Search results

This study aims to explore the influence of risk preference and information acquisition on outdoor tourism safety decision-making.

Five hundred twenty outdoor tourists were surveyed, and data were analyzed using two-stage regression.

Risk preference positively affects tourists’ safety decisions for outdoor travel. The greater the risk preference is, the more likely the tourists are to make the risky decision of outdoor tourism. Information acquisition significantly negatively affects tourists’ safety decisions for outdoor tourism. Tourists who obtain information through social channels are more likely to make safer travel decisions than those who do not.

Risk preference and information acquisition are introduced into outdoor tourism safety research.

A positive outlook on the impact of Industry 4.0 (I4.0) on sustainability prevails in the literature. However, some studies have highlighted potential areas of concern that have not yet been systematically addressed. The goal of this study is to challenge the assumption of a sustainable Fourth Industrial Revolution by (1) identifying the possible unintended negative impacts of I4.0 technologies on sustainability; (2) highlighting the underlying motivations and potential actions to mitigate such impacts; and (3) developing and evaluating alternative assumptions on the impacts of I4.0 technologies on sustainability.

Building on a problematization approach, a systematic literature review was conducted to develop potential alternative assumptions about the negative impacts of I4.0 on sustainability. Then, a Delphi study was carried out with 43 experts from academia and practice to evaluate the alternative assumptions. Two rounds of data collection were performed until reaching the convergence or stability of the responses.

The results highlight various unintended negative effects on environmental and social aspects that challenge the literature. The reasons behind the high/low probability of occurrence, the severity of each impact in the next five years and corrective actions are also identified. Unintended negative environmental effects are less controversial than social effects and are therefore more likely to generate widely accepted theoretical propositions. Finally, the alternative hypothesis ground is partially accepted by the panel, indicating that the problematization process has effectively opened up new perspectives for analysis.

This study is one of the few to systematically problematize the assumptions of the I4.0 and sustainability literature, generating research propositions that reveal several avenues for future research.

This study presents the results of an assessment of the barriers that can hinder the deployment of robotics and automation systems in developing countries through the lens of the Nigerian construction industry.

A scoping literature review was conducted through which barriers to the adoption of robotics and automation systems were identified, which helped in the formulation of a questionnaire survey. Data were obtained from construction professionals including architects, builders, engineers and quantity surveyors. Retrieved data were analyzed using percentages, frequencies, mean item scores and exploratory factor analysis.

Based on the mean scores, the top five barriers were the fragmented nature of the construction process, resistance by workers and unions, hesitation to adopt innovation, lack of capacity and expertise and lack of support from top-level managers. Through factor analysis, the barriers identified were categorized into four principal clusters namely, industry, human, economic and technical-related barriers.

This study provided a good theoretical and empirical foundation that can be useful to construction industry stakeholders, decision-makers, policymakers and the government in mapping out strategies to promote the incorporation and deployment of automation and robotics into the construction industry to attain the safety benefits they offer.

By identifying and evaluating the challenges that hinder the implementation of robotics and automation systems in the Nigerian construction industry, this study makes a significant contribution to knowledge in an area where limited studies exist.

Major maintenance projects are often regarded as maintenance activities regardless of the projects' complexity and scale. Consequently, very scarce research attention has hitherto been paid to the critical skills required when undertaking these projects. More specifically, the body of relevant knowledge is deprived of a study focusing on maintenance projects within the energy sector. In view of this shortcoming, this research aims to examine the critical project management (PM) skills required to deliver major maintenance projects within the energy sector.

Based on a quantitative research strategy, this study addressed the knowledge gap through a cross-sectional survey of professionals involved in the delivery of major maintenance projects in the United Kingdom's (UK) energy sector. Data obtained were analyzed via descriptive (e.g. frequencies, mean and standard deviation [SD]) and inferential statistical analyses (One sample t-test and exploratory factor analysis (EFA)).

Out of the 45 PM skills identified in the literature and examined by the respondents, the results obtained from the One sample t-test (based on p (1-tailed) = 0.05) showed that 37 were considered to be at least “important,” accounting for 80.4% of all the skills identified. EFA revealed a clustering of the PM skills items into seven components: “skills related to work scheduling and coordination”; “communication, risk, safety and stakeholder management skills”; “quality assurance skills”; “people management skills”; “skills related to forecasting scope and duration of outage”; “implementation of processes and time management skills” and “technical/engineering skills and experience pertaining to the outage and local site knowledge.”

This study has identified and contributed to the limited state-of-the-art skills project managers must possess to manage major maintenance projects in the energy sector successfully. The findings would be useful to organizations within the energy sector in ensuring that the organizations have suitable personnel in place to deliver major maintenance projects on the organizations' assets.

This study aims to improve a construction company's overall project delivery by utilising lean six sigma (LSS) methods combined with building information modelling (BIM) to design, modularise and manufacture various building elements in a controlled factory environment off-site.

A case study in a construction company utilised lean six sigma (LSS) methodology and BIM to identify non-value add waste in the construction process and improve sustainability.

An Irish-based construction company manufacturing modular pipe racks for the pharmaceutical industry utilised LSS to optimise and standardise their off-site manufacturing (OSM) partners process and leverage BIM to design skids which could be manufactured offsite and transported easily with minimal on-site installation and rework required. Productivity was improved, waste was reduced, less energy was consumed, defects were reduced and the project schedule for completion was reduced.

The case study was carried out on one construction company and one construction product type. Further case studies would ensure more generalisability. However, the implementation was tested on a modular construction company, and the methods used indicate that the generic framework could be applied and customized to any offsite company.

This is one of the few studies on implementing offsite manufacturing (OSM) utilising LSS and BIM in an Irish construction company. The detailed quantitative benefits and cost savings calculations presented as well as the use of the LSM methods and BIM in designing an OSM process can be leveraged by other construction organisations to understand the benefits of OSM. This study can help demonstrate how LSS and BIM can aid the construction industry to be more environmentally friendly.

This paper aims to adopt a comparative method using case law, statutes and secondary literature across both jurisdictions. This paper also draws on various theories of property ownership.

This paper conceptualises the legal relations embedded within condominium housing and the various theories of property ownership to ascertain how children’s interest fit within this framework. The laws of two jurisdictions, New South Wales and Singapore, are examined to determine how their strata law responds when children’s safety is at stake.

Drawing on pluralist moral theories of property law, the thesis advanced is that children’s issues within condominiums should not be subject to majoritarian rule especially when their safety is at stake. The paramount guiding value should be ensuring their safety within multi-owned housing communities. Using the law of two jurisdictions, New South Wales and Singapore, the central argument of this paper is that the law in these jurisdictions has rightfully adopted a protective approach towards children in multi-owned properties where their safety is at stake.

The literature on the law of multi-owned housing has largely focused on governance issues such as mediating between the majority owners’ interest with that of the minority owners’ interest. Children in multi-owned developments remain an under investigated area as children’s interests do not fit within the paradigm of majority versus minority interests. The paper advances the argument that children’s interest should be viewed through either a rights-based theory or pluralists’ theories of property law. Lessons from the New South Wales and Singapore experience are also drawn which might prove useful to other jurisdictions.

The growing awareness of climate risks associated with food safety issues has drawn the attention of stakeholders urging the food industry to carry out a sustainable food safety management system (FSMS). This study aims to investigate whether the critical success factors (CSFs) of sustainable FSMS can contribute to achieving climate neutrality, and how the adoption of FSMS 4.0 supported by the Industry Revolution 4.0 (IR 4.0) technologies moderates the impact of the CSFs on achieving climate neutrality.

Survey data from 255 food production firms in China and Vietnam were utilised for the empirical analysis. The research hypotheses were examined using structural equations modelling (SEM) with route analysis and bootstrapping techniques.

The results show that top management support, human resource management, infrastructure and integration appear as the significant CSFs that directly impact food production firms in achieving climate neutrality. Moreover, the results demonstrate that the adoption of FSMS 4.0 integrated with the three components (ecosystems, quality standards and robustness) significantly moderates the impact of the CSFs on achieving climate neutrality with lower inputs in human resources, infrastructure investment, integration and external assistance, and higher inputs in strengthening food safety administration.

This study provides empirical findings that fill the research gap in understanding the relationship between climate neutrality and the CSFs of sustainable FSMS while considering the moderating effects of the FSMS 4.0 components. The results provide theoretical and practical insights into how the food production sector can utilise IR 4.0 to attain sustainable FSMS for achieving climate neutrality.

This study aims to explore the managerial conception of the determinants and barriers of sustainability integration into management control systems (MCS) of manufacturing companies in Sri Lanka. Although existing literature has explored the factors that influence the adoption of specific management controls to handle environmental and social issues, the role of management conception has been underrepresented. Specifically, literature is scarce in identifying contextual and organisational factors that influence corporates beyond mere adoption of controls but to integrate with regular controls, especially in developing countries such as Sri Lanka.

A multiple case study approach has been used to identify the management conception of barriers and enablers for sustainability control integration. The analysis is conducted based on a theoretical framework extending the work of Gond et al. (2012) and George et al. (2016). To obtain an in-depth and multifaceted view, semi-structured interviews were conducted with managers in charge of different functional departments of five manufacturing companies.

The findings identified managers’ perceived factors, such as environmental impact, stakeholder pressure (customer, competitor and regulatory authorities) and top management commitment, showing a clear difference between strongly and weakly integrated companies. Contrary to the literature, domestic regulatory pressure and multinational ownership do not sufficiently drive MCS sustainability integration.

The findings have implications for managers and practitioners to anticipate the potential barriers and determinants of sustainability integration and provide guidance to take proper measures to deal with them when designing and implementing their MCS.

The study adds value to the literature by presenting a theoretical framework based on the triangulation of different theories to recognise the significance of management idea in sustainable integration. Furthermore, because sustainable integration of MCS is a novel idea, this research is one of the earlier attempts to highlight problems from the perspective of developing countries.

This study aims to develop an inclusive, multidisciplinary, flexible and organizationally adaptable safety risk management framework, including diversity management, that will be implemented to ensure safety is and remains at the desired level. If the number of incidents and potential incidents that could lead to accidents and their impact rates are to be reduced operationally and administratively, aviation safety risks and sources of risk must be better understood, sources of risk identified, and the safety risk management framework designed in an organization-specific and organization-wide sustainable way. At this point, it is necessary to draw the conceptual framework well and to define the boundaries of the concepts well. In this study, a framework model that can be adapted to the organization is proposed to optimize the management of risks and provide both efficient and effective resource allocation and organizational structure design in its operations and management functions.

The qualitative research method – triple techniques – was deemed appropriate for this study, which aims to identify, examine, interpret and develop the situations of safety management models. In this context, document analysis, business process modeling technique and Delphi techniques from qualitative research methods were used via integration as the methodology of this research.

To manage dynamic civil aviation management activities and business processes effectively and efficiently, the risk management process is the building block of the “Proposed Process Model” that supports the decision-making processes of aviation organizations and managers. This “Framework Conceptual Model” building block also helps build capacity and resilience by enabling continuous development, organizational learning, and flexible structuring.

This research is limited to air transportation and aviation safety management issues. This research is limited specifically to a safety-based risk management framework for the aviation industry. This research may have social implications as source saving, optimum resource use and capacity building will make a contribution to society and add value besides operational and practical implementation.

This research may contribute to more safe operations and functions in the aviation industry.

Management and academia may gain considerable support from this research to manage their safety risks via a corporate-tailored risk management framework, both improving resilience and developing corporate capacity. With this model presented, decision-makers will have a guiding structure that can optimally manage the main risk types that may be encountered in the safety risk in the fields of suppliers, manufacturers, demand changes, logistics, information management, environmental, legal and regulatory. Existing studies in the literature are generally in the form of algorithms and cannot be used as a decision-making support tool. This model aims to fill the gap in the literature. In addition, added value may be created by applying this model to optimum management safety risks in the real aviation industry and its related sectors.

Prefabricated technology is gradually being applied to the construction of subway stations due to its characteristic of mechanization. However, the prefabricated subway station in China is in the initial stage of development, which is prone to construction safety issues. This study aims to evaluate the construction safety risks of prefabricated subway stations in China and formulate corresponding countermeasures to ensure construction safety.

A construction safety risk evaluation index system for the prefabricated subway station was established through literature research and the Delphi method. Furthermore, based on the structure entropy weight method, matter-element theory and evidence theory, a hybrid evaluation model is developed to evaluate the construction safety risks of prefabricated subway stations. The basic probability assignment (BPA) function is obtained using the matter-element theory, the index weight is calculated using the structure entropy weight method to modify the BPA function and the risk evaluation level is determined using the evidence theory. Finally, the reliability and applicability of the evaluation model are verified with a case study of a prefabricated subway station project in China.

The results indicate that the level of construction safety risks in the prefabricated subway station project is relatively low. Man risk, machine risk and method risk are the key factors affecting the overall risk of the project. The evaluation results of the first-level indexes are discussed, and targeted countermeasures are proposed. Therefore, management personnel can deeply understand the construction safety risks of prefabricated subway stations.

This research fills the research gap in the field of construction safety risk assessment of prefabricated subway stations. The methods for construction safety risk assessment are summarized to establish a reliable hybrid evaluation model, laying the foundation for future research. Moreover, the construction safety risk evaluation index system for prefabricated subway stations is proposed, which can be adopted to guide construction safety management.