Search results

Piperidine side chain-functionalized N, N′-bissalicylidene phenylene di amine di-anion (salphen) consisting of salphen-Zn and salphen-Cu are able to intercalate with nucleic base stacking of DNA and can be applied as an optical DNA hybridization detector. Attaching DNA and salphen to glass surfaces has been done via coating the surface with the silane coupling agents containing 3-aminopropyltriethoxysilane that was synthesized for acting as a high-affinity RNA carrier matrix. The Schiff base salphen-zinc (II) and salphen-Cu (II) complexes-labelled probe to target nucleic acid renders a colour change of the DNA biosensor to a green and red background colour for zinc and copper, respectively. This study aims to indicate that the DNA biosensor data with high efficiency is used for detection of dengue virus serotypes 2 (DENV-2) and Chikungunya virus (CHIKV) concentration via salphen-Zn (II) and salphen-Cu (II), respectively, in human samples.

¹H-NMR and ¹³C-NMR have been used via PerkinElmer LAMBDA 35 instrument. The authors also used a double beam spectrophotometer with (CH₃)4Si (TMS) as reference and dimethyl sulfoxide as solvent reference in pH = 7.0. Various DNA concentrations have been used for UV spectrophotometry at 300 nm and 400 nm for zinc and copper complexes, respectively. BRUKER mass spectra with DIONEX Ultimate 3000 LC model were used for all measurements. Mettler Teledo model (DSC882e) of differential scanning calorimeter (DSC) was used for measure the melting temperature of metal zinc and copper complexes. The morphology of the silica Nano spheres (SiNs) were scanned by FESEM with Model JSM-6700F from Japan.

The Cu (II) and Zn (II)-salphen-viruses DNA system for CHIKV and DENV-2, respectively, in different concentration have been investigated via various spectroscopies (Figure 3). CHIKV and DENV-2 DNA were selected from human saliva and urine samples as models for conformations of human G4-DNA. By increasing the amounts of DNAs, and G4, the UV–Vis bands of located above 300 nm, experienced a hypochromic effect. The Cu2+ complex exhibits selectivity towards the G4, and there is a similar affinity for Zn²⁺ complex binds to the G4. These results collectively suggest that the Cu²⁺ complex is stronger than the Zn2+ complex. The authors have found copper (II) and zinc (II) compounds and nucleic acid-complexes are strongly fluorescent molecules in the low energy range, from the visible to the near-infrared. Since the fluorescent emission of Zn (II) and Cu (II) complexes are enhanced by the binding to nucleic acids upon visible light exposure when bound to DNA. These complexes are important as selective fluorescent probes for nucleic acids and to highlight their potential application. UV–vis spectroscopy is an accurate for finding the extent of ligand interaction with DNA and metallic complexes–DNA binding. Generally, the binding of intercalative compounds to DNA can be characterized through absorption spectral titrations, where lowering in absorbance (hypochromism) and shift to longer wavelengths (red shift) were observed in this work.

The serum samples have been provided as citrate and collected in tubes after blood is allowed to clot. Then, it has been separated by centrifugation, and the authors have kept serum refrigerated at 4°C or frozen at –20°C. It is notable; specimens have been confirmed by Centres for Disease Control (CDC)-Dengue Branch previously. For the work, these samples have been frozen previously, and the diagnostic practiced tests at the CDC-Dengue Branch have been validated in serum and plasma. Therefore, plasma separated in lavender or heparins are suitable and acceptable for serology testing.

In the past decade, three-dimensional (3D) printing has gained attention in areas such as medicine, engineering, manufacturing art and most recently in education. In biomedical, the development of a wide range of biomaterials has catalysed the considerable role of 3D printing (3DP), where it functions as synthetic frameworks in the form of scaffolds, constructs or matrices. The purpose of this paper is to present the state-of-the-art literature coverage of 3DP applications in tissue engineering (such as customized scaffoldings and organs, and regenerative medicine).

This review focusses on various 3DP techniques and biomaterials for tissue engineering (TE) applications. The literature reviewed in the manuscript has been collected from various journal search engines including Google Scholar, Research Gate, Academia, PubMed, Scopus, EMBASE, Cochrane Library and Web of Science. The keywords that have been selected for the searches were 3 D printing, tissue engineering, scaffoldings, organs, regenerative medicine, biomaterials, standards, applications and future directions. Further, the sub-classifications of the keyword, wherever possible, have been used as sectioned/sub-sectioned in the manuscript.

3DP techniques have many applications in biomedical and TE (B-TE), as covered in the literature. Customized structures for B-TE applications are easy and cost-effective to manufacture through 3DP, whereas on many occasions, conventional technologies generally become incompatible. For this, this new class of manufacturing must be explored to further capabilities for many potential applications.

This review paper presents a comprehensive study of the various types of 3DP technologies in the light of their possible B-TE application as well as provides a future roadmap.

This paper aims to isolate fungal strains producing natural colours, explore their application as colourant in paints and develop cost-effective durable natural paints.

Fungal strains producing natural colours of different shades were isolated. Colourant production was carried out by fermentation method. Natural lime, milk, oil-in-water emulsion paints using natural microbial colours and eco-friendly ingredients were prepared. Bio-paint applications were carried out and evaluated.

Our results indicate that microbes in general and fungi in specific represent dependable source of variety of natural colours, and cost-effective durable natural paints can be prepared with commonly available natural ingredients using scientific information based on history of paints.

Natural colours are gaining importance because of their use in health, nutrition, pharmaceutical, textile and environmental applications. Nature is quite rich in several types of colourants. Chemical synthesis of synthetic dyes is complex and not environmental friendly. Microbial dyes manufactured can evade inherent environmental problems of synthetic dyes and offer significant opportunity as a colourant in paints. However, only generally regarded as safe microbial strains are to be considered for colour production.

Choosing natural alternatives to protect the health and environment is the need of hour. Fungal colourants are relatively more stable and robust and offer significant opportunity as a colourant in paints. Cost-effective durable natural paints can be prepared using selected stable fungal colourants with commonly available natural ingredients. High diversity of rich and complex natural colourants can be obtained from microorganisms. With the available techniques of fermentation, natural colours can be produced in large quantities of on an economically viable scale and explored for their applications.

Bio-paints are eco-friendly natural paints, low volatile organic compounds (VOC) paints or organic paints alternate to conventional paints. Most of these natural paints are durable, breathable, prevent moisture problems, contribute to a positive room climate, use safer technology and are less energy-intensive than conventional latex paints to produce. These paints improve indoor air quality and reduce urban smog and offer beneficial characteristics such as low odour, excellent durability and a washable finish.

Many of the old art works that still survive today are a tangible proof and evidence of beauty and durability of natural paints. Organic materials used in these paints include natural pigments of mineral, plant and animal origin and other raw biodegradable ingredients. Successful commercialisation of many microbial pigments for food and textile applications is reported in literature. Therefore, present research work aims at developing natural paints using microbial pigments and recipes that have been successfully used by people for years.

Additive manufacturing (AM) or solid freeform fabrication (SFF) technique is extensively used to produce intrinsic 3D structures with high accuracy. Its significant contributions in the field of tissue engineering (TE) have significantly increased in the recent years. TE is used to regenerate or repair impaired tissues which are caused by trauma, disease and injury in human body. There are a number of novel materials such as polymers, ceramics and composites, which possess immense potential for production of scaffolds. However, the major challenge is in developing those bioactive and patient-specific scaffolds, which have a required controlled design like pore architecture with good interconnectivity, optimized porosity and microstructure. Such design not only supports cell proliferation but also promotes good adhesion and differentiation. However, the traditional techniques fail to fulfill all the required specific properties in tissue scaffold. The purpose of this study is to report the review on AM techniques for the fabrication of TE scaffolds.

The present review paper provides a detailed analysis of the widely used AM techniques to construct tissue scaffolds using stereolithography (SLA), selective laser sintering (SLS), fused deposition modeling (FDM), binder jetting (BJ) and advanced or hybrid additive manufacturing methods.

Subsequently, this study also focuses on understanding the concepts of TE scaffolds and their characteristics, working principle of scaffolds fabrication process. Besides this, mechanical properties, characteristics of microstructure, in vitro and in vivo analysis of the fabricated scaffolds have also been discussed in detail.

The review paper highlights the way forward in the area of additive manufacturing applications in TE field by following a systematic review methodology.

The purpose of this paper is to establish a suitable procedure for producing antimicrobial 100 per cent cotton textiles using zinc pyrithione. Zinc pyrithione being bacteriostatic in nature is eco-friendly and safe, both for manufacturer to apply and consumer to use.

After conducting laboratory trials, bulk trial has also been conducted, and efficacy of zinc pyrithione as bacteriostatic has been quantitatively determined. The durability of antimicrobial finish was also checked before and after repeated domestic laundry.

The findings indicated that it is possible to produce durable antimicrobial 100 per cent cotton textiles in bulk using zinc pyrithione.

Any exporting textile processing mill can directly use the findings of this work and can produce antimicrobial textiles in their factory.

Any exporting textile mill can increase their export earnings by producing antimicrobial textiles. The antimicrobial textiles are in great demand in Asia-Pacific region and have already touched exports of US$497.4m in 2015 and is projected to reach US$1,076.1m by 2026.

The textile user can get protection against pathogenic or odour-causing microorganisms using this hygiene finish in different end uses.

The work is original. Very few references are available on zinc pyrithione. First, laboratory studies were done, and bacteriostatic properties of zinc pyrithione were determined quantitatively followed by bulk trial.

Functionalization of organic cotton fabrics (OCFs) by in situ deposition of chitosan reduced-stabilized silver nanoparticles (AgNPs). No other toxic chemicals used to warrant an ecofriendly synthesis protocol. Human toxicity of silver systematically avoided to use as textile clothing. Primary colors (nearly-red, yellow and blue) were imparted on OCFs via localized surface plasmon resonance (LSPR) of AgNPs. Decent mechanical properties and laundering durability in terms of antibacterial/fastness test improved mechanical properties.

Silver nanoparticles can be synthesized by using silver nitrate along with commercially available chitosan. Due to the surface LSPR property of silver nanoparticles, it exhibits versatile colors depending on the synthesizing procedures. The coloration occurs due to the electrostatic interaction between the AgNPs and chitosan-treated OCF. The nanotreated fabrics provide excellent mechanical properties with improved antibacterial effects.

X-ray fluorescence (XRF) analysis quantifies the developed materials in the substrates. Scanning electron microscopy (SEM) characterization indicates the appearance and morphologies of silver nanoparticles into the fabric surface after the coloration process. It proves that the treated cotton knit fabric exhibits the LSPR optical features of AgNPs. The antibacterial and mechanical properties confirm the improved functionality of products.

Improved mechanical properties, antibacterial performances and coloration effects on organic cotton substrates in terms of chitosan-mediated nanosilver are not yet studied.

Cleanrooms are highly controlled enclosed rooms where air quality is monitored and ensured to have less contamination according to standard cleanliness level. Air filters are used to optimize indoor air quality and remove air pollutants. Filter media and filtering system are decided as per requirement. Depth filter media are mostly used in cleanroom filtrations. This paper aims to present a comprehensive review of the evolution of cleanroom filter media. It evaluates the advantages and disadvantages of air filter media. It is also studied which air filters have additional properties such as anti-microbial properties, anti-odour properties and chemical absorbent. Development and innovation of air filters and filtration techniques are necessary to improve the performance via the synergistic effect and it can be a possible avenue of future research.

This paper aims to drive the future of air filter research and development in achieving high-performance filtration with high filtration efficiency, low operational cost and high durability. Air pollutants are classified into three types: suspended particles, volatile organic pollutants and microorganisms. Technologies involved in purification are filtration, water washing purification, electrostatic precipitation and anion technology. They purify the air by running it through a filter medium that traps dust, hair, pet fur and debris. As air passes through the filter media, they function as a sieve, capturing particles. The fibres in the filter medium provide a winding path for airflow. There are different types of air filters such as the high-efficiency particulate air filter, fibreglass air filter and ultra-low particulate air filter.

Emerging filtration technologies and filters such as nanofibres, filters with polytetrafluoroethylene membrane are likely to become prevalent over the coming years globally. The introduction of indoor air filtration with thermal comfort can be a possible avenue of future research along with expanding indoor environment monitoring and improving air quality predictions. New air filters and filtration technologies having better performance with low cost and high durability must be developed which can restrict multiple types of pollutants at the same time.

The systematic literature review approach used in this paper highlights the emerging trends and issues in cleanroom filtration in a structured and thematic manner, enabling future work to progress as it will continue to develop and evolve.

Recently, powerful instruments for biomedical engineering research studies, including disease modeling, drug designing and nano-drug delivering, have been extremely investigated by researchers. Particularly, investigation in various microfluidics techniques and novel biomedical approaches for microfluidic-based substrate have progressed in recent years, and therefore, various cell culture platforms have been manufactured for these types of approaches. These microinstruments, known as tissue chip platforms, mimic in vivo living tissue and exhibit more physiologically similar vitro models of human tissues. Using lab-on-a-chip technologies in vitro cell culturing quickly caused in optimized systems of tissues compared to static culture. These chipsets prepare cell culture media to mimic physiological reactions and behaviors.

The authors used the application of lab chip instruments as a versatile tool for point of health-care (PHC) applications, and the authors applied a current progress in various platforms toward biochip DNA sensors as an alternative to the general bio electrochemical sensors. Basically, optical sensing is related to the intercalation between glass surfaces containing biomolecules with fluorescence and, subsequently, its reflected light that arises from the characteristics of the chemical agents. Recently, various techniques using optical fiber have progressed significantly, and researchers apply highlighted remarks and future perspectives of these kinds of platforms for PHC applications.

The authors assembled several microfluidic chips through cell culture and immune-fluorescent, as well as using microscopy measurement and image analysis for RNA sequencing. By this work, several chip assemblies were fabricated, and the application of the fluidic routing mechanism enables us to provide chip-to-chip communication with a variety of tissue-on-a-chip. By lab-on-a-chip techniques, the authors exhibited that coating the cell membrane via poly-dopamine and collagen was the best cell membrane coating due to the monolayer growth and differentiation of the cell types during the differentiation period. The authors found the artificial membrane, through coating with Collagen-A, has improved the growth of mouse podocytes cells-5 compared with the fibronectin-coated membrane.

The authors could distinguish the differences across the patient cohort when they used a collagen-coated microfluidic chip. For instance, von Willebrand factor, a blood glycoprotein that promotes hemostasis, can be identified and measured through these type-coated microfluidic chips.

Paper aims to preparation of new acid disperse dyes based on thiadiazol derivatives and evaluation of their use as antimicrobial colorants in digital transfer-printing ink formulations for printing onto polyester fabric substrates.

New disperse dyes based on 1,3,4 - thiadiazol derivative (dyes 1–3) were prepared and evaluated by different analysis then formulated as colored materials in the ink formulations. The viscosity, dynamic surface tension and particle size distribution of the prepared inks were measured. The printed polyester fabric substrates were tested using a variety of tests, including light fastness, washing, alkali perspiration and Crock fastness, as well as depth of penetration. Density-functional theory (DFT) calculations were carried out at the Becke3-Lee-Yang-parr (B3LYP) level using the 6–311** basis set, and the biological activity of the prepared disperse dyes was investigated.

The obtained results of the physical of the prepared ink revealed that thiadiazol disperse ink is a promising ink formulation for polyester printing and agrees with the quality of the printed polyester fabric. The optimization geometry for molecular structures agreed with the analysis of these compounds. The HOMO/LUMO and energy gap of the studied system were discussed. The molecular docking analysis showed strong interaction with DNA Gyrase and demonstrated to us the high ability of these inks to act as antimicrobial agents.

The prepared inks containing the prepared thiadiazol disperse dye were high-performance and suitable for this type of printing technique, according to the results. The prepared inks resist the growth of microorganisms and thus increase the ink's storage stability.

The prepared disperse dyes based on 1,3,4 - thiadiazol derivative (dyes 1–3) can be a promising colorant in different applications, like some types of paint formulations and as a colorant in printing of different fabric substrates.

Another Christmas month is upon us, following it seems quickly on others that have been. Such is the relativity of Time, it is not yesteryear, but could be yester‐month or even yester‐week. The seasons pass like youth, all too soon. Our minds return to other Christmas months of yore — “Memories are like Christmas roses!”, the old saying goes. The children, singing much‐loved hymns and carols, happy family settings, a birth, christening, so much to look forward to in the new year. There are not always such happy memories, but memories just the same — Christmas in war‐time, Earth's joys growing dimmer each year, change and decay, life drawing to a close for many a soul; old folk tend to see Christmas as a time of passing, of leaving the world behind.