Search results

This paper examines the relationships between bank switching and both customer vulnerability and consumer-oriented policies (financial education and disclosure practices).

The analysis employs microdata from the Special Eurobarometer on Financial Products and Services, for 24 European nations. It carries out a probit estimation on the factors explaining propensity of bank switching, focusing on three characteristics associated with customer vulnerability: an advanced age, low educational attainment and residence in a rural or a relatively poor region.

The authors report that the probability of bank switching is significantly lower for three groups of vulnerable customers: the elderly, the less educated and those living in deprived regions. Further the authors identify that national financial education policies and disclosure practices have no significant effects on bank switching.

Based on these results, the authors propose more targeted policies recognising customers' heterogeneity are required to increase bank switching behaviour.

This paper exploits a unique source of information on bank switching behaviour and customer characteristics across European nations. These data are complemented with information about consumer financial education policies and disclosure practices from the World Bank and geographical, market and regulatory factors at the regional and national levels. The paper contributes to two academic areas. First, it presents further evidence on heterogeneity of bank customer switching behaviour, addressed at improving the understanding of customer vulnerability in banking services. Second, it examines the efficacy of consumer-oriented policies (financial literacy and disclosure practices) in encouraging bank switching.

Conventional isolated dc–dc converters offer an efficient solution for performing voltage conversion with a large improved voltage gain. However, the small-signal analysis of these converters shows that a right-half-plane (RHP) zero appears in their control-to-output transfer function, exhibiting a nonminimum-phase stability. This RHP zero can limit the frequency response and dynamic specifications of the converters; therefore, the output voltage response is sluggish. To overcome these problems, the purpose of this study is to analyze, model and design a new isolated forward single-ended primary-inductor converter (IFSEPIC) through RHP zero alleviation.

At first, the normal operation of the suggested IFSEPIC is studied. Then, its average model and control-to-output transfer function are derived. Based on the obtained model and Routh–Hurwitz criterion, the components are suitably designed for the proposed IFSEPIC, such that the derived dynamic model can eliminate the RHP zero.

The advantages of the proposed IFSEPIC can be summarized as: This converter can provide conditions to achieve fast dynamic behavior and minimum-phase stability, owing to the RHP zero cancellation; with respect to conventional isolated converters, a larger gain can be realized using the proposed topology; thus, it is possible to attain a smaller operating duty cycle; for conventional isolated converters, transformer core saturation is a major concern, owing to a large magnetizing current. However, the average value of the magnetizing current becomes zero for the proposed IFSEPIC, thereby avoiding core saturation, particularly at high frequencies; and the input current of the proposed converter is continuous, reducing input current ripple.

The key benefits of the proposed IFSEPIC are shown via comparisons. To validate the design method and theoretical findings, a practical implementation is presented.

This study aims to regarding the application of traditional pulse frequency modulation control full-bridge LLC resonant converters in wide output voltage fields such as on-board chargers, there are issues with wide frequency adjustment ranges and low conversion efficiency.

To address these issues, this paper proposes a fixed-frequency pulse width modulation (PWM) control strategy for a full-bridge LLC resonant converter, which adjusts the gain by adjusting the duty cycle of the switches. In the full-bridge LLC converter, the two switches of the lower bridge arm are controlled by a fixed-frequency and fixed duty cycle, with their switching frequency equal to the resonant frequency, whereas the two switches of the upper bridge arm are controlled by a fixed-frequency PWM to adjust the output voltage. The operation modes of the converter are analyzed in detail, and a mathematical model of the converter is established. The gain characteristics of the converter under the fixed-frequency PWM control strategy are deeply analyzed, and the conditions for implementing zero-voltage switching (ZVS) soft switching in the converter are also analyzed in detail. The use of fixed-frequency PWM control simplifies the design of resonant parameters, and the fixed-frequency control is conducive to the design of magnetic components.

According to the fixed-frequency PWM control strategy proposed in this paper, the correctness of the control strategy is verified through simulation and the development and testing of a 500-W experimental prototype. Test results show that the primary side switches of the converter achieve ZVS and the secondary side rectifier diodes achieve zero-current switching, effectively reducing the switching losses of the converter. In addition, the control strategy reduces the reactive circulating current of the converter, and the peak efficiency of the experimental prototype can reach 95.2%.

The feasibility of the fixed-frequency PWM control strategy was verified through experiments, which has significant implications for improving the efficiency of the converter and simplifying the design of resonant parameters and magnetic components in wide output voltage fields such as on-board chargers.

Dielectric barrier discharge (DBD) is widely used in the treatment of skin disease, surface modification of material and other fields of electronics. The purpose of this paper is to design a high-performance power supply with a compact structure for excimer lamps in electronics application.

To design a high-performance power supply with a compact structure remains a challenge for excimer lamps in electronics application, a current-source type power supply in a single stage with power factor correction (PFC) is proposed. It consists of an excitation voltage generation unit and a PFC unit. By planning the modes of the excitation voltage generation unit, a bipolar pulse excitation voltage with a high rising and falling rate is generated. And a high power factor (PF) on the AC side is achieved by the interaction of a non-controlled rectifier and two inductors.

The experimental results show that not only a high-frequency and high-voltage bipolar pulse excitation voltage with a high average rising and falling rate (7.51GV/s) is generated, but also a high PF (0.992) and a low total harmonic distortion (5.54%) is obtained. Besides, the soft-switching of all power switches is realized. Compared with the sinusoidal excitation power supply and the current-source power supply, the proposed power supply in this paper can take advantage of the potential of excimer lamps.

A new high-performance power supply with a compact structure for DBD type excimer lamps is proposed. The proposed power supply can work stably in a wide range of frequencies, and the smooth regulation of the discharge power of the excimer lamp can be achieved by changing the switching frequency. The ideal excitation can be generated, and the soft switching can be realized. These features make this power supply a key player in the outstanding performance of the DBD excimer lamps application.

Switching behavior is predominantly seen in the consumer buying behavior of the mobile industry. This research aims to identify the factors influencing consumers to switch from their present mobile service provider. The consumer of the mobile industry operates in a dynamic and ever-changing environment that is difficult to predict, so this paper aims to focus on these issues.

The selection of factors was made with the help of qualitative study and quantitative research methods for further findings; with the help of a structured questionnaire, a total of 514 valuable responses were collected to get the results. Exploratory factor analysis (EFA), confirmatory factor analysis (CFA) and structural equation modeling (SEM) were used to analyze the data.

The finding shows that technology and edge-on-competition (TEC) and pricing have a negative influence on customer switching behavior. The switching cost (SC) is the most significant factor and has a positive impact, while service encounter failure (SEF) also positively impacts switching behavior.

The findings provide important implications for consumers switching brands if they are finding alternative offers that are cost-effective and SEF from service providers

The study of one of the largest mobile markets is learning lessons for other markets around the world. This study will be helpful for mobile service provider companies in their branding and marketing strategies. This study will also be helpful to practitioners, educators and researchers in understanding the consumer behavior of mobile users.

The learning of the largest mobile market will be a great learning lesson for other mobile markets around the world. Consumer behavior will help marketers follow ethical practices and make their strategy so a consumer does not switch brands and remain satisfied with the existing brand.

The study provides unique learning for practitioners, educators and researchers to understand the consumer behavior of mobile users. This will help marketers create factors that stop consumers from switching brands and develop strategies to retain customers.

The adoption of mobile payment remains low in certain regions, highlighting the need to identify the factors that enable and inhibit its adoption. This study aims to address this gap by investigating the role of information security, loss aversion and the moderating influence of the herd effect on Inertia and behavioral intentions in the adoption of mobile payment systems.

A structural equation model was developed and tested with 332 valid questionnaires to examine the proposed hypotheses.

The empirical results reveal that information security plays a significant role as an enabler, while loss aversion acts as an inhibitor of mobile payment adoption. Furthermore, the study uncovers the moderating influence of the herd effect on the relationship between Inertia and behavioral intentions.

This study was conducted in a specific region and may not be generalizable to other regions. Future studies could expand the sample size and scope to enhance the external validity of the findings.

This study offers practical implications for mobile payment service providers. Understanding the key enabling and inhibiting factors identified in this study can guide providers in designing and improving their services. Strengthening information security measures can help build trust among potential adopters, while offering incentives can mitigate the impact of loss aversion and encourage early adoption.

The findings of this study have social implications as they contribute to promoting the adoption of mobile payment systems. Increased adoption can enhance financial inclusion and stimulate economic development.

This study provides novel insights into the enabling and inhibiting factors of mobile payment adoption and highlights the moderating role of the herd effect. By shedding light on the influence of social norms on individual behavior in the context of mobile payment adoption, this study contributes to the existing literature and advances our understanding of this phenomenon.

The purpose of this paper is to propose a new method that allows to compare the magnetic pressures of different pulse width modulation (PWM) strategies in a fast and efficient way.

The voltage harmonics are determined using the double Fourier integral. As for current harmonics and waveforms, a new generic model based on the Park transformation and a dq model of the machine was established taking saturation into consideration. The obtained analytical waveforms are then injected into a finite element software to compute magnetic pressures using nodal forces.

The overall proposed method allows to accelerate the calculations and the comparison of different PWM strategies and operating points as an analytical model is used to generate current waveforms.

While the analytical expressions of voltage harmonics are already provided in the literature for the space vector pulse width modulation, they had to be calculated for the discontinuous pulse width modulation. In this paper, the obtained expressions are provided. For current harmonics, different models based on a linear and a nonlinear model of the machine are presented in the referenced papers; however, these models are not generic and are limited to the second range of harmonics (two times the switching frequency). A new generic model is then established and used in this paper after being validated experimentally. And finally, the direct injection of analytical current waveforms in a finite element software to perform any magnetic computation is very efficient.

The purpose of this paper is to examine the resistance behavior of smart factories in small and medium-sized enterprises (SMEs). Drawing upon dual factor perspective, this study examines how two types of quality and perceived usefulness impact user resistance as enabling factors and how switching cost, skepticism, habit and inertia contribute to user resistance as inhibiting factors. Additionally, multi-group analysis is employed to compare small and medium enterprises.

Purposive sampling technique was employed to collect 460 Korean SMEs employees, consisting of 235 small enterprises and 225 medium enterprises. Partial least squares structural equation modeling was used for data analysis.

The results reveal that all three inhibiting factors, switching cost, skepticism and habit, are key antecedents of inertia. In small enterprises, skepticism has a greater impact on inertia, which in turn strongly affects resistance. Additionally, system quality is more crucial for small enterprises, whereas information quality holds more importance for medium enterprises in mitigating resistance. Moreover, when the implementation level of a smart factory is high, the effect of perceived usefulness on user resistance diminishes.

This study has revealed the importance of considering both enabling and inhibiting factors for the adoption of smart factory systems in the context of SMEs. Additionally, it has provided evidence that as the level of the smart factory system increases, the effect of perceived usefulness on user resistance decreases, thus making the transition to smart factory systems more challenging.

This study aims to offer a hybrid stand-alone system for electric vehicle (EV) charging stations (CS), an emerging power scheme due to the availability of renewable and environment-friendly energy sources. This paper presents the analysis of a photovoltaic (PV) with an adaptive neuro-fuzzy inference system (ANFIS) algorithm, solid oxide fuel cell (SOFC) and a battery storage scheme incorporated for EV CS in a stand-alone mode. In previous studies, either the hydrogen fuel of SOFC or the irradiance is controlled using artificial neural network. These parameters are not controlled simultaneously using an ANFIS-based approach. The ANFIS-based stand-alone hybrid system controlling both the fuel flow of SOFC and the irradiance of PV is discussed in this paper.

The ANFIS algorithm provides an efficient estimation of maximum power (MP) to the nonlinear voltage–current characteristics of a PV, integrated with a direct current–direct current (DC–DC) converter to boost output voltage up to 400 V. The issue of fuel starvation in SOFC due to load transients is also mitigated using an ANFIS-based fuel flow regulator, which robustly provides fuel, i.e. hydrogen per necessity. Furthermore, to ensure uninterrupted power to the CS, PV is integrated with a SOFC array, and a battery storage bank is used as a backup in the current scenario. A power management system efficiently shares power among the aforesaid sources.

A comprehensive simulation test bed for a stand-alone power system (PV cells and SOFC) is developed in MATLAB/Simulink. The adaptability and robustness of the proposed control paradigm are investigated through simulation results in a stand-alone hybrid power system test bed.

The simulation results confirm the effectiveness of the ANFIS algorithm in a stand-alone hybrid power system scheme.

Drawing upon resource dependence theory, this study aims to examine how a firm’s information technology (IT) capabilities (i.e. IT integration and IT reconfiguration) influence its responses to disruptions – bridging with a current supplier and buffering with an alternative supplier. We further examine how such relationships are moderated by the firm–supplier relative dependence (i.e. firm dependence advantage and supplier dependence advantage).

Based on data from 141 match-paired surveys of firms in China, we test our model.

Our study finds that IT integration positively influences bridging and IT reconfiguration positively influences buffering. Furthermore, our findings indicate that the positive impact of IT integration on bridging is negatively influenced by the firm’s dependence (FD) advantage but positively moderated by the supplier’s dependence advantage. By contrast, the positive impact of IT reconfiguration on buffering is negatively influenced by the FD advantage.

Our study provides a more nuanced insight into the effects of IT capabilities on disruption responses and a better understanding of the buyer–supplier dependence boundary conditions under which these effects vary.