Search results

Two friction models of Fe-Fe and Diamond-like carbon (DLC)-Fe were established by molecular dynamics (MD) method to simulate the friction behavior of traditional fracturing pump plunger and new DLC plunger from atomic scale. This paper aims to investigate the effects of temperature and load on the friction behavior between sealed nitrile butadiene rubber (NBR) and DLC films.

In this study, MD method is used to investigate the friction behavior and mechanism of DLC film on plungers and sealing NBR based on Fe-Fe system and DLC-Fe system.

The results show that the friction coefficient of DLC-Fe system exhibits a downward trend with increasing load and temperature. And even achieve a superlubricity state of 0.005 when the load is 1 GPa. Further research revealed that the low interaction energy between DLC and NBR promoted the proportion of atoms with larger shear strain in NBR matrix and the lower Fe layer in DLC-Fe system to be much lower than that in Fe-Fe system. In addition, the application of DLC film can effectively inhibit the temperature rise of friction interface, but will occur relatively large peak velocity.

In this paper, two MD models were established to simulate the friction behavior between fracturing pump plunger and sealing rubber. Through the analysis of mean square displacement, atomic temperature, velocity and Interaction energy, it can be seen that the application of DLC film has a positive effect on reducing the friction of NBR.

High-nitrogen steel is a common material for the manufacture of drilling equipment such as drill collars. However, its poor surface properties often limit its applications. The purpose of this paper is to find a way to enhance the surface performance of high-nitrogen steel, which is expected to improve the wear resistance of high-nitrogen steel.

The CoCrNi and CoCrFeNi medium-entropy alloy (MEA) coatings were prepared on high-nitrogen steel substrate by laser cladding technology. The microstructure, phase composition and element distribution of the fabricated coatings were investigated using scanning electronic microscopy, electron backscatter diffraction and X-ray diffraction. The phase structure, phase stability and structural stability of the CoCrNi and CoCrFeNi MEAs were investigated in combination with phase diagram calculation and molecular dynamics. Then the wear tests were carried out for coatings.

The results show that both prepared MEA coatings have good quality and contain a single face-centered cubic phase. The wear performance of MEA coatings is improved by the refinement of grain size and the increase of dislocation density. Due to the addition of Fe atoms, the lattice distortion of the CoCrFeNi system increased, resulting in a higher dislocation density of the coating. Cr atoms in the CoCrFeNi system are the largest, and the local lattice distortions induced by them are greater. Through this study, MEA coatings with high hardness can be expanded to drilling field applications.

CoCrFeNi and CoCrNi MEA coatings were successfully prepared on the surface of high-nitrogen steel for the first time without obvious defects. The micromorphology and grain orientation of the different kinds of coatings were discussed in detail. The hardness-strengthening mechanism and structure stability of the coatings were illustrated by experiments and molecular dynamics simulations.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-04-2024-0116/

Scientists have been conducting trials to find ways to reduce fuel consumption and enhance heat transfer rates to make heating systems more efficient and cheaper. Adding solid nanoparticles to conventional liquids may greatly improve their thermal conductivity, according to the available evidence. This study aims to examine the influence of external magnetic flux on the flow of a mixed convective Maxwell hybrid non-Newtonian nanofluid over a linearly extending porous flat plate. The investigation considers the effects of thermal radiation, Dufour and Soret.

The mathematical model is formulated based on the fundamental assumptions of mass, energy and momentum conservation. The implicit models are epitomized by a set of interconnected nonlinear partial differential equations, which include a suitable and comparable adjustment. The numerical solution to these equations is assessed for approximate convergence by the Runge−Kutta−Fehlberg method based on the shooting technique embedded with the MATLAB software.

The findings are presented through graphical representations, offering a visual exploration of the effects of various dynamic parameters on the flow field. These parameters encompass a wide range of factors, including radiation, thermal and Brownian diffusion parameters, Eckert, Lewis and Soret numbers, magnetic parameters, Maxwell fluid parameters, Darcy numbers, thermal and solutal buoyancy factors, Dufour and Prandtl numbers. Notably, the authors observed that nanoparticles with a spherical shape exerted a significant influence on the stream function, highlighting the importance of nanoparticle geometry in fluid dynamics. Furthermore, the analysis revealed that temperature profiles of nanomaterials were notably affected by their shape factor, while concentration profiles exhibited an opposite trend, providing valuable insights into the behavior of nanofluids in porous media.

A distinctive aspect of the research lies in its novel exploration of the impact of external magnetic flux on the flow of a mixed convective Maxwell hybrid non-Newtonian nanofluid over a linearly extending porous flat plate. By considering variables such as solar radiation, external magnetic flux, thermal and Brownian diffusion parameters and nanoparticle shape factor, the authors ventured into uncharted territory within the realm of fluid dynamics. These variables, despite their significant relevance, have not been extensively studied in previous research, thus underscoring the originality and value of the authors’ contribution to the field.

Design an innovative Flipped classroom’s Delivery through virtual laboratory.

The fundamental framework of the present investigation is a Participatory Action Research (PAR) design. By merging the impetus of “action.” with the inclusiveness of “participation,” PAR establishes a “network” for collaborative teaching or research. PAR is pertinent to our research because it facilitates the participation of infrastructures and individuals in formulating a critical community. This community encourages critical self-reflection, promotes accountability, redistributes authority, and cultivates confidence in research. PAR fosters constructive transformation in educational environments by utilizing participants' combined insights and experiences to establish a structure for substantive dialogue and proactive measures.

As virtual laboratories are becoming essential in 21st-century science education, we found groundbreaking evidence that can support our novel approach to enhance the quality and equity in education. Our results show that virtual labs engage scientific goals and practices, develop scientific literacy, foster scientific inquiry and problem-solving, and promote metacognition. The effects of the virtual laboratory can develop high self-efficacy and positive attitudes among students. It improves students' laboratory performance, which we noted from laboratory activities, simulations, and long exam results.

The study offers groundbreaking account to depict epistemic fluency aided by virtual laboratory.

The purpose of this paper is to analyze the mechanism of nanofluid enhanced heat transfer in microchannels and promote the application of nanofluids in industrial processes such as solar collectors, electronic cooling and automotive batteries.

The two-phase lattice Boltzmann method was used to calculate the flow and heat transfer characteristics of Al₂O₃ nanofluids in a microchannel at Re = 50. By comparing the simulation results of pure water, nanofluids without calculated nanoparticle-fluid interaction forces and nanofluids with calculated nanoparticle-fluid interaction forces, the effects of physical properties improvement and interaction forces on flow and heat transfer are quantified.

The findings show that the nanofluid (φ = 3%, R = 10 nm) increases the average Nusselt number by 22.40% at Re = 50. In particular, 16.16% of the improvement relates to nanoparticles optimizing the thermophysical parameters of the base fluid. The remaining 6.24% relates to the disturbance of the thermal boundary layer caused by the interaction between nanoparticles and the base fluid. Moreover, the nanoparticle has a negligible effect on the average Fanning friction factor. Ultimately, we conclude that the nanofluid is an excellent heat transfer working medium based on its performance evaluation criterion, PEC = 1.225.

To the best of the authors' knowledge, this research quantifies for the first time the contribution of nanoparticle-liquid interactions and nanofluids physical properties to enhanced heat transfer, advancing the knowledge of the nanoparticle's behavior in liquid systems.

Analyzing and reducing entropy generation is useful for enhancing the thermodynamic performance of engineering systems. This study aims to explore how polymers and nanoparticles in the presence of Lorentz forces influence the fluid behavior and heat transfer characteristics to lessen energy loss and entropy generation.

The dispersion model is initially used to examine the behavior of polymer additives over a magnetized surface. The governing system of partial differential equations (PDEs) is subsequently reduced through the utilization of similarity transformation techniques. Entropy analysis is primarily performed through the implementation of numerical computations on a non-Newtonian polymeric FENE-P model.

The numerical simulations conducted in the presence of Lorentz forces provide significant insights into the consequences of adding polymers to the base fluid. The findings suggest that such an approach minimizes entropy in the flow region. Through the utilization of polymer-MHD (magnetohydrodynamic) interactions, it is feasible to reduce energy loss and improve the efficiency of the system.

This study’s primary motivation and novelty lie in examining the significance of polymer additives as agents that reduce entropy generation on a magnetic surface. The author looks at how nanofluids affect the development of entropy and the loss of irreversibility. To do this, the author uses the Lorentz force, the Soret effect and the Dufour effect to minimize entropy. The findings contribute to fluid mechanics and thermodynamics by providing valuable insights for engineering systems to increase energy efficiency and conserve resources.

This study aims to explore entropy evaluation in the bi-directional flow of Casson hybrid nanofluids within a stagnated domain, a topic of significant importance for optimizing thermal systems. The aim is to investigate the behavior of unsteady, magnetized and laminar flow using a parametric model based on the thermo-physical properties of alumina and copper nanoparticles.

The research uses boundary layer approximations and the Keller-box method to solve the derived ordinary differential equations, ensuring numerical accuracy through convergence and stability analysis. A comparison benchmark has been used to authenticate the accuracy of the numerical outcomes.

Results indicate that increasing the Casson fluid parameter (ranging from 0.1 to 1.0) reduces velocity, the Bejan number decreases with higher bidirectional flow parameter (ranging from 0.1 to 0.9) and the Nusselt number increases with higher nanoparticle concentrations (ranging from 1% to 4%).

This study has limitations, including the assumption of laminar flow and the neglect of possible turbulent effects, which could be significant in practical applications.

The findings offer insights for optimizing thermal management systems, particularly in industries where precise control of heat transfer is crucial. The Keller-box simulation method proves to be effective in accurately predicting the behavior of such complex systems, and the entropy evaluation aids in assessing thermodynamic irreversibilities, which can enhance the efficiency of engineering designs.

These findings provide valuable insights into the thermal management of hybrid nanofluid systems, marking a novel contribution to the field.

The purpose of this study focused on a global longitudinal bibliometric mapping of research in the field of health biotechnology between 1990 and 2023 to determine who is leading this field of knowledge and to estimate the sub-disciplines that are emerging and project those that will prevail in the future.

The study identified the most relevant countries, institutions and researchers, as well as the type of scientific collaborations. The applied steps applied in the study were the following: identification and selection of keyword terms by a panel of experts; design and application of an algorithm to identify these selected keywords in titles, abstracts and keywords using Web of Science terms to contrast them; performance of JCR data processing during 2023 using R, Python and VOSviewer.

Among the most relevant conclusions of the study are the following exponential growth has been observed in the study period; new branches of knowledge have emerged in which the subjects have been acquiring their own autonomous capabilities; and R&D in this field is still concentrated in a small group of core countries, and the trend is for it to remain so due to the capacity needs required.

This contribution seeks to systematize the existing scientific knowledge in the field of biotechnology, specifically in the area of health, using the technique of scientific mapping based on a logical model of indicators that aims to determine potential thematic ramifications.

Enzymes play a pivotal role in orchestrating essential biochemical processes and influencing various cellular activities in tissue. This paper aims to provide the process of enzyme diffusion within the tissue matrix and enhance the nano system performance by means of the effectiveness of enzymatic functions. The diffusion phenomena are also documented, providing chemical insights into the complex processes governing enzyme movement.

A computational analysis is used to develop and simulate an optimal control model using numerical algorithms, systematically regulating enzyme concentrations within the tissue scaffold.

The accompanying videographic footages offer detailed insights into the dynamic complexity of the system, enriching the reader’s understanding. This comprehensive exploration not only contributes valuable knowledge to the field but also advances computational analysis in tissue engineering and biomimetic systems. The work is linked to biomolecular structures and dynamics, offering a detailed understanding of how these elements influence enzymatic functions, ultimately bridging the gap between theoretical insights and practical implications.

A computational predictive model for nanozyme that describes the reaction diffusion dynamics process with enzyme catalysts is yet not available in existing literature.

To improve the thermal performance of base fluid, nanoparticles of three types are dispersed in the base fluid. A novel theory of non-Fourier heat transfer is used for design and development of models. The thermal performance of sample fluids is compared to determine which types of combination of nanoparticles are the best for an optimized enhancement in thermal performance of fluids. This article aims to: (i) investigate the impact of nanoparticles on thermal performance; and (ii) implement the Galerkin finite element method (GFEM) to thermal problems.

The mathematical models are developed using novel non-Fourier heat flux theory, conservation laws of computational fluid dynamics (CFD) and no-slip thermal boundary conditions. The models are approximated using thermal boundary layer approximations, and transformed models are solved numerically using GFEM. A grid-sensitivity test is performed. The accuracy, correction and stability of solutions is ensured. The numerical method adopted for the calculations is validated with published data. Quantities of engineering interest, i.e. wall shear stress, wall mass flow rate and wall heat flux, are calculated and examined versus emerging rheological parameters and thermal relaxation time.

The thermal relaxation time measures the ability of a fluid to restore its original thermal state, called thermal equilibrium and therefore, simulations have shown that the thermal relaxation time associated with a mono nanofluid has the most substantial effect on the temperature of fluid, whereas a ternary nanofluid has the smallest thermal relaxation time. A ternary nanofluid has a wider thermal boundary thickness in comparison with base and di- and mono nanofluids. The wall heat flux (in the case of the ternary nanofluids) has the most significant value compared with the wall shear stresses for the mono and hybrid nanofluids. The wall heat and mass fluxes have the highest values for the case of non-Fourier heat and mass diffusion compared to the case of Fourier heat and mass transfer.

An extensive literature review reveals that no study has considered thermal and concentration memory effects on transport mechanisms in fluids of cross-rheological liquid using novel theory of heat and mass [presented by Cattaneo (Cattaneo, 1958) and Christov (Christov, 2009)] so far. Moreover, the finite element method for coupled and nonlinear CFD problems has not been implemented so far. To the best of the authors’ knowledge for the first time, the dynamics of wall heat flow rate and mass flow rate under simultaneous effects of thermal and solute relaxation times, Ohmic dissipation and first-order chemical reactions are studied.