Search results

The purpose of this paper is to investigate the effect of the replacement of natural coarse aggregate (NCA) with different percentages of recycled coarse aggregate (RCA) on properties of low calcium fly ash (FA)-based geopolymer concrete (GPC) cured at oven temperature. Further, this paper aims to study the effect of partial replacement of FA by ground granulated blast slag (GGBS) in GPC made with both NCA and RCA cured under ambient temperature curing.

M25 grade of ordinary Portland cement (OPC) concrete was designed according to IS: 10262-2019 with 100% NCA as control concrete. Since no standard guidelines are available in the literature for GPC, the same mix proportion was adopted for the GPC by replacing the OPC with 100% FA and W/C ratio by alkalinity/binder ratio. All FA-based GPC mixes were prepared with 12 M of sodium hydroxide (NaOH) and an alkalinity ratio, i.e. sodium hydroxide to sodium silicate (NaOH:Na₂SiO₃) of 1:1.5, subjected to 90^°C temperature for 48 h of curing. The NCA were replaced with 50% and 100% RCA in both OPC and GPC mixes. Further, FA was partially replaced with 15% GGBS in GPC made with the above percentages of NCA and RCA, and they were given ambient temperature curing with the same molarity of NaOH and alkalinity ratio.

The workability, compressive strength, split tensile strength, flexural strength, water absorption, density, volume of voids and rebound hammer value of all the mixes were studied. Further, the relationship between compressive strength and other mechanical properties of GPC mixes were established and compared with the well-established relationships available for conventional concrete. From the experimental results, it is found that the compressive strength of GPC under ambient curing condition at 28 days with 100% NCA, 50% RCA and 100% RCA were, respectively, 14.8%, 12.85% and 17.76% higher than those of OPC concrete. Further, it is found that 85% FA and 15% GGBS-based GPC with RCA under ambient curing shown superior performance than OPC concrete and FA-based GPC cured under oven curing.

The scope of the present paper is limited to replace the FA by 15% GGBS. Further, only 50% and 100% RCA are used in place of natural aggregate. However, in future study, the replacement of FA by different amounts of GGBS (20%, 25%, 30% and 35%) may be tried to decide the optimum utilisation of GGBS so that the applications of GPC can be widely used in cast in situ applications, i.e. under ambient curing condition. Further, in the present study, the natural aggregate is replaced with only 50% and 100% RCA in GPC. However, further investigations may be carried out by considering different percentages between 50 and 100 with the optimum compositions of FA and GGBS to enhance the use of RCA in GPC applications. The present study is further limited to only the mechanical properties and a few other properties of GPC. For wider use of GPC under ambient curing conditions, the structural performance of GPC needs to be understood. Therefore, the structural performance of GPC subjected to different loadings under ambient curing with RCA to be investigated in future study.

The replacement percentage of natural aggregate by RCA may be further enhanced to 50% in GPC under ambient curing condition without compromising on the mechanical properties of concrete. This may be a good alternative for OPC and natural aggregate to reduce pollution and leads sustainability in the construction.

This study aims to investigate a mediation model in which generative learning positively affects marketing innovation and both organizational control and relationship openness mediate the relationship between learning intent and generative learning of international joint ventures (IJVs) in emerging markets. We also decipher the degree of necessity of these factors for generative learning and of generative learning for marketing innovation.

A sample of 181 marketing managers of IJVs in Vietnam, an emerging market, was surveyed to collect data. Partial least squares structural equation modeling (PLS-SEM) was employed to test the net effect, and necessary condition analysis (NCA) was used to decipher the degree of necessity.

The PLS-SEM results demonstrate that the effect of learning intent on generative learning is fully mediated by organizational control and relationship openness, which in turn leads to marketing innovation. The NCA findings reveal that all three factors, namely learning intent, organizational control and relationship openness, serve as necessary conditions for generative learning. However, generative learning does not play the role of a necessary condition for marketing innovation.

The study findings suggest that IJVs in emerging markets should pay attention not only to the net effects of those factors but also to their degrees of necessity for generative learning in order to achieve marketing innovation.

The study contributes to the literature by confirming the mediating roles of organizational control and relationship openness in the relationship between learning intent and generative learning. Furthermore, it is among the first to decipher the degrees of necessity of these factors for generative learning and of generative learning for the marketing innovation of IJVs in emerging markets.

This study aims to elaborate on the antecedents of muzakki (zakat payers) paying zakat (Islamic philanthropy) through institutions with social media arrangements, while the drivers of social media engagement are used in the conceptual model with trust and intention.

Overall, the final sample of 230 respondents was obtained through the database of official zakat management institutions. Regarding analytical tools, this study combines the partial least square structural equation modelling and necessary condition analysis approaches to explore research findings.

The findings show that firm-generated information and trust play an important role directly and indirectly. At the same time, other constructions, such as social factors and user-based factors, provide variations in necessary conditions to increase the muzakki’s intention to channel their zakat through institutions.

Zakat institutions must focus on improving social media-based services by integrating important information, such as credibility and transparency, with muzakki’s preferences. Additionally, zakat information on social media must be attractively packaged and contain facilities that muzakki can use in communicating, such as; their opinions, suggestions and input. The findings, in general, underscore the attachment between muzakki and zakat institutions through social media, which can significantly impact the positive environment of zakat institutions.

To the author’s knowledge, this study is pioneering in conceptualizing and testing a theoretical model linking drivers of social media engagement, trust and intention to pay zakat through the institution, particularly in the levels of necessity.

This research paper aims to explore the concerns and determinants of travelers’ behavior toward ChatGPT in the hospitality and tourism context. It also examines the weight of risk factors versus that of motivation and innovation characteristics influencing travelers’ approach behaviors toward ChatGPT.

A cumulative prospect theory was used to determine travelers’ responses to ChatGPT. This study, using a fuzzy-set qualitative approach, explored risk, motivation and innovation factors as determinants of approach behaviors for ChatGPT.

Findings revealed that risk, motivation and innovation factors were the key triggers of approach behaviors for ChatGPT. An intricate combination effect of the perceived risk, motivation and innovation characteristics was found, and the necessary predictors were determined.

The findings of this study will expand our current knowledge and offer practical insights for the development of ChatGPT in the hospitality and tourism sector.

This study makes a significant contribution to the existing literature by providing a nuanced understanding of the intricate interplay between the various factors that shape customer behavior in the context of technology adoption in hospitality and tourism studies.

Entrepreneurs are generally considered to be committed in order to strive for highly desirable goals, such as growth or commercial success. However, commitment is a multidimensional concept and may have asymmetric relationships with positive or negative entrepreneurial outcomes. This paper aims to provide a nuanced perspective to show under what conditions commitment may be detrimental for entrepreneurs and lead to overinvestment.

Using a sample of entrepreneurs from incubators in France (N = 437), this study employs a configurational perspective, fuzzy-set qualitative comparative analysis (fsQCA), to identify which commitment profiles lead entrepreneurs to overinvest different resources in their entrepreneurial projects.

The paper exposes combinations of conditions that lead to overinvestment and identifies five different commitment profiles: an “Affective profile”, a “Project committed profile”, a “Profession committed profile”, an “Instrumental profile”, and an “Affective project profile”.

The results show that affective commitment is a necessary condition for entrepreneurs to conduct overinvesting behaviors. This complements previous linear research on the interdependence between affect and commitment in fostering detrimental outcomes for nascent entrepreneurs.

The purpose of this paper is to present findings on a community-based participatory research project where the authors examined access and ability to use technology, attitudes and perceptions of technology, and COVID-19 and mental health beliefs in the time of COVID-19, among predominantly Hispanic/Latinx farmworker males residing in the US–Mexico border city of El Paso, Texas.

This paper used a qualitative narrative analysis which consisted of in-person interviews in Spanish with male farmworkers (n = 10) between the ages of 49–60 years. This paper applied a research approach designed to engage researchers and community stakeholders as equal partners with the goal of improving practice.

Of the participants, eight reported having a phone and only three reported knowing how to use the internet. Before the COVID-19 pandemic, the participants reported living a relatively stress-free life. When the pandemic impacted their community, they reported experiencing heightened anxiety and stress. To relieve stress, all participants used healthy coping strategies (e.g. walking and gardening).

The findings suggest that farmworker males are receptive to obtaining mental health services. In addition, they would benefit from resources highlighting healthy stress coping mechanisms. Due to their limited knowledge of current internet technology, efforts on how to promote and deliver mental health services and resources to farmworkers should be strategic and appropriate.

Social commerce (s-commerce) has gained widespread popularity as a social platform where customers engage in resource-sharing activities such as information exchange, advice-seeking and expressing their opinions on mutual interests. However, existing studies have not fully comprehended the drivers of electronic customer-to-customer interaction (eCCI) and how such behavior contributes to the customer “stick” on s-commerce sites. This study develops the Motivation–Opportunity–Ability (MOA) theory and investigates the impact of MOA factors on eCCI, which in turn affects customer stickiness.

A survey was used to acquire data from 455 valid respondents, and the research employed a combination of fuzzy-set qualitative comparative analysis (fsQCA) and structural equation modeling.

The results revealed associations between perceived self-efficacy, intrinsic motivation, tie strength with other customers, eCCI and customer stickiness.

Considering the limited availability of complete eCCI frameworks in existing scholarly works, the authors present valuable perspectives on the role of consumer characteristics as both antecedents and consequences of eCCI. Additionally, this study proposes a research agenda for the field of eCCI on s-commerce sites.