Search results
1 – 10 of over 4000
Sensor Review publishes the results of a major sensor survey.
Mohd Anwar Zawawi, Sinead O'Keffe and Elfed Lewis
The purpose of this paper is to provide a comparative review of intensity‐modulated fiber optic sensors with non‐optical sensors for health monitoring applications, from the…
Abstract
Purpose
The purpose of this paper is to provide a comparative review of intensity‐modulated fiber optic sensors with non‐optical sensors for health monitoring applications, from the current research activities in the area.
Design/methodology/approach
A range of published research work in sensor design for four different health monitoring applications, including, lumbar spine bending, upper and lower limb motion tracking, respiration and heart rate monitoring, are presented and discussed in terms of their respective advantages and limitations.
Findings
This paper provides information on the various types of sensors applied into the health monitoring area. The sensing techniques of the fiber optic sensor for the stated applications are focused and compared in details to highlight their contributions.
Originality/value
A comparative review of published work is illustrated in an informative table content, to allow a clear idea of the current sensing approaches for health monitoring applications.
Details
Keywords
Radislav Potyrailo and Sergei Golubkov
Achievements in guided wave optics have had a great influence on many areas of technology for several years. Fibre optic communication links, sensors for various parameters…
Abstract
Achievements in guided wave optics have had a great influence on many areas of technology for several years. Fibre optic communication links, sensors for various parameters, recently developed distributed temperature sensors, integrated optical switches, etc. are all applications that are commercially available. The field of analytical chemistry is no exception in this growing technology. In order to compete with well‐established chemical‐sensing instrumentation, optical waveguide chemical sensors (OWCSs) must show all the qualities of such instrumentation. OWCSs combine well‐known features of sensors, based on waveguide optics, with optical methods of chemical analysis and offer advantages over other types of chemical sensor. OWCSs are electrically passive, corrosion‐resistant, can respond to analytes for which other chemical sensors are not available, and referencing can be carried out optically. They allow multicomponent measurements at several wavelengths, have a common technology for fabrication of sensors for different chemical and physical parameters and are easily compatible with telemetry etc. Further, only OWCSs are capable of distributed sensing. However, interference from ambient light, temperature, long‐term instability, relatively slow response time, and limited dynamic range may be a problem for some types of OWCS. These disadvantages can be considerably reduced using various methods.
M. McSherry, C. Fitzpatrick and E. Lewis
There are various temperature measuring systems presented in the literature and on the market today. Over the past number of years a range of luminescent‐based optical fibre…
Abstract
Purpose
There are various temperature measuring systems presented in the literature and on the market today. Over the past number of years a range of luminescent‐based optical fibre sensors have been reported and developed which include fluorescence and optical scattering. These temperature sensors incorporate materials that emit wavelength shifted light when excited by an optical source. The majority of commercially available systems are based on fluorescent properties.Design/methodology/approach – Many published journal articles and conference papers were investigated and existing temperature sensors in the market were examined.Findings – In optical thermometry, the light is used to carry temperature information. In many cases optical fibres are used to transmit and receive this light. Optical fibres are immune to electromagnetic interference and are small in size, which allows them to make very localized measurements. A temperature sensitive material forms a sensor and the subsequent optical data are transmitted via optical fibres to electronic detection systems. Two keys areas were investigated namely fluorescence based temperature sensors and temperature sensors involving optical scattering.Originality/value – An overview of optical fibre temperature sensors based on luminescence is presented. This review provides a summary of optical temperature sensors, old and new which exist in today's world of sensing.
Details
Keywords
Lujun Cui, Huichao Shang, Yan-long Cao and Gao-feng Zhou
Long life and high hydrogen sensitivity are the crucial performance parameters for an optical fiber hydrogen sensing membrane, and these are the fundamental areas of study for an…
Abstract
Purpose
Long life and high hydrogen sensitivity are the crucial performance parameters for an optical fiber hydrogen sensing membrane, and these are the fundamental areas of study for an optical fiber hydrogen sensor. Considering that a traditional optical fiber hydrogen sensor based on pure palladium cannot meet the expectations for long life and rapid sensitivity simultaneously, the experiment in this paper designed a kind of reflective optical fiber bundle hydrogen gas sensor based on a Pd0.75–Ag0.25 alloy to achieve a hydrogen sensing system. This paper aims to discuss the issues with this system.
Design/methodology/approach
A reflective optical fiber bundle hydrogen sensor was made up of an optical fiber bundle and a Pd0.75–Ag0.25 alloy hydrogen membrane. A combination of optical fiber light intensity measurements and the reference calculation method were used to extract the hydrogen concentration information from within the optical fiber, and the relationship between the hydrogen concentration changes and the reflective light intensity in the optical fiber was established.
Findings
The reflective optical fiber bundle hydrogen gas sensor based on a Pd–Ag alloy membrane was shown to provide an effective way to detect hydrogen concentrations. The experimental results showed that a 20-30-nm-thick Pd0.75–Ag0.25 alloy membrane could reach high hydrogen absorption and sensitivity. Key preparation parameters which included sputtering time and substrate temperature were used to prepare the hydrogen membrane during the DC sputtering process, and the reflectivity of the Pd–Ag alloy membrane was enough to meet the requirements of long life and high hydrogen sensitivity for the optical fiber hydrogen sensor.
Originality/value
This paper seeks to establish a foundation for optimizing and testing the performance of the Pd–Ag alloy hydrogen sensing membrane for an optical fiber bundle hydrogen sensor. To this end, the optimal thickness and key preparation parameters for the Pd–Ag alloy hydrogen sensing membrane were discussed. The results of this research have proved that the reflective optical fiber hydrogen sensor based on a Pd0.75–Ag0.25 alloy is an effective approach and precisely enough for hydrogen gas monitoring in practical engineering measurements.
Details
Keywords
Optical fibre sensors are finding wide applications in biotechnology and medicine, as a European specialist explains.
Roger Main gives a four‐part report on the optical technologies which are playing an increasingly important role in sensor development.
Qijing Lin, Zirong Wu, Na Zhao, Zhuangde Jiang, Qidong Zhang, Bian Tian and Peng Shi
The Fabry-Perot sapphire optical fiber sensor is an excellent choice for high-temperature sensing in civil and military fields, such as oil exploitation, engine and turbine. The…
Abstract
Purpose
The Fabry-Perot sapphire optical fiber sensor is an excellent choice for high-temperature sensing in civil and military fields, such as oil exploitation, engine and turbine. The purpose of this paper is to study the high-reflective film system withstanding high temperature in Fabry-Perot sapphire optical fiber high-temperature sensor. To improve the performance of the sensor and reduce the difficulty of signal acquisition, one of the key ways is to enhance the normalized light intensity of F-P sensor, which can be achieved by coating the high-reflective film system on the fiber end.
Design/methodology/approach
The high-reflective film system can be achieved by a multilayer film with alternating ZrO2 and Al2O3 film layers whose refractive indexes are different. In addition, the optimum film alternating sequences and the influence of the number of film layers, incident angle and temperature should be obtained by numerical analysis.
Findings
With the increase of the number of film layers, the reflectivity rises gradually and the change trend is more and more gentle. A minimum of the spectral reflectivity will occur at a certain incident angle depending on the design of the periodic multilayer system. Temperature affects the reflectivity of high-reflective film system. The normalized light intensity of the F-P sensor coated with high-reflective film system enhances greatly which is helpful to the signal demodulation. The temperature response of the F-P sensor is mainly determined by the characteristics of the F-P cavity.
Originality/value
Higher reflectivity, lower cost and easy signal acquisition are the most important features of the introduced high-reflective film system for the Fabry-Perot sapphire optical fiber high-temperature sensor.
Details
Keywords
Adel Abdallah, Mohamed M. Fouad and Hesham N. Ahmed
The purpose of this paper is to introduce a novel intensity-modulated fiber optic sensor for real-time intrusion detection using a fiber-optic microbend sensor and an optical…
Abstract
Purpose
The purpose of this paper is to introduce a novel intensity-modulated fiber optic sensor for real-time intrusion detection using a fiber-optic microbend sensor and an optical time-domain reflectometer (OTDR).
Design/methodology/approach
The proposed system is tested using different scenarios using person/car as intruders. Experiments are conducted in the lab and in the field. In the beginning, the OTDR trace is obtained and recorded as a reference signal without intrusion events. The second step is to capture the OTDR trace with intrusion events in one or multiple sectors. This measured signal is then compared to the reference signal and processed by matrix laboratory to determine the intruded sector. Information of the intrusion is displayed on an interactive screen implemented by Visual basic. The deformer is designed and implemented using SOLIDWORKS three-dimensional computer aided design Software.
Findings
The system is tested for intrusions by performing two experiments. The first experiment is performed for both persons (>50 kg) in the lab and cars in an open field with a car moving at 60 km/h using two optical fiber sectors of lengths 200 and 500 m. For test purposes, the deformer length used in the experiment is 2 m. The used signal processing technique in the first experiment has some limitations and its accuracy is 70% after measuring and recording 100 observations. To overcome these limitations, a second experiment with another technique of signal processing is performed.
Research limitations/implications
The system can perfectly display consecutive intrusions of the sectors, but in case of simultaneous intrusions of different sectors, which is difficult to take place in real situations, there will be the ambiguity of the number of intruders and the intruded sector. This will be addressed in future work. Suitable and stable laser power is required to get a suitable level of backscattered power. Optimization of the deformer is required to enhance the sensitivity and reliability of the sensor.
Practical implications
The proposed work enables us to benefit from the ease of implementation and the reduced cost of the intensity-modulated fiber optic sensors because it overcomes the constraints that prevent using the intensity-modulated fiber optic sensors for intrusion detection.
Originality/value
The proposed system is the first time long-range intensity-modulated fiber optic sensor for intrusion detection.
Details
Keywords
It is important to monitor wrist four direction movements (flexion, extension, adduction and abduction) for hand healthcare, wrist rehabilitation and upper limb exercise, and so…
Abstract
Purpose
It is important to monitor wrist four direction movements (flexion, extension, adduction and abduction) for hand healthcare, wrist rehabilitation and upper limb exercise, and so on. The purpose of this study is to develop a quadri-directional optical bending sensor that integrated wearable device technology in a smart glove to detect wrist four direction movements.
Design/methodology/approach
The quadri-directional optical bending sensor was designed with a microcontroller board, a Bluetooth wireless module, a side-emitting polymeric optical fibre (POF), an infrared light emitting diode and four phototransistors. A linear equation was deduced to calculate bending angle from detecting sensor value of Arduino microcontroller. The bending angle values could be seen by the smartphone screen, so the system has a good human–machine interface function.
Findings
The light emission by macro-bending of the side-emitting POFs that the transmittance of the outer side is greater than the inner. The bending POFs lateral emission phenomenon integrated with phototransistors on the edge is suitable for the development of bending sensors.
Originality/value
This study is to develop a novel quadri-directional optical bending sensor to replace two bi-direction sensors or four uni-direction sensors for wrist four direction movements monitoring.
Details