at a low temperature was similar to liquid from a catalytic process.

Aeronautical & General Instruments Ltd, will exhibit their R 128 recording cameras, designed to photograph the information displayed on the cathode ray tube of an aircraft's reconnaissance radar.

The purpose of this paper is to present the results of interaction occurring during the exposition of some specific carbon textile materials obtained in laboratory conditions to beams of various laser types.

Carbon fabric materials – fiber, felt and cloth – obtained from different precursor materials and prepared at various process conditions (oxidized, partially carbonized, carbonized, graphitized), were exposed to pulses of various lasers (Nd3+: YAG, alexandrite, ruby).

Depending on the laser power, plasma and destructive phenomena occurred. In the case of an interaction between a Nd3+: YAG laser beam and specimens of thickness in millimeter range, the authors have estimated the threshold of the energy density for drilling and discussed the possible models of the interaction.

The results have implications in the estimations of quality as well as in the improvement of material processing, giving some new light to the changes of mechanical and optical constants of the material, as well as to the changes of carbon groups of the material, which would be useful for different types of modeling. Future research will be in the interaction of laser beams with various textile materials, where the investigation would cover the microstructure changes and the implications on cloth cutting and welding, concerning the damages as well as relief structures, specially renew for fs laser regimes.

The area of laser applications in the textile industry is supported by scientific and applicative exploration. However, fewer results are concerned with deep introspection into the microstructure of the damages considering the laser interaction with carbon fiber and other carbon-based textiles.