Search results

UV curing technology has a number of unique advantages over the conventional curing technologies. However, until very recently, there had been few successful examples of the application of UV curing technology in ink‐jet printing. Several reasons, including the requirement of low viscosity for ink‐jet printing inks, were responsible for the lack of development of UV curable ink‐jet printing inks. This paper describes, in some details, the challenges that a formulator had to face in developing UV curable ink‐jet printing inks, together with information on the status quo of UV curable ink‐jet printing technology.

This paper aims to highlight the importance of braille for visually impaired people and the possibility of printing it by using the ultra-violet (UV) inkjet printing technique.

The vision impairment, definitions and statistics, as well as braille letter and standards, are first reviewed. Then, the methods of printing braille have been discussed, with a focus on UV ink-jet printing. Finally, this study indicates a significant role of UV ink-jet printed Braille, its possibilities and its advantages.

Research studies in the field of UV ink-jet printed braille are showing that it is possible to print good legible braille of the adequate height of dots. This paper highlights some advantages of printing braille with UV ink-jet, like the possibility of achieving greater dot height than embossing and no need for printing form. Printing of additional elements on top of braille dot has also been tested, and possible use for differentiation of the written notation is shown. This paper also indicates the importance of technological and operating conditions in UV inkjet braille printing. It predicts a significant role of UV inkjet in braille printing.

This paper provides a detailed review of UV ink-jet printed braille: possibilities, advantages and application.

The purpose of this paper is provide a broad view for the standardization efforts of color quality evaluation of color 3D printing techniques. Further, this review paper demonstrates the processes and color properties of most color 3D printing techniques with specific devices and applications to extend the range of possible memberships of standardization group.

Six color 3D printing techniques including plastic-based, paper-based, powder-based, organism-based, food-based and metal-based color 3D printing have been introduced and illustrated with colorization principles and forming features in detail. Moreover, for printed 3D color objects, literature about color measurement, color specification and color reproduction are described and analyzed, respectively.

Four color 3D printing techniques including plastic-based, paper-based, powder-based and food-based color 3D printing show great affinity toward standardization of color quality evaluation, while their colorization principles indicate that it is difficult with a single standard frame. It is possible to develop a completed color quality evaluation standard for color 3D printing based on approaches in color 2D printing when color measurement method and devices are standardized together.

The paper provides an important guide focusing on the efforts to standardize the colorization processes and color quality evaluation of the color 3D printing techniques.

This paper aims to present a method of color three-dimensional (3D) printing based on color adherence.

First, experiments of the color effects of 3D printings using different carriers and different printing methods were performed. Second, the color of a specific point could be calculated through a theory of dimension-reducing, and the color distribution of 3D model was transformed from 3D to 1D color line corresponding with 3D print sequence. At last, the color lines, which were printed on a PE film by silk-screen printing, was carried by a filament and then printed through a fused deposition modeling 3D printer.

The printing ink and PE film are suitable as the pigment and carrier under this investigation, respectively. Based on an idea of reducing dimension, the method of 3D color printing through adhering color to a filament is realized. The color saturation of the sample was relatively high through the method.

It is hard to avoid that there may be some residual color in the nozzle through this method, and the purity of following color will be affected. As a result, continuous improvements should be made to perfect the method.

An approach of 3D color printing is described in detail, and what kind of model is more applicable is discussed particularly.

This approach is implemented to print color 3D objects with just one nozzle by means of color adherence. That is, printing the 3D objects using the filament is carried out with 1D color line, which is printed by a traditional printing method.

The PCB industry is quickly gearing up for the digital printing age. While photo imaging and screen‐printing have been commonly used as recognized and established techniques in the PCB industry, their high tooling costs and time‐consuming procedures are willingly exchanged by digital printing, following the establishment of this technology both in everyday office uses and in a variety of industrial applications. In the PCB industry, a number of companies have recently begun to offer various digital printing system configurations. This paper discusses the basic requirements of PCB ink‐jet printing systems. Possible solutions and basic system engineering considerations are presented, to show the optimal system configuration.

The purpose of this paper is to encapsulate aqueous dispersions of nano‐scale CI Pigment Red 122 prepared through ball milling into UV‐curable resins, 1,6 hexanediol diacrylate (HDDA, monomer), and polyester acrylate (oligomer) using the mini‐emulsion technique.

The encapsulation of pigment is achieved by mixing a surfactant‐stabilised pigment dispersions and a monomer/oligomer mini‐emulsions and subjecting both to mini‐emulsification conditions. A film of encapsulated pigment mini‐emulsion is finally UV cured using water‐soluble initiator. Efficient encapsulation is proven by ultra‐centrifugal sedimentation, scanning electron microscopy and thermogravimetric analysis (TGA). The stability of pigment dispersions and also the encapsulation process are investigated.

TGA and ultracentrifuge sedimentation results showed that CI Pigment Red 122 is successfully encapsulated into polyester acrylate/HDDA resins. The oligomer (polyester acrylate) in the presence of organic pigment could stabilise the mini‐emulsion droplets without introducing any other hydrophobes (co‐stabiliser) in the formulation. In addition, the encapsulation percentage and suspension stability of mini‐emulsion are best when the polyester acrylate/HDDA weight ratio is 3:2.

The UV‐curable resins used in the present context are 1,6 HDDA and polyester acrylate. Besides, various oligomer/monomer composition types could be used and its impact on encapsulation efficiency could be also studied.

This method of encapsulation is practically effective for modification of organic pigments for use in UV‐curable ink‐jet printing inks.

The developed method is novel from a literature point of view and can be of a great benefit to achieve the required properties of pigmented UV‐curable system in inkjet printing of textiles. In addition, it could find numerous applications in surface coating.

The industry standard for applying the identification nomenclature to Printed Circuit Boards (PCBs) is silkscreen legend printing, using white ink. This multi‐step process has minimal flexibility for applying unique legends e.g. serialization numbers to individual boards. This paper describes a new, alternative single step direct legend printing system which uses piezoelectric inkjet technology, the leading digital imaging method for a variety of industrial applications. The advantages that this, inherently clean and efficient, drop‐on‐demand, printing process brings to legend printing include increased flexibility, shorter process times, good legend definition, accurate placement, small footprint equipment and reduced labour and material usage.

Examines the ninth published year of the ITCRR. Runs the whole gamut of textile innovation, research and testing, some of which investigates hitherto untouched aspects. Subjects discussed include cotton fabric processing, asbestos substitutes, textile adjuncts to cardiovascular surgery, wet textile processes, hand evaluation, nanotechnology, thermoplastic composites, robotic ironing, protective clothing (agricultural and industrial), ecological aspects of fibre properties – to name but a few! There would appear to be no limit to the future potential for textile applications.