Search results

The purpose of this paper is to investigate advantages of multiphase permanent magnet synchronous motors (PMSM) with fractional slot concentrated windings (FSCW). The investigation is based on comparative analysis and assessment of FSCW PMSM wound as 3, 6, 9 and 12 phase machines suited for low speed applications.

The investigations are focussed on distortions of back electromotive (emf) and magnetomotive force (mmf) with the torque ripples and motors’ performance taken into account. The finite element models with the aid of customized computer code have been adopted for motor winding design and back emf, mmf and motor performance analyses.

The novel multiphase winding layouts were found to offer lower content of sub-harmonics in the mmf waveforms compared with the traditional three-phase machine designs. Moreover, the investigated multiphase machines exhibited higher average value of the electromagnetic torque, while the multiphase PMSM machines with FSCW were further characterized by significantly lower torque pulsations.

The analyses presented in this paper demonstrate that PMSM with FSCW are advantageous to their counterpart three-phase machines. Specifically, they offer higher performance and are more suitable to work with multiple drives supplying segmented winding system. This ability of using multi-drive supply for one motor offers flexibility and cost reduction while increasing fault tolerant power train system.

The purpose of this paper is to investigate a five-phase permanent-magnet synchronous machine (PMSM) that features high-power density and high-fault-tolerant capability for electric vehicles (EVs).

The five-phase 20-slot/18-pole PMSM is designed by finite-element method. Two typical rotor structures which include Halbach array and rotor eccentricity are compared to achieve sinusoidal back electromotive force (EMF). The influence of slot dimensions on leakage inductance and short-circuit current is analyzed. The method to reduce eddy current loss of permanent magnets (PMs) is investigated. The machine performances under both healthy and fault conditions are evaluated. Finally, thermal behavior of the machine is studied by Ansys.

With both no-load and load performances considered, rotor eccentricity is proposed to reduce the harmonic contents of EMF. Increasing slot leakage inductance is an effective way to limit the short-circuit current. By segmenting PMs in circumferential direction, the PM eddy current loss is reduced and the machine efficiency is improved. With proper fault-tolerant control strategy, acceptable torque performance can be achieved under fault conditions. The proposed machine can safely operate under Class F insulation.

So far, many researches focus on multiphase PMSMs used in aviation fields, such as fuel pump and electric actuator. Differing from PMSMs used in aviation applications, machines for EVs require characteristics like wide speed ranges and variable operating conditions. Hence, this paper proposes a five-phase 20-slot/18-pole PMSM for EVs. The proposed design methodology is applicable to multiphase PMSMs with different slot/pole combinations.

The purpose of this paper is to analyse and compare the functional parameters of three- and six-phase permanent magnet synchronous motors (PMSM) with fractional-slot concentrated windings (FSCW).

The investigations are focused on the comparison of the distortions of back electromotive force (emf) and magnetomotive force (mmf) waveforms, as well as torque ripples, radial force spatial harmonics and motor performance studies. The finite element models of the test machine and a personally developed computer code have been used to calculate motor characteristics and analyse and synthesise multiphase winding layouts, respectively.

Compared with the traditional three-phase PMSM designs, the proposed six-phase machines are characterized by a significantly lower content of sub-harmonics in mmf waveform distribution. Moreover, the investigated six-phase machines exhibited a higher average value of electromagnetic torque, significantly lower torque ripples and a reduced value of low-order harmonics of the radial component of the electromagnetic force in the air-gap of the machine.

The analyses presented in this paper show that six-phase PMSM with FSCWs are advantageous to their counterpart three-phase machines. Specifically, they are more suited to working with multiple drives supplying a segmented winding system while simultaneously offering higher performance. This suitability to the use of a multi-drive supply for one motor offers flexibility and cost reduction while increasing the fault tolerance of a power train system.

Wind energy has matured to a level of development at which it is ready to become a generally accepted power generation technology. The aim of this paper is to provide a brief review of the state of the art in the area of electrical machines and power‐electronic systems for high‐power wind energy generation applications. As the first part of this paper, latest market penetration, current technology and advanced electrical machines are addressed.

After a short description of the latest market penetration of wind turbines with various topologies globally by the end of 2010 is provided, current wind power technology, including a variety of fixed‐ and variable‐speed (in particular with doubly‐fed induction generator (DFIG) and permanent magnet synchronous generator (PMSG) supplied with partial‐ and full‐power converters, respectively) wind power generation systems, and modern grid codes, is presented. Finally, four advanced electrical‐machine systems, viz., brushless DFIG, open winding PMSG, dual/multi 3‐phase stator‐winding PMSG and magnetic‐gear outer‐rotor PMSG, are identified with their respective merits and challenges for future high‐power wind energy applications.

For the time being, the gear‐drive DFIG‐based wind turbine is significantly dominating the markets despite its defect caused by mechanical gears, slip rings and brush sets. Meanwhile, direct‐drive synchronous generator, especially utilizing permanent magnets on its rotor, supplied with a full‐capacity power converter has become a more effective solution, particularly in high‐power offshore wind farm applications.

This first part of the paper reviews the latest market penetration of wind turbines with a variety of mature topologies, by summarizing their advantages and disadvantages. Four advanced electrical‐machine systems are selected and identified by distinguishing their respective merits and challenges for future high‐power wind energy applications.

The purpose of this paper is to apply some surrogate-assisted optimization techniques in order to improve the performances of a five-phase permanent magnet machine in the context of a complex model requiring computation time.

An optimal control of four independent currents is proposed in order to minimize the total losses with the respect of functioning constraints. Moreover, some geometrical parameters are added to the optimization process allowing a co-design between control and dimensioning.

The optimization results prove the remarkable effect of using the freedom degree offered by a five-phase structure on iron and magnets losses. The performances of the five-phase machine with concentrated windings are notably improved at high speed (16,000 rpm).

The effectiveness of the method allows solving the challenge which consists in taking into account inside the control strategy the eddy-current losses in magnets and iron. In fact, magnet losses are a critical point to protect the machine from demagnetization in flux-weakening region.

The purpose of this article is to treat the nonlinear optimal control problem in EV traction systems which are based on 5-phase induction motors. Five-phase permanent magnet synchronous motors and five-phase asynchronous induction motors (IMs) are among the types of multiphase motors one can consider for the traction system of electric vehicles (EVs). By distributing the required power in a large number of phases, the power load of each individual phase is reduced. The cumulative rates of power in multiphase machines can be raised without stressing the connected converters. Multiphase motors are also fault tolerant because such machines remain functional even if failures affect certain phases.

A novel nonlinear optimal control approach has been developed for five-phase IMs. The dynamic model of the five-phase IM undergoes approximate linearization using Taylor series expansion and the computation of the associated Jacobian matrices. The linearization takes place at each sampling instance. For the linearized model of the motor, an H-infinity feedback controller is designed. This controller achieves the solution of the optimal control problem under model uncertainty and disturbances.

To select the feedback gains of the nonlinear optimal (H-infinity) controller, an algebraic Riccati equation has to be solved repetitively at each time-step of the control method. The global stability properties of the control loop are demonstrated through Lyapunov analysis. Under moderate conditions, the global asymptotic stability properties of the control scheme are proven. The proposed nonlinear optimal control method achieves fast and accurate tracking of reference setpoints under moderate variations of the control inputs.

Comparing to other nonlinear control methods that one could have considered for five-phase IMs, the presented nonlinear optimal (H-infinity) control approach avoids complicated state-space model transformations, is of proven global stability and its use does not require the model of the motor to be brought into a specific state-space form. The nonlinear optimal control method has clear implementation stages and moderate computational effort.

In the transportation sector, there is progressive transition to EVs. The use of five-phase IMs in EVs exhibits specific advantages, by achieving a more balanced distribution of power in the multiple phases of the motor and by providing fault tolerance. The study’s nonlinear optimal control method for five-phase IMs enables high performance for such motors and their efficient use in the traction system of EVs.

Nonlinear optimal control for five-phase IMs supports the deployment of their use in EVs. Therefore, it contributes to the net-zero objective that aims at eliminating the emission of harmful exhaust gases coming from human activities. Most known manufacturers of vehicles have shifted to the production of all-electric cars. The study’s findings can optimize the traction system of EVs thus also contributing to the growth of the EV industry.

The proposed nonlinear optimal control method is novel comparing to past attempts for solving the optimal control problem for nonlinear dynamical systems. It uses a novel approach for selecting the linearization points and a new Riccati equation for computing the feedback gains of the controller. The nonlinear optimal control method is applicable to a wider class of dynamical systems than approaches based on the solution of state-dependent Riccati equations.

The purpose of this paper is to investigate the influence of back-EMF and current harmonics on position and speed estimation accuracy for single and dual three-phase (DTP) permanent magnet synchronous machines (PMSMs) with two fundamental-model-based sensorless control strategies which are widely utilized for AC machines, i.e. flux-linkage observer (FO) and simplified extended Kalman filter (EKF).

The effect of distorted back-EMF is studied for sensorless vector control of single three-phase PMSM. For the influence of current harmonics, unlike the existing literature where the current harmonics are deliberately injected, in this paper, sensorless switching-table-based direct torque control (ST-DTC) strategies for DTP-PMSM which inherently suffer from non-sinusoidal stator currents in addition to the distorted back-EMF, are investigated experimentally.

By employing the FO and simplified EKF-based sensorless vector control of single three-phase PMSM, it can be concluded that the rotor position estimation accuracy is less affected by the back-EMF harmonics when the simplified EKF method is utilized since it is less sensitive to such noises. When the influence of non-sinusoidal stator currents together with back-EMF harmonics is investigated for the conventional and modified ST-DTC of DTP-PMSM, it is indicated that the simplified EKF exhibits better position and speed estimation accuracy in both the conventional and modified ST-DTC strategies. In addition, its steady-state performance shows a slight superiority over that based on FO, in terms of flux and torque ripples, and THD of phase currents. For the dynamic performance, the estimated speed of simplified EKF shows less phase lag and fluctuations compared to that of FO.

This paper introduces the influence of back-EMF and current harmonics on sensorless control performance for single and DTP PMSMs. Detailed experimental results show that the simplified EKF exhibits better rotor position and speed estimation accuracy compared to that of FO due to its higher noise-rejection ability.

This paper aims to present a novel robust control method based on an adaptive PI controller (APIC) to compensate for different disturbances and unknown dynamics for multi-phase induction machines.

The gains of the APIC are adapted online according to the tracking error. Proposed APIC is accompanied with designed linear disturbance observer (LDO) to present robust behavior to machine parameter variations and fault disturbances.

The results show remarkable dynamic performance in both healthy and faulty conditions when the six-phase induction machine works under APIC and LDO schemes.

The proposed controller need not readjust current controllers for the post-fault condition. The developed Simulink model efficiency is confirmed through experimental tests.

The purpose of this paper is to study the development of novel multiphase induction motor (MPIM) with copper die cast rotor in the drive system of electric propulsion vehicles (EPV). It is estimated that the manufacturers are concerned about high torque,Efficiency, motor life, energy conservation and high thermal tolerance. To ensure maximum torque and efficiency with multiphase winding and copper die cast technology to increasing high thermal tolerance, life, energy conversations. On other hand, it is very important of EPV application.

The focus of the investigation is threefold: the modified method carried out on MPIM both stator and rotor can overcome the current scenario problem facing by electric vehicles manufacture and developed perfect suitable electric motor for EPV applications. The design and simulation carried out finite element method (FEM) that was more accurate calculations. Finally developed prototype model of MPIM with copper die cast are discussed with conventional three phase Die casting Induction motor.

The paper confirmed the multiphase copper die-cast rotor induction motor (MDCrIM) is providing better performance than conventional motor. Proposed motor can bring additional advantage like heat tolerances, long life and energy conversations.

The experiments confirmed the MDCIM suitable for EPV Applications. The modified MDCIM of both stator and rotor are giving better result and good performance compared to conventional method.

This paper aims to deal with direct torque controller when the five-phase induction motor drive in faulty operation. Precisely, open-phase fault condition is contemplated. Also, the DTC is combined with a speed-adaptive variable-structure observer based on sliding mode observer.

Two novel features are presented. First, the concept of the virtual voltage vector is presented, which eliminates low-frequency harmonic currents and simplifies analysis. Second, speed information is introduced into the selection of the inverter states.

Direct torque control (DTC) is largely used in traditional three-phase drives as a backup to rotor-stator flux-oriented methods. The classic DTC strategy was primarily designed on the base of hysteresis controllers to control two independent variables (speed, torque and flux). Due to the additional degrees of freedom offered by multiphase machine, extensive works have been extended on the ensemble five-phase drives in healthy operation. In addition, the ability to continue the operation in faulty conditions is considering one of the main advantages of multiphase machines. One can find in the literature different approaches treating this subject. The applicability of DTC after the appearing of a fault has not been enclosed in the literature.

Theoretical development is presented in details followed by simulation results using Matlab/Simulink to analyze the performance of the drive, comparing with the behavior during healthy situation.