Search results

IT is known that the Library Association Council has devoted watchful care to the position of libraries in the event of war. As we write, the international situation is as dark as it has been at any time since 1919, and many have that calm, cold feeling that there is nothing to do but to tighten our belts and stand againt the onslaught. Even if that is still avoided, as all who listened to Lord Halifax trust it may be, there should be active protection of the library service which is one of those things which might so easily go under in a time of stress. The Library Association has done well in submitting to Government that experience in the last war proved the value of libraries for information and as a factor in the morale of the people; that their services should, so far as possible, be maintained even during hostilities; that there would be need of library provision for people, and especially for children, “evacuated” to areas where the existing library provision might often be inadequate; and that library buildings should not be used for purposes for which they are unsuitable, seeing that there will be many halls, schools and other buildings that would be better for food‐control, recruiting and so on.

This bibliography is offered as a practical guide to published papers, conference proceedings papers and theses/dissertations on the finite element (FE) and boundary element (BE) applications in different fields of biomechanics between 1976 and 1991. The aim of this paper is to help the users of FE and BE techniques to get better value from a large collection of papers on the subjects. Categories in biomechanics included in this survey are: orthopaedic mechanics, dental mechanics, cardiovascular mechanics, soft tissue mechanics, biological flow, impact injury, and other fields of applications. More than 900 references are listed.

Applies a sound theory to predict in‐plane bending deformation of flexible beams under large overall motions to predict the locus of the trailing end of the ply during wiping off the conveyor surface of the layup machine. A computerized numerical solution was used to estimate the locus of the trailing end of the ply for seven woven fabrics of wide range of thickness, weight, and bending rigidity. The least square method was employed to obtain regression relationship between the horizontal and vertical displacement of the trailing end of the ply for each of the seven fabrics. The regression equations and the slat height were used to calculate the minimum gap between two slats of the stacking conveyor so that the fabric trailing end does not touch the top or the side surfaces of a slat during the layup process.

Discusses how, in response to a desire by Japanese quality practitioners to promote QC technique, seven new QC tools were brought together. Provides the recommended manner for the utilisation of these techniques. Asserts quality thinking should become pro‐active rather than re‐active. Exemplifies the tools. Describes a number of relations methods. Discusses the process decision programme chart. Asserts this is also used to anticipate the unexpected and to plan contingencies. Concludes that the seven new QC tools are being promoted by the Japanese Society for QC Technique Development indicating they can be used most effectively when combined in an interrelated manner.

This paper traces the evolution of objective measurement of textile hand and comfort from Pierce through modern methodology and approaches. Special emphasis is given to discuss the contribution of the Kawabata Evaluation System (KES) towards advancing the state of objective measurement. Laboratory case studies are used to show how data generated by the KES and other instruments can be integrated into a comprehensive approach that attempts to explain human comfort response to garment wear in terms of fabric mechanical, surface and heat and moisture transfer properties.

The purpose of this paper is to study heat and steam transfer in a vertical air gap and improve thermal protective performance of protective clothing under thermal radiation and hot steam.

An experiment-based model was introduced to analyze heat and moisture transfer in the vertical air gap between the protective clothing and human body. A developed test apparatus was used to simulate different air gap sizes (3, 6, 9, 12, 15, 18, 21 and 24 mm). The protective clothing with different air gap sizes was subjected to dry and wet heat exposures.

The increase of the air gap size reduced the heat and moisture transfer from the protective clothing to the skin surface under both heat exposures. The minimum air gap size for the initiation of natural convection in the dry heat exposure was between 6 and 9 mm, while the air gap size for the occurrence of natural convection was increased in the wet heat exposure. In addition, the steam mass flux presented a sharp decrease with the rising of the air gap size, followed by a stable state, mainly depending on the molecular diffusion and the convection mass transfer.

This research provides a better understanding of the optimum air gap under the protective clothing, which contributes to the design of optimum air gap size that provided higher thermal protection against dry and wet heat exposures.

Purpose – In this chapter, I present a systematic discussion of the relationship between social work (SW) and library and information science (LIS) and explore how SW can contribute to the education of LIS practitioners so that they become more than information facilitators and grow professionally to be true agents of change.

Design/Methodology/Approach – Using engagement with immigrant communities as a case in point and building on the empirical comparative study of public librarians in the Greater Toronto Area and New York City, I outline the current gaps and deficiencies of LIS curricula that can be rectified through blended education. I also integrate the potential contributions of SW into LIS through the case study of an immigrant member of a library community.

Findings – Building on the case study, I introduce a four-tiered model that can be applied to a wide array of courses in LIS programs and conclude with suggestions for taking steps toward blending SW perspectives into the LIS curriculum.

Originality/Value – I position the potential fusion of SW and LIS as “professional blendedness,” which serves as a catalyst for change, and also examine the concept of the blended professional as a change agent. I introduce the rationale for adopting theoretical, practical, and pedagogical approaches from SW in the field of LIS and focus on four specific contributions that can most benefit LIS:

• the person-in-environment approach;

• the strengths perspective and empowerment;

• the interrelated notions of cultural competence, diversity, and intersectionality; and

• the theory-mindedness approach (including theory and practice models).

the person-in-environment approach;

the strengths perspective and empowerment;

the interrelated notions of cultural competence, diversity, and intersectionality; and

the theory-mindedness approach (including theory and practice models).

Examines the effects of directional variations in woven fabric properties on the behaviour of fabrics as they are plied and sewn together to form a seam. This is an important practical consideration, since garment manufacturing frequently involves the sewing of two fabric plies of completely different and constantly changing bias angles — none of which is along the grain line. Examines the variations in the properties of five woven materials, all lightweight and commonly used in women's summer apparel. The Kawabata Evaluation System (KES) was used to measure the mechanical and surface properties of strips, cut at different angles, from the test materials. To investigate the effect of orientation on seam quality, two plies cut from the same fabric but at different angles were sewn together under selected conditions. The resulting seams were characterized for seam quality using AATCC standards.

The purpose of this paper is to provide the details of developments to researchers in test apparatus and evaluation methods to rate the thermal protective performance (TPP) of firefighters’ clothing under high-temperature and high-humidity condition.

This review paper describes the influence laws of moisture on thermal protection and the moisture distribution in actual fire environment. Different evaluation methods used for assessing the effect of moisture on the TPP were investigated, with an emphasis on test devices, evaluation indexes as well as their relationship and limitations.

The moisture from the ambient, clothing and human perspiration plays an important role in determining the TPP of firefighter protective clothing. It is obvious that research on moisture-driven heat transfer in firefighter’s clothing system are comparatively little, primarily focussing on pre-wetted methods of multi-layer fabric. Further studies should be conducted to develop more standardized moistening systems and improve the current calculation methods for evaluating the performance of protective clothing. New explorations for heat and moisture transfer mechanism in protective clothing should be investigated.

Protective clothing is the efficient way to provide fire-fighting occupational safety. To accurately evaluate the TPP of protective clothing under high-temperature and high-humidity condition will help to optimize the clothing performance and choose the proper clothing for providing firefighters with the best protection under multiple thermal hazards.

This paper is offered as a concise reference for scientific community further research in the area of the TPP evaluation methods under high-temperature and high-humidity condition.