Search results

The purpose of this paper is to establish physical-chemical patterns and process parameters for obtaining low-temperature pink pigments with the structure of tin sphene using granulated blast-furnace slag.

Thermodynamic calculations were made in the work to assess the probability of malayaite phase formation during firing of slag-containing pigments. Mineralogical composition of synthesized pigments was evaluated by X-ray phase analysis. Spectral characteristics of pigments absorption in the infrared region were determined with the use of Fourier IR-spectrometry. Colour characteristics of the developed pigments and glass coatings with their introduction were studied on the comparator colour. Density of ceramic pigments was determined by pycnometric method, and chemical resistance was found on their weight loss after boiling in 1 N hydrochloric acid solution and 1 N sodium hydroxide solution.

Peculiar features of formation of the mineralogical composition of pink pigments are studied in the system CaO-MgO-Al₂O₃-SiO₂-SnO₂-Cr₂O₃ with the use of granulated blast-furnace slag. The end product and carrier of the pink colour is the solid solution on the basis of tin sphene. It is established that the most rational concentration of chromium (III) oxide for the formation of pink colouring of the pigments is 2 Wt.%.

The usage of developed pigments provides obtaining high-quality pink-coloured glaze coatings, in particular for ceramic tiles.

Activity of the components of blast-furnace slag in combination with the effective mineralizing action of B₂O₃ additive allows performing the firing of pink of the pigments with the formation of tin sphene at reduced temperature of 1,200°C.

This study aims to the effect of NaF, Li₂CO₃ and H₃BO₃ minerals was investigated, and the best mineralizer was found to be H₃BO₃. Furthermore, the effect of temperature was investigated, and the synthesized samples were calcined at temperatures of 1100, 1200 and 1300 °C to select the optimum calcination temperature.

This study was aimed at thoroughly investigating the effects of mineralizer addition and temperature on the synthesis of malayaite pink pigment based on raw materials of SnCl₂-SiO₂-Ca(OH)₂-K₂Cr₂O₇. To this end, the optimization of the synthesis parameters such as mineralizer addition and temperature was completely perused.

The optimum temperature was 1300 °C, and the color efficiency of pigments was evaluated by colorimetric (CIE L*a*b* system) analysis, and these parameters were close to those of industrial pigments.

To the best of the authors’ knowledge, for the first time, the effect of mineralizer addition and temperature on the synthesis of malayaite pink pigment was investigated through the sol-gel method. Herein, different parameters were optimized to propose a novel pigment with a much better performance.

The purpose of this study was to the low-temperature synthesis of cobalt-containing diopside pigments based on granulated blast furnace slag and to study the characteristics of the mineral formation processes, changes in the structure and colour indices.

Synthesis of cobalt-containing diopside pigments based was carried out by the directional formation of the mineralogical composition with the introduction of part of the components using granulated blast-furnace slag.

It has been established that the formation of the diopside phase in pigments containing blast-furnace slag as the main component proceeds at low temperatures (1,100°C–1,150 °C). The colour of diopside pigments is formed because of the isomorphic substitution of Si4+ ions for Al3+ ions and Mg2+ ions for Co2+ ions. It is expedient to add CoO in an amount of 0.9 mol (18 Wt.%) into the composition of diopside pigments based on blast-furnace slag to obtain defect-free violet glazes.

The developed diopside pigments enable obtaining of high-quality violet glazes for ceramics. The application of the obtained results can significantly reduce the consumption of traditional raw materials in the composition of silicate ceramic pigments, as well as reduce their firing temperature.

Calcium, magnesium and silicon oxides are the main components of blast-furnace slag. In addition, granulated blast furnace slag is mainly represented by the glassy phase, which determines its high activity during the firing process. These factors are prerequisites for using the blast-furnace slag as a valuable substitute for chemically pure or natural raw materials in silicate pigments and reducing their firing temperature.

The purpose of this study is to prepare a state-of-the-art review on advanced ceramic materials including their fabrication techniques, characteristics, applications and wettability.

This review paper presents the various types of advanced ceramic materials according to their compounding elements, fabrication techniques of advanced ceramic powders as well as their consolidation, their characteristics, applications and wetting properties. Hydrophobic/hydrophilic properties of advanced ceramic materials are described in the paper with their state-of-the-art application areas. Optical properties of fine ceramics with their intrinsic characteristics are also presented within. Special focus is given to the brief description of application-based manipulation of wetting properties of advanced ceramics in the paper.

The study of wetting/hydrophobicity/hydrophilicity of ceramic materials is important by which it can be further modified to achieve the required applications. It also makes some sense that the material should be tested for its wetting properties when it is going to be used in some important applications like biomedical and dental. Also, these advanced ceramics are now often used in the fabrication of filters and membranes to purify liquid/water so the study of wetting characteristics of these materials becomes essential. The optical properties of advanced ceramics are equally making them suitable for many state-of-the-art applications. Dental, medical, imaging and electronics are the few sectors that use advanced ceramics for their optical properties.

This review paper includes various advanced ceramic materials according to their compounding elements, different fabrication techniques of powders and their consolidation, their characteristics, various application area and hydrophobic/hydrophilic properties.

This paper aims to study the effect of different rare earth oxide on the tribological properties of polyimide (PI) nanocomposites based on the CNT and GO reinforcements.

The PI nanocomposites filled with different rare earth oxide based on the carbon nanotubes and graphene oxide were designed and prepared by hot press sintering. The mechanical and tribological properties of PI nanocomposites were carried out, and their reinforcement mechanisms were discovered.

Rare earth oxide had a weak influence on the impact strength of PI nanocomposites. Filling La₂O₃ can dramatically reduce the friction coefficient and wear rate of PI nanocomposites.

The PI nanocomposites filled with rare earth oxide based on the CNT and GO reinforcements were designed, and their mechanical and tribological properties were studied.