Search results

Electric motor heating during biomass recovery and its handling on conveyor is a serious concern for the motor performance. Thus, the purpose of this paper is to design and develop a hardware prototype of master–slave electric motors based biomass conveyor system to use the motors under normal operating conditions without overheating.

The hardware prototype of the system used master–slave electric motors for embedded controller operated robotic arm to automatically replace conveyor motors by one another. A mixed signal based embedded controller (C8051F226DK), fully compliant with IEEE 1149.1 specifications, was used to operate the entire system. A precise temperature measurement of motor with the help of negative temperature coefficient sensor was possible due to the utilization of industry standard temperature controller (N76E003AT20). Also, a pulse width modulation based speed control was achieved for master–slave motors of biomass conveyor.

As compared to conventional energy based mains supply, the system is self-sufficient to extract more energy from solar supply with an energy increase of 11.38%. With respect to conventional energy based \ of 47.31%, solar energy based higher energy saving of 52.69% was reported. Also, the work achieved higher temperature reduction of 34.26% of the motor as compared to previous cooling options.

The proposed technique is free from air, liquid and phase-changing material based cooling materials. As a consequence, the work prevents the wastage of these materials and does not cause the risk of health hazards. Also, the motors are used with their original dimensions without facing any leakage problems.

The purpose of this paper was identification and empirical assessment of the differentiation of consumers' attitudes in Ukraine and Poland to Russian brands and other brands offered on the Russian market after Russia’s aggression against Ukraine on February 24, 2022.

The main research methods include a systematic literature review and the authors' own surveys conducted in November 2022. The research sample comprised 950 consumers – 67% of them were Poles, 30% – Ukrainians and 3% from other countries.

A respondents' country (Poland and Ukraine) does not impact attitudes to brands offered on the Russian market after Russia's invasion of Ukraine on February 24, 2022. Moreover, it does not affect and differentiate emotional engagement in the conflict and assistance to war victims. Cluster analysis resulted in identifying two groups on the basis of consumers' declared emotional reactions to the war. The first group was smaller (N = 353, 37.2%), referred to as “indifferent consumers”, and was characterized by a greater inclination to purchase brands offered in Russia. The other cluster, referred to as “sensitive consumers” (N = 597, 62.8%), comprises those engaged in offering assistance to war victims, showing strong emotions in connection with the aggression and military activities and characterized by a clearly negative attitude to Russian and other offered brands and an inclination to boycott these brands.

A short time horizon, the study confined to two countries, difficulties in reaching Ukrainian respondents due to power failures in Ukraine in the period of conducting the survey (November 2022), a non-representative research sample – overrepresentation of people aged 18–25 years.

The research study contributes to the knowledge about consumer brand attitudes and preferences under unique social, economic and market conditions. These conditions were created by Russia's invasion of Ukraine in 2022, as well as the international and global character of the war in Ukraine. The significant implications of the study refer to brand communication policies and companies' CSR-related declarations. A number of consumers' errors were recorded, resulting from wrong brand retrieval, which were rectified at a later stage as a result of international restrictions imposed on Russia, harsh media criticism and social international embargoes imposed on brands offered in Russia. The marketing communication of contemporary global brands should give consideration to the informative function of CSR activities, and the communication process should be continuous. Critical attitudes and an inclination to boycott brands point to the possible consequences faced by inconsistent and ethically doubtful brand policies. This implication is clearly confirmed by the results of the study.

The authors also wish to highlight the implications for practice and society. As mentioned earlier, Polish consumers involved in providing aid to victims of the war also expressed their opposition to the war by boycotting Russian products and international brands remaining in Russia. Popularization of the research results obtained by the authors can be a form of sensitizing the public to the need for long-term relief, awakening global awareness of the essence and importance of sanctions imposed on Russia, as well as the possibility of expressing opposition through individual purchasing decisions and boycotting brands still present in Russia.

The study allowed for identifying consumers' differentiated brand attitudes in two countries: a country inflicted by war (Ukraine) and a front-line country, strongly supporting Ukraine (Poland). The research contributes to consumer behavior theories and studies of consumer attitudes and preferences from the perspective of international corporations' CSR activities under the unique conditions of war. Also, it contributes to the knowledge of the mechanism of forming attitudes to Russian and international brands offered in Russia among CEE consumers.

A novel method for modelling permanent magnets is investigated based on numerical approximations with rational functions. This study aims to introduce the AAA algorithm and other recently developed, cutting-edge mathematical tools, which provide outstandingly fast and accurate numerical computation of potentials and vector fields.

First, the AAA algorithm is briefly introduced along with its main variants and other advanced mathematical tools involved in the modelling. Then, the analysis of a circular Halbach array with a one-pole pair is carried out by means of the AAA-least squares method, focusing on vector potential and flux density in the bore and validating results by means of classic finite element software. Finally, the investigation is completed by a finite difference analysis.

AAA methods for field analysis prove to be strikingly fast and accurate. Results are in excellent agreement with those provided by the finite element model, and the very good agreement with those from finite differences suggests future improvements. They are also easy programming; the MATLAB code is less than 200 lines. This indicates they can provide an effective tool for rapid analysis.

AAA methods in magnetostatics are novel, but their extension to analogous physical problems seems straightforward. Being a meshless method, it is unlikely that local non-linearities can be considered. An aspect of particular interest, left for future research, is the capability of handling inhomogeneous domains, i.e. solving general interface problems.

The authors use cutting-edge mathematical tools for the modelling of complex physical objects in magnetostatics.

This paper aims to develop a new 3D analytical model in cylindrical coordinates to study radial flux eddy current couplers (RFECC) while considering the magnetic edge and 3D curvature effects, and the field reaction due to the induced currents.

The analytical model is developed by combining two formulations. A magnetic scalar potential formulation in the air and the magnets regions and a current density formulation in the conductive region. The magnetic field and eddy currents expressions are obtained by solving the 3D Maxwell equations in 3D cylindrical coordinates with the variable separation method. The torque expression is derived from the field solution using the Maxwell stress tensor. In addition to 3D magnetic edge effects, the proposed model takes into account the reaction field effect due to the induced currents in the conducting part. To show the accuracy of the developed 3D analytical model, its results are compared to those from the 3D finite element simulation.

The obtained results prove the accuracy of the new developed 3D analytical model. The comparison of the 3D analytical model with the 2D simulation proves the strong magnetic edge effects impact (in the axial direction) in these devices which must be considered in the modelling. The new analytical model allows the magnetic edge effects consideration without any correction factor and also presents a good compromise between precision and computation time.

The proposed 3D analytical model presents a considerably reduced computation time compared to 3D finite element simulation which makes it efficient as an accurate design and optimization tool for radial flux eddy current devices.

A new analytical model in 3D cylindrical coordinates has been developed to find the electromagnetic torque in radial flux eddy current couplers. This model considers the magnetic edge effects, the 3D curvature effects and the field reaction (without correction factors) while improving the computation time.

The purpose of this paper is to present the influence of inter-turn short circuit faults (ITSF) on electromagnetic vibration in high-voltage line-starting permanent magnet synchronous motor (HVLSPMSMS).

In this paper, the ampere–conductor wave model of HVLSPMSM after ITSF is established. Second, a mathematical model of the magnetic field after ITSF is established, and the influence law of the ITSF on the air-gap magnetic field is analyzed. Further, the mathematical expression of the electromagnetic force density is established based on the Maxwell tensor method. The impact of HVLSPMSM torque ripple frequency, radial electromagnetic force spatial–temporal distribution and rotor unbalanced magnetic tension force by ITSF is revealed. Finally, the electromagnetic–mechanical coupling model of HVLSPMSM is established, and the vibration spectra of the motor with different degrees of ITSF are solved by numerical calculation.

In this study, it is found that the 2np order flux density harmonics and (2 N + 1) p order electromagnetic forces are not generated when ITSF occurs in HVLSPMSM.

By analyzing the multi-harmonics of HVLSPMSM after ITSF, this paper provides a reliable method for troubleshooting from the perspective of vibration and torque fluctuation and rotor unbalanced electromagnetic force.

The purpose of this commentary is discuss how musical intervention and imagined interactions can be used to deal with conflict. Music has been called the universal language because of its tonality and rhythm. It affects conflict and aggression and helps people to deal with stress. Research is reviewed showing physiological arousal with background music. The effects of music on aggression are summarized in terms of emotional regulation, catharsis and empathy, and the use of mental imagery in the form of imagined interactions, including relational maintenance catharsis and conflict linkage, is discussed. The incremental sound organizer (ISO) principle of music therapy is discussed as a mechanism to affect emotions while listening to music. Finally, a tool to measure the emotional effect of music on listeners is discussed in terms of the musical mood wheel.

This is a commentary on the effects of background music on reducing aggression.

Music can reduce aggression, depending on how it is used. Music affects how we manage our emotions, reduces stress, provides catharsis and can be a distracting element. Music can enhance empathic feeling; induce positive moods, social bonding, physiological changes and neurobiological changes; and affect our arousal.

Music therapy and musical intervention can be applied to conflict resolution.

The ISO principle of music therapy is designed to deal with changing a person’s emotions as they listen to a medley of music. The mood of the person is measured using a series of scales reflecting a continuum of sadness to happiness, and the music is designed to match the mood of the patient to the music being played and/or listened to, which in turn fosters the achievement of an altered state of consciousness. For example, if you are angry, start with music that is loud and gradually switch to a more tranquil piece of music. “The vectoring power of music is that we change the mood or emotion of persons from one affective pole (joy) to its opposite (anger) through small incremental changes in the rhythm and intensity of the music” (Honeycutt, 2003, p. 82).

Background music in music psychology literature is often referred to as musical intervention. Background music can help us recall positive and negative scenes as the music triggers endorphins in the brain (Salimpoor et al., 2011). Background music is intended to enhance the surrounding context without drawing significant attention. It is often played in spaces such as restaurants, stores, offices or public places to create a certain mood or ambiance.

It is important to note that the effectiveness of musical intervention in reducing aggression can vary based on individual preferences, the specific type of music used, and the context in which it is applied. Additionally, while music intervention can play a role in aggression reduction, it is often most effective when used as part of a comprehensive therapeutic approach.

This study analyses configurations of national culture as boundary conditions of countries’ national systems of innovation (NSI). Drawing from the NSI approach, we argue that culture’s role is that of a contingency factor shaping the relationship between investments in innovation and national innovation outputs.

We assessed the moderation effect of national culture through a systematic, two-stage approach using fuzzy-set Qualitative Comparative Analysis (fsQCA), which allows the analysis of changes induced by the moderator variables. Analyses were conducted with a diverse sample of 61 countries over a period spanning 12 years, from 2011 to 2022.

Findings reveal that investments in innovation, but not individual cultural dimensions, is a necessary condition for high innovation outputs. Furthermore, several configurations of cultural dimensions were identified as moderators of the relationship between investments in innovation and innovation outputs.

This study provides insights into cross-national innovation research by exposing the role of cultural configurations, rather than just individual cultural dimensions, as boundary conditions involved in the achievement of high levels of innovation.

This paper aims to evaluate the role of depositor-specific features in a bank resolution. As the resolution framework in the EU is rather new, there are no empirical studies referring to the efficiency of this mechanism in protecting financial stability. Thus, the authors have checked the role of societal awareness of deposit guarantee schemes and the resolution, as well as the trust in public institutions, in avoiding bank runs in the case of resolution scenarios.

The study is based on telephone interviews conducted with 1,000 Poles, including bank customers whose banks have undergone resolution in recent years, and basic statistics of the resolved banks. The authors then apply two classes of models: binary probit regression and ordered probit regression.

The findings have indicated that the trust in public institutions and the experience gained with age play a key role in overall depositor behaviour. However, for resolutions, declared trust is replaced by case-specific trust based on the obtained information.

The survey is based on a sample of Polish citizens. In the future, international surveys may help diagnose cross-country differences among depositors. Moreover, studies on communication approaches may also support finding highly effective ways to reach various cohorts of depositors.

The existing literature on depositor behaviour in bank failure scenarios has relied on an experimental approach to test various research hypotheses. The research sample is not based on an experiment but on the responses of customers whose banks have actually undergone resolution.

This study aims to introduce and define the concept of phygital brand community (PBC). It discusses the potential conflicts that can arise from engaging in multiple PBCs and propose an enriched netnographic methodological approach to explore the role of PBC engagement overlap and its influence on the phygital experience.

Following a critical analysis of the inherent limitations of netnographic methodological approaches in the context of PBCs, this study develops an enriched netnographic research protocol that accounts for the challenges of engagement overlap among PBCs.

This study proposes two methods of analysis, namely, “participatory netnography” and “witness netnography,” which are derived from a mixed-methodology approach that integrates elements of netnography.

The findings of this study underscore the requisite methodological refinements imperative for enhancing netnographic analysis, particularly in its application for a better comprehension of individual behaviors within the realm of PBCs. In pursuit of this objective, the identified adjustments encompass ethical considerations, evaluation methods and their application in a digital milieu, where intricate mechanics and technologies frequently elude conventional methodologies.

In this study, the authors present a novel conceptualization of PBCs, highlighting their role and development, as well as the challenges they pose. To adequately capture the impact of PBC engagement overlap, the authors propose the need for an enriched mixed-methodological approach.