Search results

The purpose of this paper is to investigate the static and dynamic inelastic response of rigid and semi-rigid connections of steel structures with concrete-filled steel tube (CFST) columns built in high seismic areas, and to compare it with those with open section columns.

CFST columns are frequently used in moment resistant steel frames located in seismic areas due to their inherent advantages, including their ductility, energy absorption capacity as well as their high bearing capacity. The smart combination of steel and concrete makes it possible to benefit from the advantages of both components to the maximum. This research work presents the nonlinear dynamic response of moment resistant steel frames with CFST columns, with rigid or semi-rigid connections, built in high seismic areas, according to the Algerian seismic code RPA 99/2003, European EC8 and American FEMA 356 to show the nonlinear characteristics of this type of structures, and their advantages over steel frames with open section columns.

The paper presents the advantages of using CFST columns with rigid and semi-rigid connections on the seismic response of portal steel frames. A high performance level in terms of ductility, plastic hinges distribution and their order of appearance has been obtained. It also shows the low effect of seismic loading on the structural elements with CFST columns compared to structures with open section columns.

The investigation of the numerical results has shown the possibility of their use in the seismic areas for their adequate performance, and also with respect to the design limits specified in the seismic guidelines. In addition, this study represents a first step to develop seismic performance factors for steel structures with CFST columns in Algeria, where the Algerian code do not include a comprehensive specification for the composite steel structures.

The purpose of this paper is to detect damages in steel structures with actual connections, i.e. semi-rigid connections. The method will detect the damages by tracking the changes in the stiffness of structural members using only a limited number of dynamic responses and without knowing the type or time history of the dynamic force applied on the structure.

The paper proposes a technique that combines the iterative least-square and unscented Kalman filter (UKF) methods to identify the stiffness of beams and columns in typical two-dimensional steel-framed structures with semi-rigid connections. The detection of damages is by using nonlinear time-domain structural health monitoring method.

The technique is verified by using numerical examples using noise-free and noise-included dynamic responses from two different types of dynamic forces: harmonic and blast loads. The results showed that the UKF method with iterative least-square is a powerful approach to identify and detect damages in structures that have nonlinear behavior and the method was able to detect the damages in beams with a very high accuracy for noise-free and noise-included dynamic responses. In addition, the optimum number and locations of dynamic responses (accelerometer sensors) required for damage detection were determined.

This paper fulfills an identified need to detect damages in steel structures using only a limited number of accelerometer sensors.

It is well known that the real behaviour of joints lies between the ideal pinned or rigid joint responses. Additionally the influence of this behaviour on the global structural response has been widely studied in the past centred on the plastic resistance or the critical load. On the other hand, there are relatively few studies focusing on the dynamical response of these structures. This paper aims to discuss these issues.

Two types of structures with rigid and semi-rigid joints were considered. Their inelastic response was evaluated using the N2 conventional pushover method, and were later compared to the results from a full non-linear dynamic analysis.

The results indicated that increasing joint flexibility makes the structure less rigid, lengthening its fundamental period and enhancing its horizontal displacement. Furthermore, a parametric study showed that joint flexibility might be of paramount importance to low to medium rise buildings response.

The evaluation of the influence of joint flexibility on the inelastic behaviour of steel structures located in seismic zone is of paramount importance, and is tackled in this paper.

This paper aims to obtain fire resistance of semi-rigid joints for concrete-filled steel tubular (CFST) composite frames and temperature filed distribution of composite joints in fire.

The temperature filed model of semi-rigid joints to CFST columns with slabs was made by using ABAQUS finite element (FE) software, in considering temperature heating-up stage of fire modelling. The effects of composite slab, fire type and construction location were discussed, and the model was verified by the test results. The temperature distribution of composite joint under three-side or four-side fire condition was studied by the sequentially coupled thermal analysis method. The temperature versus time curves and temperature distribution of various construction and location were analyzed.

The paper provides FE analysis and numerical simulation on temperature field of semi-rigid joints for CFST composite frames in fire. The effects of composite slab, fire type and construction location were discussed, and the model was verified by the test results. It suggests that the temperature distribution of composite joint in three- or four-side fire condition showed a different development trend.

Because of the chosen FE analysis approach, the research results may lack generalizability. Therefore, researchers are encouraged to test the proposed propositions further.

The research results will become the scientific foundation of mechanical behavior and design method of semi-rigid CFST composite frames in fire.

This paper fulfils an identified need to study the temperature field distribution of the semi-rigid joints to CFST columns and investigate the mechanical behavior of the semi-rigid CFST joints in fire.

This paper aims to predicting the behavior of welded angle connections (moment-rotation-temperature) in fire using artificial neural network 10.

An artificial neural networking model is described to predict the moment-rotation response of semi-rigid beam-to-column joints at elevated temperature.

Data from 47 experimental fire tests and verified finite element model are used for training and testing and validating the neural network models. The model’s predicted values are compared with actual test results. The results indicate that the models can predict the moment-rotation-temperature behavior of semi-rigid beam-to-column joints with very high accuracy. The developed model can be modified easily to investigate other parameters that influence the performance of joints in fire.

The results indicate that the models can predict the moment-rotation-temperature behavior of semi-rigid beam-to-column joints with very high accuracy. The developed model can be modified easily to investigate other parameters that influence the performance of joints in fire.

In fire condition, the time to failure of a timber connection is mainly reliant on the wood charring rate, the strength of the residual wood section, and the limiting temperature of the steel connectors involved in the connection. The purpose of this study is to experimentally investigate the effects of loaded bolt end distance, number of bolt rows, and the existence of perpendicular-to-wood grain reinforcement on the structural fire behavior of semi-rigid glued-laminated timber (glulam) beam-to-column connections that used steel bolts and concealed steel plate connectors.

In total, 16 beam-to-column connections, which were fabricated in wood-steel-wood bolted connection configurations, in eight large-scale sub-frame test assemblies were exposed to elevated temperatures that followed CAN/ULC-S101 standard time-temperature curve, while being subjected to monotonic loading. The beam-to-column connections of four of the eight test assemblies were reinforced perpendicular to the wood grain using self-tapping screws (STS). Fire tests were terminated upon achieving the failure criterion, which predominantly was dependent on the connection’s maximum allowed rotation.

Experimental results revealed that increasing the number of bolt rows from two to three, each of two bolts, increased the connection’s time to failure by a greater time increment than that achieved by increasing the bolt end distance from four- to five-times the bolt diameter. Also, the use of STS reinforcement increased the connection’s time to failure by greater time increments than those achieved by increasing the number of bolt rows or the bolt end distance.

The invaluable experimental data obtained from this study can be effectively used to provide insight and better understanding on how mass-timber glulam bolted connections can behave in fire condition. This can also help in further improving the existing design guidelines for mass-timber structures. Currently, beam-to-column wood connections are designed mainly as axially loaded connections with no guidelines available for determining the fire resistance of timber connections exerting any degree of moment-resisting capability.

In seismic-prone areas, post-event operability is an important issue for steel warehouses. Even if surviving earthquakes with minimal probability of collapse, these structures might suffer so much damage, that their repair costs would be prohibitive. Strategies for limiting the building's damaged zones to specific parts (or “fuses”) can reduce repair costs. However, the replaceable part is limited to a small portion of the structure, whereas the rest cannot be disassembled. This is an issue for structures whose life span depends more likely on economics rather than on structural performances. Therefore, making them easily disassembled would be an advantage not only in seismic areas but also in any industrialized area. The purpose of this paper is to explore the “Design for Disassembly” (DfD) approach to complement seismic design and find a compromise between them.

In this work, one single type of structures was analysed (the moment-resisting frame), focusing on the design of a “disassemblable” seismic-resistant steel connection. The design process involved several iterations until an “optimum” compromise between seismic design and DfD was met.

This study shows that a compromise between seismic design and DfD is possible. In this case, the compromise was achieved at the expenses of more complex design calculations and a greater number of components than standard connections. However, this would be compensated for by a higher residual value for the entire structure.

Eventually, it was proved that a metric for assessing DfD steel connections is possible, but structural analyses are needed to validate it.

This paper aims to present a numerical investigation on the fire performance of a single plate shear connection in a steel-framed composite floor. Large-scale fire experiments show that the tensile membrane action of the concrete slab enhances the fire performance of composite floors. The enhancement in the performance is contributed to large slab deflections. However, these deflections cause significant rotations and tensile force in the single plate connection.

A finite element model is constructed, which consists of a secondary steel beam, concrete slab and shear connection components. The interaction between the connection components such as bolts and single plate is defined by contact surfaces. The analysis is conducted in two uncoupled phases: thermal analysis by creating fire boundaries on the composite floor model with convective and radiative heat transfer, and mechanical analysis by considering thermal expansion and changes in the material stiffness and strength due to temperature.

The thermo-mechanical analysis of the composite floor finite element model shows that the structure survives the 2-h Standard fire, but the connection fails by bolt shear and buckling of the connection plate.

This paper investigates the fire performance of a shear connection in a steel-framed concrete slab. Previous work generally focused on the concrete slab behavior only. The originality of the research is that the connection is considered as part of a sub-assembly and is subjected to forces due to concrete and steel beam interaction.

Since the use of advanced finite element analysis (FEA) in the design of steel structures has been increasing its popularity in order to avoid unsafe or highly conservative designs, a solid know-how in computer-aided design (CAD) and engineering (CAE) codes is necessary. Therefore the purpose of this paper is to provide an extensive review of useful guidelines concerning modelling, simulation and result validation for the accurate performance of those analyses.

Such guidelines are obtained from international steel design codes like Eurocode 3 and DNV, publications from experienced CAE engineers and renowned FE software companies like Ansys and Altair. Topics like mesh independence, the effect of the load sequence on the load bearing capacity and steel fracture criteria are underlined.

Since the use of advanced FEA in the design of steel structures is becoming more and more traditional due to the increase of its competitiveness when compared to the use of (very) conservative design rules, a solid know-how in CAD and CAE codes is necessary.

This work will be quite useful for structural steel stress engineers, contributing for a safer use of FEA in research and design.

This work will be quite useful for structural steel stress engineers, contributing for a safer use of FEA in research and design.

The purpose of this study is to develop an analytical model that is capable of predicting the behavior of shear endplate beam-column assemblies when exposed to fire, taking into account the thermal creep effect.

An analytical model is developed and validated against finite element (FE) models previously validated against experimental tests in the literature. Major material and geometrical parameters are incorporated in the analysis to investigate their influence on the overall response of the shear endplate assembly in fire events.

The analytical model can predict the induced axial forces and deflections of the assembly. The results show that when creep effect is considered explicitly in the analysis, the beam undergoes excessive deformation. This deformation needs to be taken into account in the design. The results show the significance of thermal creep effect on the behavior of the shear endplate assembly as exposed to various fire scenarios.

However, the user-defined constants of the creep equations cannot be applied to other connection types. These constants are limited to shear endplate connections having the material and geometrical parameters specified in this study.

The importance of the analytical model is that it provides a time-effective, simple and comprehensive technique that can be used as an alternative to the experimental tests and numerical methods. Also, it can be used to develop a design procedure that accounts for the transient thermal creep behavior of steel connections in real fire.