Search results

To study the steady mixed convection boundary‐layer flow of a micropolar fluid near the region of the stagnation point on a double‐infinite vertical flat plate is studied. The results of this paper are important for the researchers in the area of micropolar fluids.

For the case considered the problem reduces to a system of ordinary differential equations, which is solved numerically using the Keller‐box method. This method is very efficient for solving boundary‐layer problems and it can easily be applied to other general situations than that presented in this paper. Any PhD student can learn and apply it very easily.

Representative results for the velocity, microrotation and temperature profiles, as well as for the reduced skin friction coefficient and the local Nusselt number have been obtained for the case of strong concentration, Prandtl number of 0.7, some values of the material parameter K and the mixed convection parameter λ(≥0). Both assisting and opposing flow cases are considered. Results for the reduced skin friction coefficient and reduced local Nusselt number as well as for the reduced velocity, temperature and microrotation profiles are given in tables and figures. The obtained results are compared with ones from the open literature and it is found that they are in excellent agreement. The important conclusion is, we have been able to show that for opposing flow solutions are possible are possible only for a limited range of values of the mixed convection parameter λ.

The results of this paper are valid only in the small region around the stagnation point on a vertical surface and they are not applicable outside this region.

The theory of micropolar fluids and also the results of the present paper can be used to explain the characteristics in certain fluids such as exotic lubricants, colloidal suspensions or polymeric fluids, liquid crystals, and animal blood.

The paper is very well prepared, presented and readable. We believe that the results are original and important from both theoretical and application point of views.

The purpose of this paper is to study the unsteady boundary layer flow of a micropolar fluid past a circular cylinder which is started impulsively from rest.

The nonlinear partial differential equations consisting of three independent variables are solved numerically using the 3D Keller‐box method.

Numerical solutions for the velocity profiles, wall skin friction and microrotation profiles are obtained and presented for various values of time t and material parameter K with the boundary condition for microrotation n=0 (strong concentration of microelements) and n=1/2 (weak concentration of microelements). The results are presented along the points on the cylinder surface, starting from the forward to the rear stagnation point, for small time up to the time when the boundary layer flow separates from the cylinder.

It is believed that this is the first paper that uses the 3D Keller‐box method to study the unsteady boundary layer flow of micropolar fluids. In the last four decades, there has been overhelming interest shown by researchers in micropolar fluids and still many problems are unsolved. The paper shows not only the fundamental importance of this problem, but also the implications for situations of practical interest.

Miniaturization with high thermal performance and lower cost is one of the advanced developments in industrial science chemical and engineering fields including microheat exchangers, micro mixers, micropumps, cooling microelectro mechanical devices, etc. In addition to this, the minimization of the entropy is the utilization of the energy of thermal devices. Based on this, in the present investigation, micropolar nanofluid flow through an inclined channel under the impacts of viscous dissipation and mixed convection with velocity slip and temperature jump has been numerically studied. Also the influence of magnetism and radiative heat flux is used.

The nonlinear system of ordinary differential equations are obtained by applying suitable dimensionless variables to the governing equations, and then the Runge–Kutta–Felhberg integration scheme is used to find the solution of velocity and temperature. Entropy generation and Bejan number are calculated via using these solutions.

It is established to notice that the entropy generation can be improved with the aspects of viscous dissipation, magnetism and radiative heat flux. The roles of angle of inclination (α), Eckert number (Ec), Reynolds number (Re), thermal radiation (Rd), material parameter (K),  slip parameter (δ), microinertial parameter (aj), magnetic parameter (M), Grashof number (Gr) and pressure gradient parameter (A) are demonstrated. It is found that the angle of inclination and Grashof number enhances the entropy production while it is diminished with material parameter and magnetic parameter.

Electrically conducting micropolar nanofluid flow through an inclined channel subjected to the friction irreversibility with temperature jump and velocity slip under the influence of radiative heat flux has been numerically investigated.

The purpose of this paper is to investigate micropolar magnetohydrodynamics (MHD) fluid flow passing over a vertical plate. Three different base fluids have been used that include water, ethylene glycol and ethylene glycol/water (50%–50%). Also, a nanoparticle was used in all of the base fluids. The effects of natural convection heat transfer and magnetic field have been taken into account.

The main purpose of solving the governing equations is to scrutinize the effects of the magnetic parameter, the nanoparticle volume fraction, micropolar parameter and nanoparticles shape factor on velocity, temperature and microrotation profiles, the skin friction coefficient and the Nusselt number. These surveys have been considered for three base fluids simultaneously.

The results indicate that for water-based fluids, the temperature profile of lamina-shaped nanoparticles is 38.09% higher than brick-shaped nanoparticles.

This paper provides micropolar MHD fluid flow analysis considering natural convection heat transfer and magnetic field in three different base fluids. The aim of assessments is the diagnosis of some parameter effects, such as magnetic parameter and nanoparticle volume fraction, on velocity, temperature and microrotation profiles and components. Also, the use of mixed base fluids presented as a novelty in this paper.

This paper aims to focus on the natural convective flow analysis of micropolar nanofluid fluid in a rectangular vertical container. A heated source is placed in the lower wall to generate the internal flow. In further assumptions, the left/right wall are kept cool, while the upper and lower remaining portions are insulated. Free convection prevails in the regime because of thermal difference in-between the lower warmer and upper colder region.

The physical setup owns mathematical framework in-terms of non-linear partial differential equations. For the solution purpose of the differential system, finite volume method is adopted. The interesting features of the flow along with thermal transportation involve both translational and rotational movement of fluid particles.

Performing the simulations towards flow controlling variables the outputs are put together in contour maps and line graphs. It is indicated that the variations in flow profile mass concentration and temperature field augments at higher Rayleigh parameter because of stronger buoyancy effects. Higher viscosity coefficient implies decrease in flow and thermal transportation. Further, the average heat transfer rate also grows by increasing both the Rayleigh parameter and heated source length.

To the best of the authors’ knowledge, no such study has been addressed yet. Further, the results are validated by comparing with previously published work.

The purpose of this paper is to study theoretically the steady two‐dimensional mixed convection flow of a micropolar fluid impinging obliquely on a stretching vertical sheet. The flow consists of a stagnation‐point flow and a uniform shear flow parallel to the surface of the sheet. The sheet is stretching with a velocity proportional to the distance from the stagnation point while the surface temperature is assumed to vary linearly. The paper attempts also to show that a similarity solution of this problem can be obtained.

Using a similarity transformation, the basic partial differential equations are first reduced to ordinary differential equations which are then solved numerically using the Keller box method for some values of the governing parameters. Both assisting and opposing flows are considered. The results are also obtained for both strong and weak concentration cases.

These results provide information about the effect of a/c (ratio of the stagnation point velocity and the stretching velocity), σ (shear flow parameter) and K (material parameter) on the flow and heat transfer characteristics in mixed convection flow near a non‐orthogonal stagnation‐point on a vertical stretching surface. The results show that the shear stress increases as K increases, while the heat flux from the surface of the sheet decreases with an increase in K.

The results in this paper are valid only in the small region around the stagnation‐point on the vertical sheet. It is found that for smaller Prandtl number, there are difficulties in the numerical computation due to the occurrence of reversed flow for opposing flow. An extension of this work could be performed for the unsteady case.

The present results are original and new for the micropolar fluids. They are important in many practical applications in manufacturing processes in industry.

A nonsimilar boundary layer analysis is presented for the problem of natural convection in micropolar fluids along a nonisothermal vertical plate. The transformed governing laws are solved numerically using a finite difference method. Numerical results are presented for the details of the velocity and temperature fields for a range of values of material properties of the fluid.

A boundary layer solution is presented to the steady free convection from a vertical plate with uniform surface heat flux conditions and immersed in a micropolar fluid. Numerical solutions for governing nonsimilar boundary layer equations are presented for a range of values of the material properties and Prandtl number of the fluid. An asymptotic solution is developed for large distances away from the leading edge.

This paper aims to study a non-Newtonian micropolar fluid flow over a bidirectional flexible surface for multiple exact solutions of momentum boundary layer and thermal transport phenomenon subject to wall mass flux, second-order slip and thermal jump conditions.

The coupled equations are transformed into ordinary differential equations using similarity variables. Analytical and numerical techniques are used to solve the coupled equations for single, dual or multiple solutions.

The results show that the stretching flow, shrinking flow, the wall drag, thermal profile and temperature gradient manifest large changes when treated for special effects of the standard parameters. The role of critical numbers is definitive in locating the domains for the existence of exact solutions. The nondimensional parameters, such as mass transfer parameter, bidirectional moving parameter, plate deformation strength parameter, velocity slips, material parameter, thermal jump and Prandtl number, are considered, and their physical effects are presented graphically. The presence of governing parameters exhibits special effects on the flow, microrotation and temperature distributions, and various exact solutions are obtained for the special parametric cases.

The originality and value of this work lie in its exploration of non-Newtonian micropolar fluid flow over a bidirectional flexible surface, highlighting the multiple exact solutions for momentum boundary layers and thermal transport under various physical conditions. The study provides insights into the effects of key parameters on flow and thermal behavior, contributing to the understanding of complex fluid dynamics.

In recent years, microfluidics has turned into a very important region of research because of its wide range of applications such as microheat exchanger, micromixers fuel cells, cooling systems for microelectronic devices, micropumps and microturbines. Therefore, in this paper, micropolar nanofluid flow through an inclined microchannel is numerically investigated in the presence of convective boundary conditions. Heat transport of fluid includes radiative heat, viscous and Joule heating phenomena.

Governing equations are nondimensionalized by using suitable dimensionless variables. The relevant dimensionless ordinary differential systems are solved by using variational finite element method. Detailed computations are done for velocity, microrotation and temperature functions. The influence of various parameters on entropy generation and the Bejan number is displayed and discussed.

It is established that the entropy generation rate increased with both Grashof number and Eckert number, while it decreased with nanoparticle volume fraction and material parameter. Temperature is decreased by increasing the volume fraction of Ag nanoparticle dispersed in water.

According to the literature survey and the best of the author’s knowledge, no similar studies have been executed on micropolar nanofluid flow through an inclined microchannel with effect of viscous dissipation, Joule heating and thermal radiation.