Search results

This paper aims to investigate how different knitted structures affect the illuminative effect of polymeric optical fibres (POFs).

Knit prototypes were constructed using a 7-gauge industrial hand flat knitting machine. The textile prototype swatches developed in this study tested POF illumination in three types of knitting structures: intervallic knit and float stitch structures; POF inlaid into double plain and full cardigan structures; and double plain and partial knitting structures. The illuminative effects of the POFs in seven prototype swatches were analysed and compared.

It is possible to use an industrial hand flat knitting machine to knit POFs. Longer floats expose more POFs, which boosts illumination but limits the textile’s horizontal stretchability. The openness of the full cardigan structure maximises POF exposure and contributes to even illumination. The partial knitting in different sections achieves the most complete physical integration of POFs into the knitted textiles but constrains the horizontal stretchability of the textiles.

The integration of POFs into knitted textiles provides a functional illuminative effect. Applications include but are not limited to fashion, architecture and interior design.

This study is novel, as it investigates new POF knitted textiles with different loop structures. This study examines how knit stitches affect POFs in intervallic knit and float stitch, inlaid POF double knit, double plain and partial knit and the illuminative effects of the knitted textile.

This study aims to investigate the effect of speckle pattern on displacement measurements using different speckle diameters and coverage ratios.

In order to compare the coverage ratio and speckle diameter during the evaluation of the correlation of digital images (DIC) study, template speckle plates were produced on a computer numerical control (CNC) punch press with 600 punches per minute. After the speckle plates were manufactured, the speckled pattern was randomly painted on a plain white side through the manufactured template plates, and then tensile tests were performed under the same loading conditions for each sample to observe displacement variation via correlation parameters.

During the manufacturing of templates with thin plates, a punch diameter of less than 1.7 mm will cause tool failure; therefore, uniform speckle size can be assessed before operation. A higher coverage ratio resulted in more accurate and reliable results in displacement data. With smaller coverage, the facet size should be increased to achieve favorable results.

If thick template plates are selected, speckle painting cannot be done properly; therefore, template thickness shall also be assessed before operation.

For randomly distributed DIC templates, increasing coverage beyond 50% does not make sense due to difficulties in the production process in the punch press.

Evaluating DIC results via templates manufactured in a punch press with different speckle diameters and coverage ratios is a new topic in literature.

This study aims to facilitate access to vascular disease screening for low-income individuals living in remote and conflict areas based on the results of a pilot trial in Colombia. Also, to increase the amount of diagnosis training of vascular surgery (VS) in civilians.

The operation method includes five stages: strategy development and adjustment; translation of the strategy into a real-world setting; operation logistics planning; strategy analysis and adoption. The operation plan worked efficiently in this study’s sample. It demonstrated high sensibility, efficiency and safety in a real-world setting.

The authors developed and implemented a flow model operating plan for screening vascular pathologies in low-income patients pro bono without proper access to vascular health care. A total of 140 patients from rural areas in Colombia were recruited to a controlled screening session where they underwent serial noninvasive ultrasound assessments conducted by health professionals of different training stages in VS.

The plan was designed to be implemented in remote, conflict areas with limited access to VS care. Vascular injuries are critically important and common among civilians and military forces in regions with active armed conflicts. As this strategy can be modified and adapted to different medical specialties and geographic areas, the authors recommend checking the related legislation and legal aspects of the intended areas where we will implement this tool.

Different sub-specialties can implement the described method to be translated into significant areas of medicine, as the authors can adjust the deployment and execution for the assessment in peripheral areas, conflict zones and other public health crises that require a faster response. This is necessary, as the amount of training to which VS trainees are exposed is low. A simulated exercise offers a novel opportunity to enhance their current diagnostic skills using ultrasound in a controlled environment.

Evaluating and assessing patients with limited access to vascular medicine and other specialties can decrease the burden of vascular disease and related complications and increase the number of treatments available for remote communities.

It is essential to assess the most significant number of patients and treat them according to their triage designation. This management is similar to assessment in remote areas without access to a proper VS consult. The authors were able to determine, classify and redirect to therapeutic interventions the patients with positive findings in remote areas with a fast deployment methodology in VS.

Access to health care is limited due to multiple barriers and the assessment and response, especially in peripheral areas that require a highly skilled team of medical professionals and related equipment. The authors tested a novel mobile assessment tool for remote and conflict areas in a rural zone of Colombia.

This study aimed to compare the performance of sustainable shoes made with bacterial cellulosic composite and commercial leather shoes using an experimental research design. The two specific research objectives were: (1) to examine the basic material properties of multi-layered bacterial cellulosic materials (MBC), which include green tea-based cellulosic (GBC) mats, hemp fabrics, and denim fabrics, in comparison with those of two-layered leathers (MCP) consisting of calf-skin and pig-skin – commonly used in shoe manufacturing; and (2) to explore wearers’ performance in the two types of shoes by assessing quantitative kinematic and kinetic parameters of lower body movements.

This study focused on assessing the basic materials testing and performance of sustainable shoes through a biomechanical approach, in contrast to commercially available leather shoes, through human wear trials. In this study, green tea-based cellulosic (GBC) mats were developed using the optimal combination of ingredients for cellulose growth. Subsequently, the GBC, denim fabric (100% cotton), and 100% hemp fabric were combined to create multi-layered bacterial cellulosic materials (MBC) as an alternative to leather. Additionally, calf-skin and pig-skin leathers were utilized to produce a commercially available two-layered leather (MCP), commonly employed in shoe manufacturing. 37 of the 42 human subjects who participated in wear testing were collected. A paired t-test was conducted to determine whether significant mean differences existed between the two shoe types, a paired t-test was conducted.

To develop a biodegradable and compostable material that could be used as a leather alternative for the footwear industry, we proposed MBC and examined its properties compared with those of MCP, a product often used when making shoes. These findings confirmed the similar properties of MBC and MCP from the material testing and the possibility of using a men’s sustainable shoe prototype as a leather alternative, in terms of kinematics and kinetics.

The new multi-layered bacterial cellulosic materials (MBC) could be an alternative to commercial leathers such as innovative sustainable material construction, advanced design, and advanced techniques to optimize the overall performance of sustainable footwear.

Investigating the integration of smart textile technologies, ergonomic design principles, and personalized customization will contribute to developing MBC and making sustainable shoes using MBC compared with commercial leather shoes. This study provides valuable insights into further refinement and innovation in the sustainable footwear industry.

The purpose of this paper was to investigate how variations in the geometry of silicon chips and the presence of surface defects affect their static bending properties. By comparing the bending radius and strength across differently sized and treated chips, the study sought to understand the underlying mechanics that contribute to the flexibility of silicon-based electronic devices. This understanding is crucial for the development of advanced, robust and adaptable electronic systems that can withstand the rigors of manufacturing and everyday use.

This study explores the impact of silicon chip geometry and surface defects on flexibility through a multifaceted experimental approach. The methodology included preparing silicon chips of three distinct dimensions and subjecting them to thinning processes to achieve a uniform thickness verified via scanning electron microscopy (SEM). Finite element method (FEM) simulations and a series of four-point bending tests were used to analyze the bending flexibility theoretically and experimentally. The approach was comprehensive, examining both the intrinsic geometric factors and the extrinsic influence of surface defects induced by manufacturing processes.

The findings revealed a significant deviation between the theoretical predictions from FEM simulations and the experimental outcomes from the four-point bending tests. Rectangular-shaped chips demonstrated superior flexibility, with smaller dimensions leading to an increased bending strength. Surface defects, identified as critical factors affecting flexibility, were analyzed through SEM and atomic force microscopy, showing that etching processes could reduce defect density and enhance flexibility. Notably, the study concluded that surface defects have a more pronounced impact on silicon chip flexibility than geometric factors, challenging initial assumptions and highlighting the need for defect minimization in chip manufacturing.

This research contributes valuable insights into the design and fabrication of flexible electronic devices, emphasizing the significant role of surface defects over geometric considerations in determining silicon chip flexibility. The originality of the work lies in its holistic approach to dissecting the factors influencing silicon chip flexibility, combining theoretical simulations with practical bending tests and surface defect analysis. The findings underscore the importance of optimizing manufacturing processes to reduce surface defects, thereby paving the way for the creation of more durable and flexible electronic devices for future technologies.

This study aims to examine Victorian primary school parents’ perspectives about a potential school-provided lunch program (LP).

An online cross-sectional survey was conducted in Victoria, Australia, in 2022 to explore parents’ perceptions regarding the lunch menu, funding source, amount willing to pay, frequency of meals and special dietary needs of a school-provided LP.

Over half of parents (57% out of 359) said they would allow their child to participate in a school LP, 34% were unsure and only 9% said they would not. The opportunity for hot cooked lunches at school and the perceived convenience for parents were the top two reasons for favouring such a program. Fifty-eight percent were in favour of hybrid-type funding from both the government and parents. The most preferred amount to pay per meal was AUD5-6 (43%), followed by AUD3-4 (25%). Parents expected meals to be healthy and made from whole food and cater to the special dietary and cultural needs of their children. They also expected enough time to be allocated so children could eat and enjoy the meals.

To the best of the authors’ knowledge, this is the first study to explore Victorian parents’ perceptions regarding the above aspects of a school-provided LP. The findings suggest that parents are receptive to a school-provided LP; they, however, did have several expectations regarding the menu and time for eating. These findings provide important directions for designing future school-provided LPs at primary schools in Australia.

Perspiration and heat are produced by the body and must be eliminated to maintain a stable body temperature. Sweat, heat and air must pass through the fabric to be comfortable. The cloth absorbs sweat and then releases it, allowing the body to chill down. By capillary action, moisture is driven away from fabric pores or sucked out of yarns. Convectional air movement improves sweat drainage, which may aid in body temperature reduction. Clothing reduces the skin's ability to transport heat and moisture to the outside. Excessive moisture makes clothing stick to the skin, whereas excessive heat induces heat stress, making the user uncomfortable. Wet heat loss is significantly more difficult to understand than dry heat loss. The purpose of this study is to provided a good compilation of complete information on wet thermal comfort of textile and technological elements to be consider while constructing protective apparel.

This paper aims to critically review studies on the thermal comfort of textiles in wet conditions and assess the results to guide future research.

Several recent studies focused on wet textiles' impact on comfort. Moisture reduces the fabric's thermal insulation value while also altering its moisture characteristics. Moisture and heat conductivity were linked. Sweat and other factors impact fabric comfort. So, while evaluating a fabric's comfort, consider both external and inside moisture.

The systematic literature review in this research focuses on wet thermal comfort and technological elements to consider while constructing protective apparel.

The purpose of this paper is to develop a prototype of a wearable medical device in the form of a bandage with a real-time data monitoring platform, which can be used domestically for diabetic patients to identify the possibility of foot ulceration at the early stage.

The prototype can measure blood volumetric change and temperature variation in the forefoot area simultaneously. The waveform extracted using a pulsatile-blood-flow signal was used to assess blood perfusion-related information, and hence, predict ischemic ulcers. The temperature difference between ulcerated and the reference was used to predict neuropathic ulcers. The medical device can be used as a bandage during the application wherein the sensory module is placed inside the hollow pocket of the bandage. A platform was developed through a mobile application where doctors can extract real-time information, and hence, determine the possibility of ulceration.

The height of the peaks in the pulsatile-blood-flow signal measured from the subject with foot ischemic ulcers is significantly less than that of the subject without ischemic ulcers. In the presence of ischemic ulcers, the captured waveform flattens. Therefore, the blood perfusion from arteries to the tissue of the forefoot is considerably low for the subject with ischemic ulcers. According to the temperature difference data measured over 25 consecutive days, the temperature difference of the subject with neuropathic ulcers occasionally exceeded the 4 °F range but mostly had higher values closer to the 4 °F range. However, the temperature difference of the subject who had no complications of neuropathic ulcers did not exceed the 4 °F range, and the majority of the measurements occupy a narrow range from −2°F to 2 °F.

The proposed prototype of wearable medical apparatus can monitor both temperature variation and pulsatile-blood-flow signal on the forefoot simultaneously and thereby predict both ischemic and neuropathic diabetes using a single device. Most importantly, the wearable medical device can be used domestically without clinical assistance with a real-time data monitoring platform to predict the possibility of ulceration and the course of action thereof.

While most language departments of the university offer service-learning (SL) subjects based on language teaching, such as “Teaching Chinese as a Second Language in Local Schools” and “Serving the Community through Teaching English,” this paper aims to argue that teaching students to teach language(s) is yet to be the best strategy to serve the service recipients.

SL is widely understood as an experiential learning pedagogy that integrates academic focus, reflection and community service and is shown to be impactful. In Hong Kong, the first university that has made SL a graduation requirement is the Hong Kong Polytechnic University (the University). Considering this, new SL courses have proliferated over the past decade. Adopting a narrative inquiry approach, this paper examines personal narratives from a new SL subject aiming to raise awareness of refugees in Hong Kong. The data includes students’ reflective journals, co-created personal narratives and podcasts and semi-structured interviews.

This paper finds that crafting and recording narratives of shared experiences deepens cultural understanding, cultivates empathy and facilitates language learning in a genuine setting.

Ultimately, this paper advocates a well-designed SL that combines language, content and technology as a powerful, transformational experience for both college students and service recipients.

This paper focuses on a brand new SL course, “Storytelling for Understanding: Refugee Children in Hong Kong,” offered in Semester 1, 2022–2023. The subject was developed by the two authors from a language division affiliated to the University. The deliverables were podcast recordings, co-authored and co-edited by the students and the children.