Search results
1 – 10 of 838Nelson F.F. Ebecken, Edison C.P. de Lima, Luiz Landau, Lauro H.M. Chueiri and Adilson C. Benjamin
The applicability of a non‐linear finite element method for the determination of the static strength of tubular joints is examined. In order to establish static strength…
Abstract
The applicability of a non‐linear finite element method for the determination of the static strength of tubular joints is examined. In order to establish static strength, non‐linear elasto‐plastic models are implemented. Techniques for automatically generating finite element meshes in stress analysis of tubular intersections are used. The analysis is carried out on a typical X‐joint under axial brace loads and the model represents only one‐eighth of the joint. The results are obtained by two different element procedures: three node flat shell element (Ilyushin yield criterion); eight node isoparametric shell element (von Mises yield criterion). The objective of this work is to discuss the modelling and computational aspects which are required for dealing with this elasto‐plastic analysis and to determine the necessary degree of refinement in order to obtain reliably the loads at which ultimate failure occurs.
WHEN metal parts are exposed to alterations of temperature, their outer dimensions undergo a change. With rising temperatures metals expand, with falling temperatures they…
Abstract
WHEN metal parts are exposed to alterations of temperature, their outer dimensions undergo a change. With rising temperatures metals expand, with falling temperatures they contract. If different temperatures exist within one and the same metal member, internal stresses begin to act, causing a deformation of the component and thus setting up internal strains. Cracks, buckling, distortion and shrinkage are the external results of such strains.
This paper gives a review of the finite element techniques (FE) applied in the analysis and design of machine elements; bolts and screws, belts and chains, springs and dampers…
Abstract
This paper gives a review of the finite element techniques (FE) applied in the analysis and design of machine elements; bolts and screws, belts and chains, springs and dampers, brakes, gears, bearings, gaskets and seals are handled. The range of applications of finite elements on these subjects is extremely wide and cannot be presented in a single paper; therefore the aim of this paper is to give FE researchers/users only an encyclopaedic view of the different possibilities that exist today in the various fields mentioned above. An Appendix included at the end of the paper presents a bibliography on finite element applications in the analysis/design of machine elements for 1977‐1997.
Details
Keywords
Shengfu Xue, Zhengping He, Bingzhi Chen and Jianxin Xu
This study investigates the fitting techniques for notch fatigue curves, seeking a more reliable method to predict the lifespan of welded structures.
Abstract
Purpose
This study investigates the fitting techniques for notch fatigue curves, seeking a more reliable method to predict the lifespan of welded structures.
Design/methodology/approach
Building on the fatigue test results of butt and cruciform joints, this research delves into the selection of fitting methods for the notch fatigue curve of welded joints. Both empirical formula and finite element methods (FEMs) were employed to assess the notch stress concentration factor at the toe and root of the two types of welded joints. Considering the mean stress correction and weld misalignment coefficients, the notch fatigue life curves were established using both direct and indirect methods.
Findings
An engineering example was employed to discern the differences between the direct and indirect approaches. The findings highlight the enhanced reliability of the indirect method for fitting the fatigue life curve.
Originality/value
While the notch stress approach is extensively adopted due to its accurate prediction of component fatigue life, most scholars have overlooked the importance of its curve fitting methods. Existing literature scantily addresses the establishment of these curves. This paper offers a focused examination of fatigue curve fitting techniques, delivering valuable perspectives on method selection.
Details
Keywords
WILLIAM F. COFER and KENNETH M. WILL
Offshore structures are generally constructed as frameworks of tubular members. The tubular joints should be designed to allow the full post yield or post buckled capacity of the…
Abstract
Offshore structures are generally constructed as frameworks of tubular members. The tubular joints should be designed to allow the full post yield or post buckled capacity of the members. However, design guidelines for ultimate strength capacity of these joints are based exclusively upon compilations of test data for simple configurations under simple loading conditions. A methodology based upon the finite element method is presented for analytically predicting the ultimate strength of arbitrary tubular joints. Eight node, isoparametric, curved shell elements were used for the majority of the tubular joint model. Twenty node, isoparametric, solid elements were used to capture the three‐dimensional stress state at the shell intersection while fifteen node, isoparametric, wedge elements modelled the weld profile. Solid‐shell transition elements provided the connection between the three‐dimensional solid elements and the surface based shell elements. Non‐linearities were included via an elastoplastic material model with isotropic strain hardening and the updated Lagrangian approach for finite deflections and rotations. Several experimental tubular joint analyses were reproduced to validate the analytical procedure. Non‐linear finite element analysis was shown to be a practical approach for the evaluation and extension of current design procedures for tubular joints.
Details
Keywords
A. Fouathia, A. Mekroud and K. Bellagh
Fatigue failure caused by stress concentrations in tubular welded joints is observed in off shore platforms subjected to cyclic loading in corrosive marine environments. In some…
Abstract
Fatigue failure caused by stress concentrations in tubular welded joints is observed in off shore platforms subjected to cyclic loading in corrosive marine environments. In some junctions, the stress concentration can induce a stress thirty times the nominal stress, and increase the risk of fatigue failure in tubular joints. Therefore, it is necessary to accurately assess the intensity of the stress concentrations to effectively deal with the problem of fatigue damage and lead to reliable tubular joints. This work aims to study the stress distribution and location of the "hot" spots in a Twelded tubular structure subjected to a combined loading of tension and bending (in-plane bending, out of plane bending and traction) to better simulate the actual loading.
Details
Keywords
Shufeng Li, Di Zhao and Yating Zhou
Concrete-filled steel tube structures are widely used for their high bearing capacity, good plasticity, good fire resistance and optimal seismic performance. In order to give full…
Abstract
Purpose
Concrete-filled steel tube structures are widely used for their high bearing capacity, good plasticity, good fire resistance and optimal seismic performance. In order to give full play to the advantages of concrete-filled steel tube, this paper proposes a prefabricated concrete-filled steel tube frame joint.
Design/methodology/approach
The concrete-filled steel tube column and beam are connected by high-strength bolted end-plate, and the steel bars in the concrete beam are welded vertically with the end-plates through the enlarged pier head. In addition, the finite element software ABAQUS is used numerically to study the seismic performance of the structure.
Findings
The ductility coefficient of the joint is in 1.72–6.82, and greater than 2.26 as a whole. The equivalent viscous damping coefficient of the joint is 0.13–3.03, indicating that the structure has good energy dissipation capacity.
Originality/value
The structure is convenient for construction and overcomes the shortcomings of the previous on-site welding and on-site concrete pouring. The high-strength bolted end-plate connection can effectively transfer the load, and each component can give play to its material characteristics.
Details
Keywords
Slobodanka Jovasevic, José Correia, Marko Pavlovic, Rita Dantas, Carlos Rebelo, Milan Veljkovic and Abilio M.P. de Jesus
In the last decades, the demand and use of renewable energies have been increasing. The increase in renewable energies, particularly wind energy, leads to the development and…
Abstract
Purpose
In the last decades, the demand and use of renewable energies have been increasing. The increase in renewable energies, particularly wind energy, leads to the development and innovation of powerful wind energy converters as well as increased production requirements. Hence, a higher supporting structure is required to achieve higher wind speed with less turbulence. To date, the onshore wind towers with tubular connections are the most used. The maximum diameter of this type of tower is limited by transportation logistics. The purpose of this paper is to propose an alternative wind turbine lattice structure based on half-pipe steel connections.
Design/methodology/approach
In this study, a new concept of steel hybrid tower has been proposed. The focus of this work is the development of a lattice structure. Therefore, the geometry of the lattice part of the tower is assessed to decrease the number of joints and bolts. The sections used in the lattice structure are constructed in a polygonal shape. The elements are obtained by cold forming and bolted along the length. The members are connected by gusset plates and preloaded bolts. A numerical investigation of joints is carried out using the finite element (FE) software ABAQUS.
Findings
Based on the proposed study, the six “legs” solution with K braces under 45° angle and height/spread ratio of 4/1 and 5/1 provides the most suitable balance between the weight of the supporting structure, number of bolts in joints and reaction forces in the foundations, when compared with four “legs” solution.
Originality/value
In this investigation, the failure modes of elements and joints of an alternative wind turbine lattice structures, as well as the rotation stiffness of the joints, are determined. The FE results show good agreement with the analytical calculation proposed by EC3-1-8 standard.
Details
Keywords
Jing-feng Wang, Hai-Tao Wang, Wei-Wei Shi and Hong-Yu Sheng
This paper aims to obtain fire resistance of semi-rigid joints for concrete-filled steel tubular (CFST) composite frames and temperature filed distribution of composite joints in…
Abstract
Purpose
This paper aims to obtain fire resistance of semi-rigid joints for concrete-filled steel tubular (CFST) composite frames and temperature filed distribution of composite joints in fire.
Design/methodology/approach
The temperature filed model of semi-rigid joints to CFST columns with slabs was made by using ABAQUS finite element (FE) software, in considering temperature heating-up stage of fire modelling. The effects of composite slab, fire type and construction location were discussed, and the model was verified by the test results. The temperature distribution of composite joint under three-side or four-side fire condition was studied by the sequentially coupled thermal analysis method. The temperature versus time curves and temperature distribution of various construction and location were analyzed.
Findings
The paper provides FE analysis and numerical simulation on temperature field of semi-rigid joints for CFST composite frames in fire. The effects of composite slab, fire type and construction location were discussed, and the model was verified by the test results. It suggests that the temperature distribution of composite joint in three- or four-side fire condition showed a different development trend.
Research limitations/implications
Because of the chosen FE analysis approach, the research results may lack generalizability. Therefore, researchers are encouraged to test the proposed propositions further.
Practical implications
The research results will become the scientific foundation of mechanical behavior and design method of semi-rigid CFST composite frames in fire.
Originality/value
This paper fulfils an identified need to study the temperature field distribution of the semi-rigid joints to CFST columns and investigate the mechanical behavior of the semi-rigid CFST joints in fire.
Details
Keywords
ZHI‐HUA ZHONG and JAROSLAV MACKERLE
Contact problems are among the most difficult ones in mechanics. Due to its practical importance, the problem has been receiving extensive research work over the years. The finite…
Abstract
Contact problems are among the most difficult ones in mechanics. Due to its practical importance, the problem has been receiving extensive research work over the years. The finite element method has been widely used to solve contact problems with various grades of complexity. Great progress has been made on both theoretical studies and engineering applications. This paper reviews some of the main developments in contact theories and finite element solution techniques for static contact problems. Classical and variational formulations of the problem are first given and then finite element solution techniques are reviewed. Available constraint methods, friction laws and contact searching algorithms are also briefly described. At the end of the paper, a bibliography is included, listing about seven hundred papers which are related to static contact problems and have been published in various journals and conference proceedings from 1976.
Details