Search results
1 – 10 of 307Tian Fang and Daiyong Ye
This paper aims to prepare good waterborne light-diffusion dip-coatings (WLDDC) for the glass lampshade inner walls of LED lamp tubes, the effects of viscosities and viscous flow…
Abstract
Purpose
This paper aims to prepare good waterborne light-diffusion dip-coatings (WLDDC) for the glass lampshade inner walls of LED lamp tubes, the effects of viscosities and viscous flow activation energies on these dip-coatings were investigated.
Design/methodology/approach
The WLDDC were prepared using white pigments, light-diffusion agents, additives and an acrylic emulsion. The dip-coatings were characterized by Fourier transform infrared spectroscopy, scanning electron microscopy and a digital rotational viscometer, respectively. The effects of shear rates, temperatures and solids contents on the viscosities of the dip-coatings were studied. The viscous flow activation energies of these dip-coatings and the emulsion were calculated, compared and studied, respectively.
Findings
The results showed that the non-Newtonian behaviors of these dip-coatings were more prominent than that of the acrylic emulsion. When the temperature was maintained to be a constant and the shear rate was increased, the viscosity decreased and the shear stress increased. When the shear rate was maintained to be a constant, the viscosity decreased with increasing temperatures. The viscous flow activation energies of these dip-coatings decreased with the increasing shear rates. The higher solid contents of WLDDC were, the more its viscosity would decrease with the increasing shear rates, the more prominent its non-Newtonian behaviors would show.
Practical implications
A sample of good WLDDC with balanced properties was illustrated.
Originality/value
This investigation benefits to investigate waterborne environment-friendly dip-coatings for the inner glass walls of lamp tubes. This research provides an approach to optimize the viscosity parameters of light-diffusion dip-coatings.
Details
Keywords
Chang-E Zhou, Haidan Niu, Qing Zhang, Huixia Li, Chi Wai Kan, Chang Sun, Jinmei Du and Changhai Xu
This paper aims to prepare an associative thickener base on two polyacrylate-based copolymers, which can be used for digital printing of nylon carpet with enhanced performance.
Abstract
Purpose
This paper aims to prepare an associative thickener base on two polyacrylate-based copolymers, which can be used for digital printing of nylon carpet with enhanced performance.
Design/methodology/approach
An associative thickener was prepared by compounding two polyacrylate-based copolymers, cationic starch and polyacrylic acid; and mediated by polyethylene glycol and polyacrylamide crosslinker. The formulation of the associative thickener was optimized by using the orthogonal array testing strategy. The stability of the associative thickener was investigated by measuring effects of temperature, electrolytes, storage time and auxiliaries on viscosity. The associative thickener was compared with a commercial thickener by evaluating their performance in digital printing of nylon carpet.
Findings
The associative thickener provided same color strength and fastness in the printing of nylon carpet as the commercial one, but was more easily washed off for a better hand feeling of the printed carpet.
Practical implications
The prepared associative thickener can be applied for digital printing of nylon carpet.
Originality/value
The associative thickener can be facilely prepared from commercially available chemicals and suitable for digital printing of nylon carpet.
Details
Keywords
Abstract
Purpose
The purpose of this article is to analyze the heat and mass transfer with entropy generation during magnetohydrodynamics (MHD) flow of non-Newtonian Sisko nanofluid over a linearly stretching cylinder under the influence of velocity slip, chemical reaction and thermal radiation. The Brownian motion, thermophoresis and activation energy are assimilated in this nanofluid model. Convective boundary conditions on heat and mass transfer are considered. The physical model may have diverse applications in several areas of technology underlying thermohydrodynamics including supercritical fluid extraction, refrigeration, ink-jet printing and so on.
Design/methodology/approach
The dimensional governing equations are nondimensionalized by using appropriate similarity variables. The resulting boundary value problem is converted into initial value problem using the method of superposition and numerically computed by employing well-known fourth-order Runge–Kutta–Fehlberg approach along with shooting technique (RKF4SM). The quantitative impacts of emerging physical parameters on the velocity, temperature, concentration, skin friction coefficient, Nusselt number, Sherwood number, entropy generation rate and Bejan number are presented graphically and in tabular form, and the salient features are comprehensively discussed.
Findings
From graphical outcomes, it is concluded that the slip parameters greatly influence the flow characteristics. Fluid temperature is elevated with rising radiation parameter and thermal Biot number. Nanoparticle concentration is reported in decreasing form with activation energy parameter. Entropy is found to be an increasing function of magnetic field, Brownian motion and material parameters. The entropy is less generated for shear-thinning fluid compared to shear-thickening as well as Newtonian fluids in the system.
Originality/value
Till now no study has been documented to explore the impact of binary chemical reaction with Arrhenius activation energy on entropy generation in an MHD boundary layer flow of non-Newtonian Sisko nanofluid over a linear stretching cylinder with velocity slip and convective boundary conditions.
Details
Keywords
Salman Ahmad, Muhammad Ijaz Khan, Tasawar Hayat, Muhammad Waqas and Ahmed Alsaedi
The purpose of this paper is to study entropy generation in magneto-Jeffrey nanomaterial flow by impermeable moving boundary. Adopted nanomaterial model accounts Brownian and…
Abstract
Purpose
The purpose of this paper is to study entropy generation in magneto-Jeffrey nanomaterial flow by impermeable moving boundary. Adopted nanomaterial model accounts Brownian and thermophoretic diffusions. Modeling is arranged for thermal radiation, nonlinear convection and viscous dissipation. In addition, the concept of Arrhenius activation energy associated with chemical reaction are introduced for description of mass transportation.
Design/methodology/approach
Homotopy algorithms are used to compute the system of ordinary differential equations.
Findings
The afore-stated analysis clearly notes that simultaneous aspects of activation energy and entropy generation are not yet investigated. Therefore, the intention here is to consider such effects to formulate and investigate the magneto-Jeffrey nanoliquid flow by impermeable moving surface.
Originality/value
As per the authors’ knowledge, no such work has yet been published in the literature.
Details
Keywords
Ashish Paul, Bhagyashri Patgiri and Neelav Sarma
Flow induced by rotating disks is of great practical importance in several engineering applications such as rotating heat exchangers, turbine disks, pumps and many more. The…
Abstract
Purpose
Flow induced by rotating disks is of great practical importance in several engineering applications such as rotating heat exchangers, turbine disks, pumps and many more. The present research has been freshly displayed regarding the implementation of an engine oil-based Casson tri-hybrid nanofluid across a rotating disk in mass and heat transferal developments. The purpose of this study is to contemplate the attributes of the flowing tri-hybrid nanofluid by incorporating porosity effects and magnetization and velocity slip effects, viscous dissipation, radiating flux, temperature slip, chemical reaction and activation energy.
Design/methodology/approach
The articulated fluid flow is described by a set of partial differential equations which are converted into one set of higher-order ordinary differential equations (ODEs) by using convenient conversions. The numerical solution of this transformed set of ODEs has been spearheaded by using the effectual bvp4c scheme.
Findings
The acquired results show that the heat transmission rate for the Casson tri-hybrid nanofluid is intensified by, respectively, 9.54% and 11.93% when compared to the Casson hybrid nanofluid and Casson nanofluid. Also, the mass transmission rate for the Casson tri-hybrid nanofluid is augmented by 1.09% and 2.14%, respectively, when compared to the Casson hybrid nanofluid and Casson nanofluid.
Originality/value
The current investigation presents an educative response on how the flow profiles vary with changes in the inevitable flow parameters. As per authors’ knowledge, no such scrutinization has been carried out previously; therefore, our results are novel and unique.
Details
Keywords
Felicita Almeida, B.J. Gireesha, P. Venkatesh and G.K. Ramesh
This study aims to investigate the flow behavior of aluminum oxide–water nanofluid with variable viscosity flowing through the microchannel parallel with the ground, with low…
Abstract
Purpose
This study aims to investigate the flow behavior of aluminum oxide–water nanofluid with variable viscosity flowing through the microchannel parallel with the ground, with low aspect ratio. The study focuses on the first and second law analyses of Poiseuille flow using water as the base fluid with alumina nanoparticles suspended in it. Combined effects of thermal radiation, viscous dissipation, variable viscosity, nanoparticle shape factor and volume fraction on the thermal performance are studied and the in-built irreversibility in the process is examined.
Design/methodology/approach
The governing equations with dimensions are reduced to non-dimensional equations by using dimensionless quantities. Then, the Runge–Kutta–Fehlberg shooting scheme tackles the present non-linear equations.
Findings
The outcomes of the present analysis reveal that the activation energy parameter with its increase, depletes the exergetic effectiveness of the system, thus defending the fact to keep the activation energy parameter the lowest as possible for the system efficiency. In addition, thermal radiation and Biot number enhance the release of heat energy, thereby cooling the system. Bejan number graph exhibits the decreasing behavior for the increased nanoparticle shape factor, whereas the temperature enhances with the rise in nanoparticle shape factor.
Originality/value
The effects of nanoparticle shape factor in Poiseuille flow for alumina–water nanoliquid in low aspect ratio microchannel is inspected at the earliest. Exergetic effectiveness of the system is studied and heat transfer characteristics are explored for thermal radiation effect and activation energy parameter. Besides,
Details
Keywords
Manoj Kumar Nayak, Sachin Shaw, H. Waqas and Taseer Muhammad
The purpose of this study is to investigate the Cattaneo-Christov double diffusion, multiple slips and Darcy-Forchheimer’s effects on entropy optimized and thermally radiative flow…
Abstract
Purpose
The purpose of this study is to investigate the Cattaneo-Christov double diffusion, multiple slips and Darcy-Forchheimer’s effects on entropy optimized and thermally radiative flow, thermal and mass transport of hybrid nanoliquids past stretched cylinder subject to viscous dissipation and Arrhenius activation energy.
Design/methodology/approach
The presented flow problem consists of the flow, heat and mass transportation of hybrid nanofluids. This model is featured with Casson fluid model and Darcy-Forchheimer model. Heat and mass transportations are represented with Cattaneo-Christov double diffusion and viscous dissipation models. Multiple slip (velocity, thermal and solutal) mechanisms are adopted. Arrhenius activation energy is considered. For graphical and numerical data, the bvp4c scheme in MATLAB computational tool along with the shooting method is used.
Findings
Amplifying curvature parameter upgrades the fluid velocity while that of porosity parameter and velocity slip parameter whittles down it. Growing mixed convection parameter, curvature parameter, Forchheimer number, thermally stratified parameter intensifies fluid temperature. The rise in curvature parameter and porosity parameter enhances the solutal field distribution. Surface viscous drag gets controlled with the rising of the Casson parameter which justifies the consideration of the Casson model. Entropy generation number and Bejan number upgrades due to growth in diffusion parameter while that enfeeble with a hike in temperature difference parameter.
Originality/value
To the best of the authors’ knowledge, this research study is yet to be available in the existing literature.
Details
Keywords
Muhammad Ayub, Muhammad Yousaf Malik, Misbah Ijaz, Marei Saeed Alqarni and Ali Saeed Alqahtani
The purpose of this paper is to explore the novel aspects of activation energy in the nonlinearly convective flow of Walter-B nanofluid in view of Cattaneo–Christov…
Abstract
Purpose
The purpose of this paper is to explore the novel aspects of activation energy in the nonlinearly convective flow of Walter-B nanofluid in view of Cattaneo–Christov double-diffusion model over a permeable stretched sheet. Features of nonlinear thermal radiation, dual stratification, non-uniform heat generation/absorption, MHD and binary chemical reaction are also evaluated for present flow problem. Walter-B nanomaterial model is employed to describe the significant slip mechanism of Brownian and thermophoresis diffusions. Generalized Fourier’s and Fick’s laws are examined through Cattaneo–Christov double-diffusion model. Modified Arrhenius formula for activation energy is also implemented.
Design/methodology/approach
Several techniques are employed for solving nonlinear differential equations. The authors have used a homotopy technique (HAM) for our nonlinear problem to get convergent solutions. The homotopy analysis method (HAM) is a semi-analytical technique to solve nonlinear coupled ordinary/partial differential equations. The capability of the HAM to naturally display convergence of the series solution is unusual in analytical and semi-analytic approaches to nonlinear partial differential equations. This analytical method has the following great advantages over other techniques:
It provides a series solution without depending upon small/large physical parameters and applicable for not only weakly but also strongly nonlinear problems.
It guarantees the convergence of series solutions for nonlinear problems.
It provides us a great choice to select the base function of the required solution and the corresponding auxiliary linear operator of the homotopy.
It provides a series solution without depending upon small/large physical parameters and applicable for not only weakly but also strongly nonlinear problems.
It guarantees the convergence of series solutions for nonlinear problems.
It provides us a great choice to select the base function of the required solution and the corresponding auxiliary linear operator of the homotopy.
Brief mathematical description of HAM technique (Liao, 2012; Mabood et al., 2016) is as follows. For a general nonlinear equation:
where N denotes a nonlinear operator, x the independent variables and u(x) is an unknown function, respectively. By means of generalizing the traditional homotopy method, Liao (1992) creates the so-called zero-order deformation equation:
here q∈[0, 1] is the embedding parameter, H(x) ≠ 0 is an auxiliary function, h(≠ 0) is a nonzero parameter, L is an auxiliary linear operator, uo(x) is an initial guess of u(x) and
Expanding
If the initial guess, the auxiliary linear operator, the auxiliary h and the auxiliary function are selected properly, then the series (4) converges at q=1, then we have:
By defining a vector
where:
Applying L−1 on both sides of Equation (6), we get:
In this way, we obtain um for m ⩾ 1, at mth-order, we have:
Findings
It is evident from obtained results that the nanoparticle concentration field is directly proportional to the chemical reaction with activation energy. Additionally, both temperature and concentration distributions are declining functions of thermal and solutal stratification parameters (P1) and (P2), respectively. Moreover, temperature Θ(Ω1) enhances for greater values of Brownian motion parameter (Nb), non-uniform heat source/sink parameter (B1) and thermophoresis factor (Nt). Reverse behavior of concentration ϒ(Ω1) field is remarked in view of (Nb) and (Nt). Graphs and tables are also constructed to analyze the effect of different flow parameters on skin friction coefficient, local Nusselt number, Sherwood numbers, velocity, temperature and concentration fields.
Originality/value
The novelty of the present problem is to inspect the Arrhenius activation energy phenomena for viscoelastic Walter-B nanofluid model with additional features of nonlinear thermal radiation, non-uniform heat generation/absorption, nonlinear mixed convection, thermal and solutal stratification. The novel aspect of binary chemical reaction is analyzed to characterize the impact of activation energy in the presence of Cattaneo–Christov double-diffusion model. The mathematical model of Buongiorno is employed to incorporate Brownian motion and thermophoresis effects due to nanoparticles.
Details
Keywords
Abstract
This paper presents a boundary element method (BEM) based on a subdomain approach for the solution of non‐Newtonian fluid flow problems which include thermal effects and viscous dissipation. The volume integral arising from non‐linear terms is converted into equivalent boundary integrals by the multi‐domain dual reciprocity method (MD‐DRM) in each subdomain. Augmented thin plate splines interpolation functions are used for the approximation of field variables. The iterative numerical formulation is achieved by viewing the material as divided into small elements and on each of them the integral representation formulae for the velocity and temperature are applied and discretised using linear boundary elements. The final system of non‐linear algebraic equations is solved by a modified Newton's method. The numerical examples include non‐Newtonian problems with viscous dissipation, temperature‐dependent viscosity and natural convection due to bouyancy forces.
Details
Keywords
Aurang Zaib, Mohammad Mehdi Rashidi, Ali J. Chamkha and Krishnendu Bhattacharyya
This paper aims to peruse the influence of second law analysis for electrically conducting fluid of a Casson nanofluid over a wedge. For activation energy, a modified Arrhenius…
Abstract
Purpose
This paper aims to peruse the influence of second law analysis for electrically conducting fluid of a Casson nanofluid over a wedge. For activation energy, a modified Arrhenius function is used.
Design/methodology/approach
The highly non-linear governing equations are developed using similarity transformations and then computed numerically via Keller–Box method.
Findings
The influences of emerging parameters on velocity, temperature distribution and concentration of nanoparticle are explained and presented via graphs and tables. Also, the behavior of fluid flow is investigated through the coefficient of skin friction, Nusselt and Sherwood numbers. Results reveal that the velocity profile enhances due to increasing Casson parameter and magnetic parameter, whereas the temperature distribution and concentration of nanoparticle decrease with larger vales of Casson parameter. It is inspected that the concentration boundary layer increases due to activation energy and decreases due to reaction rate and temperature differences.
Originality/value
The authors believe that all the numerical results are original and significant which are used in biomedicine, industrial, electronics and transportation. The results have not been considered elsewhere.
Details