Search results

To study optical resonances in metallic nanoparticles.

The metallic nanoparticle is modeled as a dielectric body dispersive in frequency with assigned dielectric constant. The electric field is expressed as function of the charge distribution through an integral formulation. By imposing the boundary conditions on the nanoparticle surface, the equations for the induced charge in the nanoparticle is obtained. The numerical solution of such equations allows to treat arbitrary geometries and to estimate the effects of deviations from ideality on the resonance values.

Plasmon resonances in metallic nanoparticles can be safely studied with an electro‐quasistatic approximation. The resonance frequencies depend greatly on the details of the geometry of the nanoparticles.

The free‐space wavelength is supposed to be much greater than the largest characteristic dimension of the nanoparticles. Consequently, a electro‐quasistatic model is used to evaluate the distribution of the charges induced in the metallic nanoparticle.

Two methods are presented for the evaluation of the resonance frequencies starting from the numerical solution for a given geometry.

The analysis of fluid flow and thermal transport performance inside the cavity has found numerous applications in various engineering fields, such as nuclear reactors and solar collectors. Nowadays, researchers are concentrating on improving heat transfer by using ternary nanofluids. With this motivation, the present study analyzes the natural convective flow and heat transfer efficiency of ternary nanofluids in different types of porous square cavities.

The cavity inclination angle is fixed ω = 0 in case (I) and ω=π4 in case (II). The traditional fluid is water, and Fe3O4+MWCNT+Cu/H2O is treated as a working fluid. Ternary nanofluid's thermophysical properties are considered, according to the Tiwari–Das model. The marker-and-cell numerical scheme is adopted to solve the transformed dimensionless mathematical model with associated initial–boundary conditions.

The average heat transfer rate is computed for four combinations of ternary nanofluids: Fe3O4(25%)+MWCNT(25%)+Cu(50%),Fe3O4(50%)+MWCNT(25%)+Cu(25%),Fe3O4(33.3%)+MWCNT(33.3%)+Cu(33.3%) and Fe3O4(25%)+MWCNT(50%)+Cu(25%) under the influence of various physical factors such as volume fraction of nanoparticles, inclined magnetic field, cavity inclination angle, porous medium, internal heat generation/absorption and thermal radiation. The transport phenomena within the square cavity are graphically displayed via streamlines, isotherms, local and average Nusselt number profiles with adequate physical interpretations.

The purpose of this study is to determine whether the ternary nanofluids may be used to achieve the high thermal transmission in nuclear power systems, generators and electronic device applications.

The current analysis is useful to improve the thermal features of nuclear reactors, solar collectors, energy storage and hybrid fuel cells.

To the best of the authors’ knowledge, no research has been carried out related to the magneto-hydrodynamic natural convective Fe3O4+MWCNT+Cu/H2O ternary nanofluid flow and heat transmission filled in porous square cavities with an inclined cavity angle. The computational outcomes revealed that the average heat transfer depends not only on the nanoparticle’s volume concentration but also on the existence of heat source and sink.

This paper aims to present an analytical investigation of energy and exergy performance on a solar flat plate collector (SFPC) with Cu-CuO/water hybrid nanofluid, Cu/water and CuO/water nanofluids as collector running fluids.

Heat transfer characteristics, pressure drop and energy and exergy efficiencies of SFPC working on these nanofluids are investigated and compared. In this study, a comparison is made by varying the mass flow rates and nanoparticle volume concentration. Thermophysical properties of hybrid nanofluids are estimated using distinctive correlations available in the open literature. Then, the influence of these properties on energy and exergy efficiencies of SFPC is discussed in detail.

Energy analysis reveals that by introducing the hybrid nanoparticles in water, the thermal conductivity of the working fluid is enhanced by 17.52 per cent and that of the individual constituents is enhanced by 15.72 and 15.35 per cent for Cu/water and CuO/water nanofluids, respectively. This resulted in 2.16 per cent improvement in useful heat gain for hybrid nanofluid and 1.03 and 0.91 per cent improvement in heat gain for Cu/water and CuO/water nanofluids, respectively. In line with the above, the collector efficiency increased by 2.175 per cent for the hybrid nanofluid and 0.93 and 1.05 per cent enhancement for Cu/water and CuO/water nanofluids, respectively. Exergy analysis elucidates that by using the hybrid nanofluid, exergy efficiency is increased by 2.59 per cent, whereas it is 2.32 and 2.18 per cent enhancement for Cu/water and CuO/water nanofluids, respectively. Entropy generation is reduced by 3.31, 2.35 and 2.96 per cent for Cu-CuO/water, Cu/water and CuO/water nanofluids, respectively, as compared to water.

However, this is associated with a penalty of increment in pressure drop of 2.92, 3.09 and 2.74 per cent for Cu-CuO/water, Cu/water and CuO/water nanofluids, respectively, compared with water.

It is clear from the analysis that Cu-CuO/water hybrid nanofluids possess notable increment in both energy and exergy efficiencies to use them in SFPCs.

Whilst a modest number of investigations have been undertaken concerning nanofluids (NFs), the exploration of fluid flow under exponentially stretching velocities using NFs remains comparatively uncharted territory. This work presents a distinctive contribution through the comprehensive examination of heat and mass transfer phenomena in the NF ND–Cu/H₂O under the influence of an exponentially stretching velocity. Moreover, the investigation delves into the intriguing interplay of gyrotactic microorganisms and convective boundary conditions within the system.

Similarity transformations have been used on PDEs to convert them into dimensionless ODEs. The solution is derived by using the homotopy analysis method (HAM). The pictorial notations have been prepared for sundry flow parameters. Furthermore, some engineering quantities are calculated in terms of the density of motile microbes, Nusselt and Sherwood numbers and skin friction, which are presented in tabular form.

The mixed convection effect associated with the combined effect of the buoyancy ratio, bioconvection Rayleigh constant and the resistivity due to the magnetization property gives rise to attenuating the velocity distribution significantly in the case of hybrid nanoliquid. The parameters involved in the profile of motile microorganisms attenuate the profile significantly.

The current simulations have uncovered fascinating discoveries about how metallic NFs behave near a stretched surface. These insights give us valuable information about the characteristics of the boundary layer close to the surface under exponential stretching.

The novelty of the current investigation is the analysis of NF ND–Cu/H₂O along with an exponentially stretching velocity in a system with gyrotactic microorganisms. The investigation of fluid flow at an exponentially stretching velocity using NFs is still relatively unexplored.

The purpose of this study is to investigate the enhancement and suppression of heat transfer for hybrid nanofluids (Cu–Al2O3/water) in a square enclosure containing a thermal-conductive cylinder when the Lorentz force is applied to the hybrid nanofluids.

Since the inner conductive cylinder in present research has a complex geometry, an in-house meshless method, namely, the local radial basis function (LRBF) method, is applied to solve the 2 dimensional (2D) incompressible Navier–Stokes equation in the fluid domain and Fourier heat conduction equation in solid domain. The solid–fluid interface remains the physical continuity of temperature and heat flux. Only the Lorentz force is considered for the presence of the magnetic field. The conjugate natural convection is assumed to be steady, thus only fully developed heat exchange from the nanofluids to solid or vice versa is comprehensively investigated.

It can be concluded that Lorentz force plays a more significant role than hybrid nanofluids in enhancing/suppressing heat transfer when the orientation of magnetic field is the same to the x direction. The thermal conductivity ratio can dramatically change the isotherms and streamlines as well as the mean value of the Nusselt number, resulting in totally different heat transfer phenomena. The included angle of magnetic field also has a significant effect on the heat transfer rate when it changes from horizontal to vertical.

The constant thermo-physical properties of incompressible fluid and the 2D steady flow are considered in this study.

The conjugate MHD natural convection of hybrid nanofluids is numerically investigated by an in-house meshless LRBF method. The enhancement and suppression of heat transfer under the combined influence of the volume fraction of nanoparticles, Hartmann number and the thermal conductivity ratio are comprehensively investigated.

The purpose of this study is to conduct a comparative investigation for incompressible electrically conducting nanofluid fluid through wall jet. Single-walled carbon nanotubes (SWCNTs) and multiple-walled carbon nanotubes (MWCNTs) are considered as the nanoparticles. To record the effect of Lorentz forces, a magnetic field is applied normally with the assumption that the induced magnetic field is negligible.

Boundary layer approximation is used to convert governing equations into ordinary differential equations along with appropriate boundary conditions. To obtain the results, used homotopy analysis method (HAM) has been used as an analytical technique and to validate the obtained results a famous numerical Runge–Kutta–Fehlberg method is also exploited. It has been observed that the results obtained through both of the methods are in excellent agreement with exact solution.

The Hartmann number is used as controlling parameter for velocity and temperature profile. That can be recorded as its extended values help to normalize the velocity, whereas it controls the rapid increase in temperature. The temperature profile is boosted by increasing the value of the Biot number, a physical parameter. Similarly, it also increases for an increased percentage of volume fraction of particles (SWCNTs/MWCNTs). The Hartmann number plays an important role in decreasing local skin friction coefficient. The influence of the Biot number and volume fraction of nanoparticles caused similar increasing effects on the local Nusselt number. Nanoparticles of the form SWCNT provide better heat transfer as compared to MWCNTs. Influence of the Biot number and volume fraction of nanoparticles caused similar increasing effects on the local Nusselt number. Nanoparticles of the form SWCNT provide better heat transfer as compared to MWCNTs.

To gain insight into the problem, the effects of various emerging parameters and physical quantities such as Biot number, Nusselt number and skin friction coefficient, have been explored.

The evaluation of high thermal efficiency has actively highlighted the unique behaviour of hybrid nanofluid. Thus, the purpose of this paper is to emphasize the hybrid nanofluid’s stagnation point in three-dimensional flow with magnetic field.

The defined ordinary differential equations systems are addressed using the bvp4c solver.

The results indicate that using dual solutions is possible as long as the physical parameters remain within their specified ranges. Hybrid nanofluid flow has been recognised for its superior heat transfer capabilities in comparison to both viscous flow and nanofluid flow. Furthermore, it has been demonstrated in the current study that augmenting the volume concentration of nanoparticles leads to a corresponding enhancement in the rate of heat transfer. When the velocity gradients ratio is augmented, there is a corresponding reduction in the thermal performance. The separation value grows as the magnetic parameter rises, which signifies the expansion of the boundary layer.

The originality of the paper highlights the general mathematical hybrid model of the three-dimensional problem with the magnetohydrodynamics (MHD) effect in the stagnation point flow. The comprehensive examination of the suggested model has not yet been thoroughly addressed in prior research.

This study aims to investigate the heat transfer characteristic of the magnetohydrodynamic (MHD) hybrid nanofluid over the linear stretching and shrinking surface in the presence of suction and thermal radiation effects.

Mathematical equations are transformed into pairs of self-similarity equations using similarity transformation. Boundary value problem solver (bvp4c) in MATLAB was adopted to solve the system of reduced similarity equations. In this study, the authors particularly examine the flow and heat transfer properties for different values of suction and thermal radiation parameters using single-phase nanofluid model. A comparison of the present results shows a good agreement with the published results.

It is noticed that the efficiency of heat transfer of hybrid nanofluid (Cu-Al₂O₃/H₂O) is greater than the nanofluid (Cu/H₂O). Furthermore, it is also found that dual solutions exist for a specific range of the stretching/shrinking parameter with different values of suction and radiation parameters. The results indicate that the skin friction coefficient and the local Nusselt number increase with suction effect. The values of the skin friction coefficient increases, but the local Nusselt number decreases for the first solution with the increasing of thermal radiation parameter. It is also observed that suction and thermal radiation widen the range of the stretching/shrinking parameter for which the solution exists.

In practice, the investigation on the flow and heat transfer of MHD hybrid nanofluid through a stretching/shrinking sheet with suction and thermal radiation effects is very important and useful. The problems related to hybrid nanofluid has numerous real-life and industrial applications, for example microfluidics, manufacturing, transportation, military and biomedical, etc.

In specific, this study focused on increasing thermal conductivity using a hybrid nanofluid mathematical model. This paper is able to obtain the dual solutions. To the best of author’s knowledge, this study is new and there is no previous published work similar to present study.

The purpose of this paper is to study and analyze the converging/diverging channel flow and heat transfer with the multiple slips effect, which is a development of the Jeffery–Hamel problem using the mass-based hybrid nanofluid algorithm. Whereas transferring biological liquid by arteries is a vital issue, mathematical modeling of hybrid nanofluid flow containing titanium dioxide and silver as nanoparticles and blood as base liquid through a converging/diverging duct, which can be a useful analysis for the fields of drug delivery, has been investigated.

The present approach is based on the Tiwari–Das nanofluid method. In this modeling, the volume fraction of nanoparticles is replaced with nanoparticles masses. The partial differential equations of the mass, momentum and energy conservations are changed to the system of ordinary differential equations through the similarity solution method. The final governing equations are solved by Runge–Kutta–Fehlberg procedure and shooting method.

The effect of emerging parameters on the temperature, the velocity, the Nusselt number and the skin friction have been analyzed by graphical and tabular reports. It is observed that the opposition to hybrid nanofluid flow in the attendance of particles of nonspherical shapes is more enhanced than those in the attendance of particles of spherical shapes. This issue demonstrates that the rheology of a hybrid nanofluid is dependent on the shape of particles. Besides, backflow regimes form in the divergent channel for high values of Reynolds number, m₂ and a. Indeed, this modeling for the hybrid nanofluid can be useful in different technologies and industries such as biological ones. It is worth mentioning that the excellent achievement of the mass-based algorithm for heat transfer and hybrid nanofluid flow is the most important success of this study.

The main originality is related to the development of the Jeffery–Hamel problem using the mass-based hybrid nanofluid algorithm. This new mass-based method is a single-phase hybrid nanofluid approach that the inputs are masses of nanoparticles and base liquid. Besides, considering the multiple slips effect and also pure blood as base fluid in this problem are also new.

This study aims to focus on the preparation and characterization of the silver nanowire (AgNWs), as well as their application as antimicrobial and antivirus activities either with incorporation on the waterborne coating formulation or on their own.

Prepared AgNWs are characterized by different analytical instruments, such as ultraviolet-visible spectroscope, scanning electron microscope and X-ray diffraction spectrometer. All the paint formulation's physical and mechanical qualities were tested using American Society for Testing and Materials, a worldwide standard test procedure. The biological activities of the prepared AgNWs and the waterborne coating based on AgNWs were investigated. And, their effects on pathogenic bacteria, antioxidants, antiviral activity and cytotoxicity were also investigated.

The obtained results of the physical and mechanical characteristics of the paint formulation demonstrated the formulations' greatest performance, as well as giving good scrub resistance and film durability. In the antimicrobial activity, the paint did not have any activity against bacterial pathogen, whereas the AgNWs and AgNWs with paint have similar activity against bacterial pathogen with inhibition zone range from 10 to 14 mm. The development of antioxidant and cytotoxicity activity of the paint incorporated with AgNWs were also observed. The cytopathic effects of herpes simplex virus type 1 (HSV-1) were reduced in all three investigated modes of action when compared to the positive control group (HSV-1-infected cells), suggesting that these compounds have promising antiviral activity against a wide range of viruses, including DNA and RNA viruses.

The new waterborne coating based on nanoparticles has the potential to be promising in the manufacturing and development of paints, allowing them to function to prevent the spread of microbial infection, which is exactly what the world requires at this time.