Search results

This study aims to investigate the rarefaction effects on flow and thermal performances of an equivalent sand-grain roughness model for aerodynamic thrust bearing.

In this study, a model of gas lubrication thrust bearing was established by modifying the wall roughness and considering rarefaction effect. The flow and lubrication characteristics of gas film were discussed based on the equivalent sand roughness model and rarefaction effect.

The boundary slip and the surface roughness effect lead to a decrease in gas film pressure and temperature, with a maximum decrease of 39.2% and 8.4%, respectively. The vortex effect present in the gas film is closely linked to the gas film’s pressure. Slip flow decreases the vortex effect, and an increase in roughness results in the development of slip flow. The increase of roughness leads to a decrease for the static and thermal characteristics.

This work uses the rarefaction effect and the equivalent sand roughness model to investigate the lubrication characteristics of gas thrust bearing. The results help to guide the selection of the surface roughness of rotor and bearing, so as to fully control the rarefaction effect and make use of it.

Flow induced by rotating disks is of great practical importance in several engineering applications such as rotating heat exchangers, turbine disks, pumps and many more. The present research has been freshly displayed regarding the implementation of an engine oil-based Casson tri-hybrid nanofluid across a rotating disk in mass and heat transferal developments. The purpose of this study is to contemplate the attributes of the flowing tri-hybrid nanofluid by incorporating porosity effects and magnetization and velocity slip effects, viscous dissipation, radiating flux, temperature slip, chemical reaction and activation energy.

The articulated fluid flow is described by a set of partial differential equations which are converted into one set of higher-order ordinary differential equations (ODEs) by using convenient conversions. The numerical solution of this transformed set of ODEs has been spearheaded by using the effectual bvp4c scheme.

The acquired results show that the heat transmission rate for the Casson tri-hybrid nanofluid is intensified by, respectively, 9.54% and 11.93% when compared to the Casson hybrid nanofluid and Casson nanofluid. Also, the mass transmission rate for the Casson tri-hybrid nanofluid is augmented by 1.09% and 2.14%, respectively, when compared to the Casson hybrid nanofluid and Casson nanofluid.

The current investigation presents an educative response on how the flow profiles vary with changes in the inevitable flow parameters. As per authors’ knowledge, no such scrutinization has been carried out previously; therefore, our results are novel and unique.

This study aims to provide an alternative adoption to overcome the energy crisis and environmental effluence by comparative theoretical and trial testing analysis of an innovative combined condenser unit over traditional individual condenser unit water heating systems.

The presented innovative new unit of the combined condenser heat pipe works efficiently through its improved idea and unique design, providing uniform heating to improve the heat transfer and, finally, the temperature of water increases without enhancing the cost. In this design, all these five evaporator units were connected with a single combined condenser unit in such a manner that after the condensation of heat transfer fluid vapour, it goes equally into the evaporator pipe.

The maximum temperature of hot water obtained from the combined condenser heating system was 60.6, 55.5 and 50.3°C at a water flow rate of 0.001, 0.002 and 0.003 kg/s, respectively. The first and second law thermodynamic efficiency of the combined condenser heating system were 55.4%, 60.5% and 89.0% and 2.6%, 3.7% and 4.1% at 0.001, 0.002 and 0.003 kg/s of water flow rates, respectively. The combined condenser heat pipe solar evacuated tube heating system promoting progressive performance is considered efficient and environment-friendly compared to the traditional condenser unit water heating system.

Innovative combined condenser heat pipe evacuated tube collector assembly was designed and developed for the study. A comparative theoretical and experimental energy-exergy performance analysis was performed of innovated collective condenser and traditional individual condenser heat pipe water heating system at various mass flow rate.

Accurately evaluating fluid flow behaviors and determining permeability for deforming porous media is time-consuming and remains challenging. This paper aims to propose a novel machine-learning method for the rapid estimation of permeability of porous media at different deformation stages constrained by hydro-mechanical coupling analysis.

A convolutional neural network (CNN) is proposed in this paper, which is guided by the results of finite element coupling analysis of equilibrium equation for mechanical deformation and Boltzmann equation for fluid dynamics during the hydro-mechanical coupling process [denoted as Finite element lattice Boltzmann model (FELBM) in this paper]. The FELBM ensures the Lattice Boltzmann analysis of coupled fluid flow with an unstructured mesh, which varies with the corresponding nodal displacement resulting from mechanical deformation. It provides reliable label data for permeability estimation at different stages using CNN.

The proposed CNN can rapidly and accurately estimate the permeability of deformable porous media, significantly reducing processing time. The application studies demonstrate high accuracy in predicting the permeability of deformable porous media for both the test and validation sets. The corresponding correlation coefficients (R²) is 0.93 for the validation set, and the R² for the test set A and test set B are 0.93 and 0.94, respectively.

This study proposes an innovative approach with the CNN to rapidly estimate permeability in porous media under dynamic deformations, guided by FELBM coupling analysis. The fast and accurate performance of CNN underscores its promising potential for future applications.

The objective of this paper is to develop a condition-based maintenance (CBM) scheme for pneumatic cylinders. The CBM scheme will detect two common types of air leaking failure modes and identify the leaky/faulty cylinder. The successful implementation of the proposed scheme will reduce energy consumption, scrap and rework, and time to repair.

Effective implementation of maintenance is important to reduce operation cost, improve productivity and enhance quality performance at the same time. Condition-based monitoring is an effective maintenance scheme where maintenance is triggered based on the condition of the equipment monitored either real time or at certain intervals. Pneumatic air systems are commonly used in many industries for packaging, sorting and powering air tools among others. A common failure mode of pneumatic cylinders is air leaks which is difficult to detect for complex systems with many connections. The proposed method consists of monitoring the stroke speed profile of the piston inside the pneumatic cylinder using hall effect sensors. Statistical features are extracted from the speed profiles and used to develop a fault detection machine learning model. The proposed method is demonstrated using a real-life case of tea packaging machines.

Based on the limited data collected, the ensemble machine learning algorithm resulted in 88.4% accuracy. The algorithm can detect failures as soon as they occur based on majority vote rule of three machine learning models.

Early air leak detection will improve quality of packaged tea bags and provide annual savings due to time to repair and energy waste reduction. The average annual estimated savings due to the implementation of the new CBM method is $229,200 with a payback period of less than two years.

To the best of the authors’ knowledge, this paper is the first in terms of proposing a CBM for pneumatic systems air leaks using piston speed. Majority, if not all, current detection methods rely on expensive equipment such as infrared or ultrasonic sensors. This paper also contributes to the research gap of economic justification of using CBM.

Vehicle allocation problems (VAPs), which are frequently confronted in many transportation activities, primarily including but not limited to full truckload freight transportation operations, induce a significant economic impact. Despite the increasing academic attention to the field, literature still fails to match the needs of and opportunities in the growing industrial practices. In particular, the literature can grow upon the ideas on sustainability, Industry 4.0 and collaboration, which shape future practices not only in logistics but also in many other industries. This review has the potential to enhance and accelerate the development of relevant literature that matches the challenges confronted in industrial problems. Furthermore, this review can help to explore the existing methods, algorithms and techniques employed to address this problem, reveal directions and generate inspiration for potential improvements.

This study provides a literature review on VAPs, focusing on quantitative models that incorporate any of the following emerging logistics trends: sustainability, Industry 4.0 and logistics collaboration.

In the literature, sustainability interactions have been limited to environmental externalities (mostly reducing operational-level emissions) and economic considerations; however, emissions generated throughout the supply chain, other environmental externalities such as waste and product deterioration, or the level of stakeholder engagement, etc., are to be monitored in order to achieve overall climate-neutral services to the society. Moreover, even though there are many types of collaboration (such as co-opetition and vertical collaboration) and Industry 4.0 opportunities (such as sharing information and comanaging distribution operations) that could improve vehicle allocation operations, these topics have not yet received sufficient attention from researchers.

The scientific contribution of this study is twofold: (1) This study analyses decision models of each reviewed article in terms of decision variable, constraint and assumption sets, objectives, modeling and solving approaches, the contribution of the article and the way that any of sustainability, Industry 4.0 and collaboration aspects are incorporated into the model. (2) The authors provide a discussion on the gaps in the related literature, particularly focusing on practical opportunities and serving climate-neutrality targets, carried out under four main streams: logistics collaboration possibilities, supply chain risks, smart solutions and various other potential practices. As a result, the review provides several gaps in the literature and/or potential research ideas that can improve the literature and may provide positive industrial impacts, particularly on how logistics collaboration may be further engaged, which supply chain risks are to be incorporated into decision models, and how smart solutions can be employed to cope with uncertainty and improve the effectiveness and efficiency of operations.

This paper aims to review the latest management developments across the globe and pinpoint practical implications from cutting-edge research and case studies.

This briefing is prepared by an independent writer who adds their own impartial comments and places the articles in context.

This research paper set out to explore how an Indonesian organization addressed hiring and training challenges while contributing to society through a Vocational and Education Training (VET) program. The VET intervention, “Project VALERIE,” reduced costs, provided jobs for graduates, and addressed local youth unemployment. Embracing a strategic CSR approach aligned with organizational and societal goals, creating shared value for every stakeholder. Fostering collaborative industry-education partnerships in this way bridged skill gaps and created a reliable talent pipeline. It’s a great example of a strategic win-win approach that other HR teams can replicate.

The briefing saves busy executives, strategists and researchers hours of reading time by selecting only the very best, most pertinent information and presenting it in a condensed and easy-to-digest format.

Purpose: This study examines the effect of uncertainties on the hospitality industry from different perspectives across the globe. The hospitality industry faces several contemporary issues and challenges that have the potential to impact its growth and development. This study aims to analyse the current problems and uncertainties in the hospitality sector.

Need for the Study: The hospitality industry plays a significant role in the global economy with various services, including accommodation, food and beverage, events, and tourism. However, the sector faces several contemporary issues and challenges that have the potential to impact its growth and development. This study provides an overview of the most significant problems and challenges facing the hospitality industry today.

Methodology: A systematic literature review was conducted to identify and synthesise relevant studies on the effect of uncertainties issues on the hospitality industry. A systematic search of the Web of Science and Scopus databases was conducted to determine relevant studies published between 2010 and 2021. Studies were screened and selected based on pre-defined inclusion and exclusion criteria. A thematic analysis was performed to categorise the uncertainties and issues in the hospitality industry.

Findings: The study identified several uncertainties and issues facing the hospitality industry, including the pandemic uncertainties, financial crisis, whether positive and negative impacts, terrorism attacks on hotels and tourist places, uncertainties in government policies, situational risks like uncertainties, ambiguity, cultural differences, changes in tourist preferences and changing habits of the tourist.

The purpose of this paper is to investigate the most recurrent variables characterizing the collaborative relationships of industrial symbiosis (IS) (hereinafter also referred to as “anatomic” variables) established in the attempt to adopt circular economy (CE) by collecting evidence from a rich empirical set of implementation cases in Italy.

The current literature on IS was reviewed, and a content analysis was performed to identify and define the “anatomic” variables affecting its adoption in the circular economy. We followed a multiple-case study methodology investigating 50 cases of IS in Italy and performed a content analysis of the “anatomic” variables characterizing each case.

This research proposes the “anatomic” variables (i.e. industrial sectors involved, public actors involvement, governmental support, facilitator involvement and geographical proximity) explaining the cases of IS in the circular economy. Each “anatomic” variable is discussed at length based on the empirical evidence collected, with a particular reference to the impact on the different development strategies (i.e. “bottom-up” and “top-down”) in the cases observed.

Current literature on IS focuses on a sub-set of variables characterizing collaboration in IS. This research builds on extant literature to define a new framework of five purposeful “anatomic” variables defining IS in the circular economy. Moreover, we also collect and discuss a broad variety of empirical evidence in what is a still under-investigated context (i.e. Italy).

Open innovation (OI), by now one of the major concepts for the analysis of innovation, is seen as a methodology for collaboratively designing and implementing solutions by engaging stakeholders in an iterative and inclusive service design process. This paper aims to empirically investigate OI capacities, defined as a cooperative, knowledge-sharing innovation ecosystem, and to explore how it can lead to improved performance of firms in Central and Eastern European (CEE) and Southeastern European (SEE) countries.

The study builds on the World Bank/European Bank for Reconstruction and Development (EBRD’s) Business Environment Enterprise Performance Survey (BEEPS) dataset for 2009, 2013 and 2019. Primarily, the research model was estimated using log-transformed ordinary least squares (OLS). Taking into consideration that this method might produce substantial bias, yielding misleading inferences, this study is fitting Poisson pseudo maximum likelihood estimators with robust standard errors and instrumental variable/generalized method of moments estimation (IV/GMM) approach for comparative results. Secondarily, the research model was tested using structural equation modelling (SEM) to investigate the relationship between five OI capacities and firm performance.

The findings indicate that there is a significant positive relationship between most OI capacities and firm performance, except for innovation, which did not show a statistically significant relationship with firm performance. Specifically, research and development (R&D), knowledge and coopetition are statistically significant and positively associated with firm performance, whereas transformation is statistically significant but negatively associated with firm performance. The IV/GMM estimations’ findings support the view that the firm performance is significantly affected by OI capacities, together with some control variables such as size, age, foreign ownership and year dummy to have a significant impact on firm performance.

This paper fills an identified gap in the literature by investigating the impact of OI on firm performance executed in the specific CEE and SEE country context.