Search results

Long life and high hydrogen sensitivity are the crucial performance parameters for an optical fiber hydrogen sensing membrane, and these are the fundamental areas of study for an optical fiber hydrogen sensor. Considering that a traditional optical fiber hydrogen sensor based on pure palladium cannot meet the expectations for long life and rapid sensitivity simultaneously, the experiment in this paper designed a kind of reflective optical fiber bundle hydrogen gas sensor based on a Pd_0.75–Ag_0.25 alloy to achieve a hydrogen sensing system. This paper aims to discuss the issues with this system.

A reflective optical fiber bundle hydrogen sensor was made up of an optical fiber bundle and a Pd_0.75–Ag_0.25 alloy hydrogen membrane. A combination of optical fiber light intensity measurements and the reference calculation method were used to extract the hydrogen concentration information from within the optical fiber, and the relationship between the hydrogen concentration changes and the reflective light intensity in the optical fiber was established.

The reflective optical fiber bundle hydrogen gas sensor based on a Pd–Ag alloy membrane was shown to provide an effective way to detect hydrogen concentrations. The experimental results showed that a 20-30-nm-thick Pd_0.75–Ag_0.25 alloy membrane could reach high hydrogen absorption and sensitivity. Key preparation parameters which included sputtering time and substrate temperature were used to prepare the hydrogen membrane during the DC sputtering process, and the reflectivity of the Pd–Ag alloy membrane was enough to meet the requirements of long life and high hydrogen sensitivity for the optical fiber hydrogen sensor.

This paper seeks to establish a foundation for optimizing and testing the performance of the Pd–Ag alloy hydrogen sensing membrane for an optical fiber bundle hydrogen sensor. To this end, the optimal thickness and key preparation parameters for the Pd–Ag alloy hydrogen sensing membrane were discussed. The results of this research have proved that the reflective optical fiber hydrogen sensor based on a Pd_0.75–Ag_0.25 alloy is an effective approach and precisely enough for hydrogen gas monitoring in practical engineering measurements.

At present, one of the key equipment in pillar industries is a large rotating machinery. Conducting regular health monitoring is important for ensuring safe operation of the large rotating machinery. Because vibrations sensors play an important role in the workings of the rotating machinery, measuring its vibration signal is an important task in health monitoring. This paper aims to present these.

In this work, the contact vibration sensor and the non-contact vibration sensor have been discussed. These sensors consist of two types: the electric vibration sensor and the optical fiber vibration sensor. Their applications in the large rotating machinery for the purpose of health monitoring are summarized, and their advantages and disadvantages are also presented.

Compared with the electric vibration sensor, the optical fiber vibration sensor of large rotating machinery has unique advantages in health monitoring, such as provision of immunity against electromagnetic interference, requirement of less insulation and provision of long-distance signal transmission.

Both contact vibration sensor and non-contact vibration sensor have been discussed. Among them, the electric vibration sensor and the optical fiber vibration sensor are compared. Future research direction of the vibration sensors is presented.

The Fabry-Perot sapphire optical fiber sensor is an excellent choice for high-temperature sensing in civil and military fields, such as oil exploitation, engine and turbine. The purpose of this paper is to study the high-reflective film system withstanding high temperature in Fabry-Perot sapphire optical fiber high-temperature sensor. To improve the performance of the sensor and reduce the difficulty of signal acquisition, one of the key ways is to enhance the normalized light intensity of F-P sensor, which can be achieved by coating the high-reflective film system on the fiber end.

The high-reflective film system can be achieved by a multilayer film with alternating ZrO₂ and Al₂O₃ film layers whose refractive indexes are different. In addition, the optimum film alternating sequences and the influence of the number of film layers, incident angle and temperature should be obtained by numerical analysis.

With the increase of the number of film layers, the reflectivity rises gradually and the change trend is more and more gentle. A minimum of the spectral reflectivity will occur at a certain incident angle depending on the design of the periodic multilayer system. Temperature affects the reflectivity of high-reflective film system. The normalized light intensity of the F-P sensor coated with high-reflective film system enhances greatly which is helpful to the signal demodulation. The temperature response of the F-P sensor is mainly determined by the characteristics of the F-P cavity.

Higher reflectivity, lower cost and easy signal acquisition are the most important features of the introduced high-reflective film system for the Fabry-Perot sapphire optical fiber high-temperature sensor.

Owing to the technology growth, especially in Microsystems technology and Nanotechnology, new products will provide new ways to sense variables that are crucial for product improvement and system reliability. A big concern of the scientific community is the measurement of low level flow measurements, especially for the biomedical and/or systems on a chip approaches.Design/methodology/approach – A new flow meter concept design consists of a surface micromachined sensor having an optical high reflective mirror made of gold, which is attached to unique cantilever designs that bend due to the drag force of mass flow. The bending of the cantilevers produces the mirror to approach/depart from an optical fiber end‐tip. The reflective light to fiber is modulated using a Fabry‐Perot interferometry technique to determine the mirror separation to the fiber, which corresponds to the mass flow.Findings – The new concept design shows a big potential approach to measure low flow measurements for air, gas and liquids of low viscosity. The results of this concept, through finite element analysis, show that the material used to build the sensor, makes them excellent candidates for fabrication. The stresses of the materials and allowable (readable) bending are among the tolerances of such materials/construction‐design. The sensor is not affected by electromagnetic interference and does not require electrical currents to sense, i.e. it is perfectly suited for biomedical and low mass‐flow sensing such as lab‐on‐chip applications.Originality/value – Among all approaches to sense low flow measurements, most of them need either “big” turbine approaches (dimensions over 1 cm diameter), or the need of an electrical approach needed in the end measurement sensor. This work proposes a non‐electrical approach.

The purpose of this paper is to provide a comparative review of intensity‐modulated fiber optic sensors with non‐optical sensors for health monitoring applications, from the current research activities in the area.

A range of published research work in sensor design for four different health monitoring applications, including, lumbar spine bending, upper and lower limb motion tracking, respiration and heart rate monitoring, are presented and discussed in terms of their respective advantages and limitations.

This paper provides information on the various types of sensors applied into the health monitoring area. The sensing techniques of the fiber optic sensor for the stated applications are focused and compared in details to highlight their contributions.

A comparative review of published work is illustrated in an informative table content, to allow a clear idea of the current sensing approaches for health monitoring applications.

Integration of lasers and fibre optics into robotic systems provides new opportunities in sensing and material processing. Increased productivity and application of robots in hostile environments are other possibilities.

With the increasing development of the surgical robots, the opto-mechatronic technologies are more potential in the robotics system optimization. The optic signal plays an important role in opto-mechatronic systems. This paper aims to present a review of the research status on fiber-optic-based force and shape sensors in surgical robots.

Advances of fiber-optic-based force and shape sensing techniques in the past 20 years are investigated and summarized according to different surgical requirement and technical characteristics. The research status analysis and development prospects are discussed.

Compared with traditional electrical signal conduction, the phototransduction provides higher speed transmission, lower signal loss and the immunity to electromagnetic interference in robot perception. Most importantly, more and more advanced optic-based sensing technologies are applied to medical robots in the past two decades because the prominence is magnetic resonance imaging compatibility. For medical robots especially, fiber-optic sensing technologies can improve working security, manipulating accuracy and provide force and shape feedback to surgeon.

This is a new perspective. This paper mainly researches the application of optical fiber sensor according to different surgeries which is beneficial to learn the great potential of optical fiber sensor in surgical robots. By enumerating the research progress of medical robots in optimization design, multimode sensing and advanced materials, the development tendency of fiber-optic-based force and shape sensing technologies in surgical robots is prospected.

Achievements in guided wave optics have had a great influence on many areas of technology for several years. Fibre optic communication links, sensors for various parameters, recently developed distributed temperature sensors, integrated optical switches, etc. are all applications that are commercially available. The field of analytical chemistry is no exception in this growing technology. In order to compete with well‐established chemical‐sensing instrumentation, optical waveguide chemical sensors (OWCSs) must show all the qualities of such instrumentation. OWCSs combine well‐known features of sensors, based on waveguide optics, with optical methods of chemical analysis and offer advantages over other types of chemical sensor. OWCSs are electrically passive, corrosion‐resistant, can respond to analytes for which other chemical sensors are not available, and referencing can be carried out optically. They allow multicomponent measurements at several wavelengths, have a common technology for fabrication of sensors for different chemical and physical parameters and are easily compatible with telemetry etc. Further, only OWCSs are capable of distributed sensing. However, interference from ambient light, temperature, long‐term instability, relatively slow response time, and limited dynamic range may be a problem for some types of OWCS. These disadvantages can be considerably reduced using various methods.

The purpose of this paper is to introduce a novel intensity-modulated fiber optic sensor for real-time intrusion detection using a fiber-optic microbend sensor and an optical time-domain reflectometer (OTDR).

The proposed system is tested using different scenarios using person/car as intruders. Experiments are conducted in the lab and in the field. In the beginning, the OTDR trace is obtained and recorded as a reference signal without intrusion events. The second step is to capture the OTDR trace with intrusion events in one or multiple sectors. This measured signal is then compared to the reference signal and processed by matrix laboratory to determine the intruded sector. Information of the intrusion is displayed on an interactive screen implemented by Visual basic. The deformer is designed and implemented using SOLIDWORKS three-dimensional computer aided design Software.

The system is tested for intrusions by performing two experiments. The first experiment is performed for both persons (>50 kg) in the lab and cars in an open field with a car moving at 60 km/h using two optical fiber sectors of lengths 200 and 500 m. For test purposes, the deformer length used in the experiment is 2 m. The used signal processing technique in the first experiment has some limitations and its accuracy is 70% after measuring and recording 100 observations. To overcome these limitations, a second experiment with another technique of signal processing is performed.

The system can perfectly display consecutive intrusions of the sectors, but in case of simultaneous intrusions of different sectors, which is difficult to take place in real situations, there will be the ambiguity of the number of intruders and the intruded sector. This will be addressed in future work. Suitable and stable laser power is required to get a suitable level of backscattered power. Optimization of the deformer is required to enhance the sensitivity and reliability of the sensor.

The proposed work enables us to benefit from the ease of implementation and the reduced cost of the intensity-modulated fiber optic sensors because it overcomes the constraints that prevent using the intensity-modulated fiber optic sensors for intrusion detection.

The proposed system is the first time long-range intensity-modulated fiber optic sensor for intrusion detection.

The purpose of this article is to suggest that Fraby‐Perot optic sensor is a practical measurement gage to monitor the strain of great structures such as railway bridges.

A remote strain monitoring system based on F‐P optic fiber and virtual instrument is designed to monitor the strains of a railway bridge.

The application results show that the Fraby‐Perot optical fiber sensors can accurately measure strain and they are suitable for the long‐term and automatic monitoring. In addition, the system has several advantages over conventional structural instruments including fast response, ability of both static and dynamic monitoring, absolute measurement, immunity to interferences such as lightning strikes, electromagnetic noise and radio frequency, low attenuation of light signals in long fiber optic cables.

Health monitoring of structures is getting more and more recognition all over the world because it can minimize the cost of reparation and maintenance and ensure the safety of structures. A strain monitoring system based on F‐P optic fiber sensor was developed according to the health monitoring requirements of Wuhu Yangtze River Railway Bridge, which is the first cable‐stayed bridge with a maximum span of 312 m carrying both railway and highway traffic in China. It has run stably in the monitoring field more than two years and fulfilled the monitoring requirement very well. Now the system has been transplanted successfully to the Zhengzhou Yellow Railway Bridge for strain monitoring. So the work can be referenced by other similar health monitoring projects.

Long‐term, real‐time monitoring of strain using FP fiber optic sensors in railway bridge is an innovation. A remote strain data acquisition and real‐time processing are another character of the system. The work studied can be referenced by other structures monitoring, such as tunnel, concrete bridges, concrete and earth dams.