Search results

This work describes the fabrication of composite nanogrease based on carbon nanotubes (CNTs) as an additive at different volume concentrations 0, 0.5, 1, 2 and 3 Wt.% and investigates the correlation between CNTs and grease rheological behaviour. In addition, study the influence of shear thinning rate at various temperatures and investigates the thermal conductivity of nanogrease. The results demonstrated that grease behaves like a Newtonian viscoelastic material with a narrow linear domain. The thermal conductivity of nanogrease was enhanced by about 31.58 per cent, and the thermal and mechanical stabilities improved. Moreover, the apparent viscosity and dropping point increased by about 93 and 27 per cent, respectively.

Grease was dissolved in chloroform (10 Wt.%), at 25°C for 1 h. In parallel, functionalized CNTs with different volume concentrations (0.5, 1, 2 and 3 Wt.%) were dispersed in N,N-dimethylformamide; the dispersion was stirred for 15 min, and then sonicated (40 kHz, 150 W) for 30 min. Grease solution was then added to the CNTs. The nanofluid was magnetically stirred for 15 min and then sonicated for 2 h. This ensured uniform dispersion of nanoparticles in the base fluid.

Inexpensive and simple fabrication of nanogrease. Thermal conductivity of nanogrease was typically enhanced compared to other reported studies. Apparent viscosity and dropping point increases with the increase the volume concentration.

This work describes the inexpensive and simple fabrication of nanogrease for improving properties of lubricants, which improve power efficiency and extend lifetimes of mechanical equipment.

To enhance the tribological properties of nanogrease, one of the new technologies was used to synthesize a nanogrease having carbon nanotubes (CNTs) nanoparticles (NPs) with different concentrations. The microstructures of the synthesized NPs were characterized and evaluated by x-ray diffraction spectroscopy (XRD) and transmission electron microscopy (TEM). Tribological properties of the nanogrease were evaluated using a four-ball tester. The worn surface of four steel balls was investigated by scanning electron microscopy (SEM) and energy dispersive x-ray spectroscopy (EDX).

Grease was dissolved in chloroform (10 Wt.%), at 25 °C for 1 h. In parallel, functionalized CNTs with different volume concentrations (0.5, 1, 2 and 3 Wt.%) were dispersed in N, N-dimethylformamide. The mixture was stirred for 15 min and then sonicated (40 kHz, 150 W) for 30 min. After that, the mixture was added to the grease solution and magnetically stirred for 15 min and then sonicated for 2 h.

The results suggested that CNTs can enhance the antiwear and friction properties of nanogrease at 0.5 Wt.% CNTs to about 57 and 48 per cent, respectively. In addition, the weld load of the base oil containing 0.5 Wt.% CNTs was improved by 17 per cent compared with base grease.

This work describes the inexpensive and simple fabrication of nanogrease for improving the properties of lubricants, which improve power efficiency and extend lifetimes of mechanical equipment.

The purpose of this paper is to investigate the rheological characteristics of graphene nanoplatelets (GNPs) and hybridized nanocomposite consisting of multi-walled carbon nanotubes (MWCNTs) and GNPs as an additive on lithium-based grease. The experiments of nanogrease are examined in different values of shear stress, apparent viscosity, temperature and shear rate using Brookfield Programmable Rheometer DV-III ULTRA and characterized by high-resolution transmission electron microscope (HRTEM) and X-ray diffraction (XRD).

First, GNPs was mixed well with lithium grease using mechanical stirring at 3,500 rpm for 15 min at room temperature to form a homogenous composite at different concentrations (0.5, 1, 1.5, 2 and 2.5 Wt.%). Afterwards, MWCNTs and GNPs are mixed and dispersed well in the lithium grease using a sonication path for 30 min and mechanical stirring at 3,500 rpm for 15 min at 28°C to form a homogenous nanocomposite.

The results indicated that 1 Wt.% of GNPs is the optimum concentration. Subsequently, the weight percentage of additives varying between MWCNTs and GNPs are tested, and the result indicate that the grease containing GNPs had a 75 per cent increase in shear stress and 93.7 per cent increase in apparent viscosity over ordinary grease.

This work describes the inexpensive and simple fabrication of nanogrease for improving properties of lubricants, which improve power efficiency and extend lifetimes of mechanical equipment.

The purpose of this paper is to evaluate the influence of nanoparticles as an additive on the tribological properties of calcium grease.

The nano additives in this research are with different concentration of multi carbon nanotubes (MWCNTs) and Talc powder (1, 2, 3, 3 and 5 per cent). The ratio of MWCNTs to Talc powder is 1:1. The tribological properties of hyper MWCNTs/Talc powder to calcium grease were evaluated using a pin-on-disk wear testing. The results show that the nano additives MWCNTs/Talc to calcium grease exhibit good performance in anti-wear and friction reduction. The action mechanism was estimated through analysis of the worm surface with x-ray diffraction and transmission electron microscope.

The result indicates that boundary film mainly composed of MWCNT and Talc powder, and other organic compound was formed on the worm surface during the friction test. In addition, the wear rate and coefficient of friction of nanogreases have shown excellent improvement about 80.62 and 63.44 per cent, respectively, at 4 Wt.% of MWCNTs/Talc powder. Moreover, the thermal conductivity of nanogrease increased about 51.72 per cent.

This study describes the inexpensive and simple fabrication of nanogrease for improving properties of lubricants, which improve power efficiency and extend lifetimes of mechanical equipment.

Large class sizes are becoming the norm in higher education against concerns of dropping learning qualities. To maintain the standard of learning and add value, one of the common strategies is for the course convenor to proactively monitor student engagement with learning activities against their assessment outcomes and intervene timely. Learning analytics has been increasingly adopted to provide these insights into student engagement and their performance. This case study explores how learning analytics can be used to meet the convenor’s requirements and help reduce administrative workload in a large health science class at the University of New South Wales.

This case-based study adopts an “action learning research approach” in assessing ways of using learning analytics for reducing workload in the educator’s own context and critically reflecting on experiences for improvements. This approach emphasises reflexive methodology, where the educator constantly assesses the context, implements an intervention and reflects on the process for in-time adjustments, improvements and future development.

The results highlighted ease for the teacher towards the early “flagging” of students who may not be active within the learning management system or who have performed poorly on assessment tasks. Coupled with the ability to send emails to the “flagged” students, this has led to a more personal approach while reducing the number of steps normally required. An unanticipated outcome was the potential for additional time saving through improving the scaffolding mechanisms if the learning analytics were customisable for individual courses.

The results provide further benefits for learning analytics to assist the educator in a growing blended learning environment. They also reveal the potential for learning analytics to be an effective adjunct towards promoting personal learning design.

This paper aims to modify carbon nanotubes with oleic acid, and to study the tribological properties of castor oil with modified carbon nanotubes additives. The proper additives are sought for the future engineering application of castor oil.

Tribological properties of the castor oils mixed with the modified carbon nanotubes of four mass percentages were investigated using a four-ball testing rig. Coefficient of friction and wear scar diameter were obtained in each test, and the mechanism of modified carbon nanotubes and castor oil was discussed.

The results indicated that modified carbon nanotubes had better dispersion in castor oil. Coefficient of friction first increased, then decreased and finally grew stable with the time, and wear scar diameter of steel surface functioned as a first reduced then increased change with the additive mass percentage of modified carbon nanotubes. The minimum of average coefficient of friction and wear scar diameter occurred at 0.02 Wt.% modified carbon nanotubes.

A small amount of modified carbon nanotubes could improve properties of the castor oil, and the mixed castor oil with 0.02 Wt.% modified carbon nanotubes would be most possibly used in engineering applications.

This study investigates taxpayers’ perception to the Jordanian tax system efficiency according to the perspective of Keynes. Its main purpose is to determine whether taxpayers perceive the Jordanian tax system as efficient, enough to influence taxpayers’ patterns of behavior, or inefficient and just used to collect revenue by the government. A self‐administered questionnaire is used to collect the primary data of the study, in order to measure the economical and socio‐cultural efficiency of the system. A convenience sample consisting of 175 respondents was selected to survey how taxpayers perceive the Jordanian tax system efficiency. The t‐test is used as a decision criterion for the acceptance or rejection of the hypotheses. Correlation analysis is also used to support the findings of the study. The study finds that taxpayers perceive the Jordanian tax system as efficient, and they perceive that the tax system is intentionally used to influence their behavior.

The purpose of this paper is to draw a map of the general features of epistemological and critical concerns in contemporary Islamic philosophy. This study will not be confined to the domain of academic philosophy or to those who are professionals in the field of philosophy.

The paper adopted the critical rational approach in dealing with contemporary Islamic philosophy in the Arab world. The scope will include scholars from different fields of epistemology who tried to present a “vision” of the attitude that should be adopted in facing the challenges of the age and the problems of the nation on the epistemological level or the political, economic and social levels.

There is a need for a philosophy of action and progress rather than a philosophy that is based on abstract ideas and theories and of words/rhetoric. The ethics required to accomplish this ought to identify the attributes of the citizen who can reach self-actualization through legitimate means based on a progress agenda with theoretical and philosophical foundations.

Because a critical rational approach can be dealt with from different perspectives, this paper will adopt the classification of the principal intellectual trends: the reformist, secular and liberal.

This paper covers a long time span to determine whether the philosophical projects have been effective.

This paper, which criticizes the philosophic projects that are theoretically unsound and that do not address real social problems (like poverty), argues the need for a philosophy of progress and action. This will lead to devising an agenda that addresses the challenges the society is facing and to finding alternative and creative solutions resulting in development.

The purpose of this study is to develop functional probiotic Labneh cheeses supplemented with broccoli florets.

Probiotic Labneh cheese was produced using broccoli florets paste at four different levels (0, 5, 10 and 15%), with Lactobacillus casei NRRL B-1922 as a probiotic strain, to evaluate its physicochemical, phenols, antioxidant activity, minerals, vitamins, textural, microbiological and sensory characteristics during storage for 15 days.

The results indicated that Labneh cheese with added broccoli paste exhibited significantly (p = 0.05) higher level of moisture, acidity, soluble nitrogen, phenols, antioxidant activity, minerals and B vitamins, and lower protein, fat, ash and pH values when compared to control Labneh cheese. Textural analysis of Labneh cheese indicated that Labneh with higher level of broccoli (15%) exhibited harder texture than others. Higher viable counts of Lactobacillus casei and Streptococcus thermophilus were detected in Labneh with broccoli paste, and the counts (107 cfu/g) were higher than the number should be present to achieve their health benefits. The most acceptable Labneh cheeses were those supplemented with 5 and 10% broccoli paste.

This study revealed broccoli florets could enhance the growth of Lactobacillus casei and Streptococcus thermophilus in the Labneh matrix, which resulted in a wider spectrum of health benefits of Labneh cheese to the consumers.

This study aims to focus on the main materials used in consolidation processes of illuminated paper manuscripts and leather binding.

For each material, chemical structure, chemical composition, molecular formula, solubility, advantages, disadvantages and its role in treatment process are presented.

This study concluded that carboxy methyl cellulose, hydroxy propyl cellulose, methyl cellulose, cellulose acetate, nanocrystalline cellulose, funori, sturgeon glue, poly vinyl alcohol, chitosan, chitosan nanoparticles (NPs), gelatin, aquazol, paraloid B72 and hydroxyapatite NPs were the most common and important materials used for the consolidation of illuminated paper manuscripts. For the leather bindings, hydroxy propyl cellulose, polyethylene glycol, oligomeric melamine-formaldehyde resin, acrylic wax SC6000, pliantex, paraloid B67 and B72, silicone oil and collagen NPs are the most consolidants used.

Illuminated paper manuscripts with leather binding are considered one of the most important objects in libraries, museums and storehouses. The uncontrolled conditions and other deterioration factors inside the libraries and storehouses lead to degradation of these artifacts. The brittleness, fragility and weakness are considered the most common deterioration aspects of illuminated paper manuscripts and leather binding. Therefore, the consolidation process became vital and important to solve this problem. This study presents the main materials used for consolidation process of illuminated paper manuscripts and leather bindings.