Search results

Due to the importance of quality to customers, this study considers criteria of quality and profit and optimizes both in a multi-echelon cold chain of perishable agricultural products whose quality immediately begins to deteriorate after harvest. The two objectives of the proposed cold chain are to maximize profit and quality. Since postharvest quality loss in the supply chain depends on various decisions and factors, in addition to strategic decisions, the authors consider the temperature setting in refrigerated facilities and transportation vehicles due to the unfixed shelf life of the products which is related to the temperature found by Arrhenius formula.

The authors use bi-objective mixed-integer nonlinear programming to design a four-echelon supply chain. The authors integrate the supply chain echelons to detect the sources and factors of quality loss. The four echelons include supply, processing, storage and customer. The decisions, including facility location, assigning nodes of each echelon to corresponding nodes from the adjacent echelon, allocation of vehicles to transport the products from farms to wholesalers, processing selection, and temperature setting in refrigerated facilities, are made in an integrated way. Model verification and validation in the case study are done based on three perishable herbal plants.

The model obtains a 29% profit against a total cost of 71 and 93% of original quality of the crops is maintained, indicating a 7% quality loss. The final quality of 93% is the result of making a US$6m investment in the supply chain, including the procurement of high-quality raw materials; facility establishment; high-speed, high-capacity vehicles; location assignment; processing selection and refrigeration equipment in the storage and transportation systems, helping to maximize both the final quality of the products and the total profit.

The proposed supply chain model should help managers with modeling decisions, especially when it comes to cold chains for agricultural products. The model yields these results – optimal location-allocation decisions for the facilities to minimize distances between the network nodes, which save time and maintain the majority of the products’ original quality; choosing the most appropriate processing method, which reduces the perishability rate; providing high-capacity, high-speed vehicles in the logistics system, which minimizes transportation costs and maximizes the quality; and setting the right temperature in the refrigerated facilities, which mitigates the postharvest decay reaction rate of the products.

Comparison of the results of the present research with those of the traditional chain (obtained through experts) shows that since the designed chain increases the profit as well as the final quality, it has benefits for the main chain stakeholders, which are customers of agricultural products. This study model is expected to have a positive impact on the environment by placing strong emphasis on quality and preventing excessive waste generation and air pollution by imposing a financial penalty on extra demand production.

Since profit and quality of the final product are two important factors in all cultures and communities, the proposed supply chain model can be used in any food industry around the world. Applying the proposed model induces growth in local industries and promotes the culture of prioritizing quality in societies.

To the best of the authors’ knowledge, this is the first research on a bi-objective four-echelon (supply, processing, storage and customer) postharvest supply chain for agricultural products including that integrates transportation logistics and considers the deterioration rate of products as a time-dependent variable at different levels of decision-making.

This research aims to examine the impact of friction stir processing (FSP) treatment on an aluminum alloy, especially the AD31T alloy derived from the Al-Fe-Mg-Si system. The aim is to assess the influence of different processing techniques on the microstructure and physical and mechanical characteristics of the material, with a specific focus on structural and bulk imperfections inside the stir zone (SZ).

The study demonstrates that augmenting the linear velocity of the tool within the 25–100 mm/min range results in significant enhancements. The enhancements include a decrease in the heat-affected zone (HAZ), a reduction in the extent of volume defects inside the SZ and a more uniform deformation. The microstructural analysis results are corroborated by data acquired from microhardness and electrical conductivity studies, confirming the beneficial influence of modifying the tool’s linear velocity on the material parameters.

This study provides significant observations on the changes in microstructure and the generation of flaws throughout the process of FSP of AD31T alloy. These results have practical implications for improving the characteristics of the alloy and optimizing the production conditions.

All samples exhibit a distinct reduction in electrical conductivity within the initial third of the sample, aligning with the transitional region between the base metal (BM) and the HAZ. This underscores the importance of understanding the transitional zones during FSP.

The study aims to compare and analyze the impact of the commonly used pallets (wooden pallet and plastic pallets), using life cycle assessment (LCA), then provide certain suggestions for the development of green packaging.

In this study, software Simapro was used to calculate and analyze the whole life cycle of pallets from the stage of raw materials and production to processing and waste disposal.

A total of 12 environmental categories were used to quantitatively analyze the environmental impact of the four different pallets. The results showed that, regardless of raw material, processing, or waste stage, the environmental impact of wooden pallet was lower than that of plastic pallet. Wooden pallet was better than plastic pallets.

This study compared and analyzed the pallet of 1 × 1.2m with different materials.

Green packaging is the development trend of the future packaging, which follows the principle of 3R1D. According to the calculation results, corresponding suggestions can be put forward from production, processing, using, wasting and other aspects, and make corresponding contributions to the development of green packaging.

The contribution and impact of each stage of the product on the environment can be studied. The environmental impact, such as global warming potential, water scarcity, can be reduced through different solutions such as the use of green materials, good processing techniques and higher recycling rates.

This study aims to determine the best way to apply material flow cost accounting (MFCA) in an SME environment with the goal of visualizing negative product cost during the manufacturing process and pinpointing places where improvements can be made.

This study uses a case study approach to demonstrate the usefulness of the MFCA tool in an SME in India that produces aluminum energy products used in the electrical power sector through gravity die casting.

According to the results, the company’s gravity die casting has a negative product cost margin of 27.38% as a result of MFCA analysis. It is also determined that the negative material cost is Rs. 22,919, the negative system cost is Rs. 462 and the negative energy cost is Rs. 1,069 for processing 300 kg of raw material. The typical monthly raw material processing for this company is 45,000 kg.

This research shows that MFCA’s implementation will improve the company’s environmental consciousness and bottom line. To the best of the authors’ knowledge, this study is the first to implement MFCA in aluminum gravity die casting of electrical parts manufacturing.

Utilizing electrical discharge machining (EDM) to process micro-holes in superalloys may lead to the formation of remelting layers and micro-cracks on the machined surface. This work proposes a method of composite processing of EDM and ultrasonic vibration drilling for machining precision micro-holes in complex positions of superalloys.

A six-axis computer numerical control (CNC) machine tool was developed, whose software control system adopted a real-time control architecture that integrates electrical discharge and ultrasonic vibration drilling. Among them, the CNC system software was developed based on Windows + RTX architecture, which could process the real-time processing state received by the hardware terminal and adjust the processing state. Based on the SoC (System on Chip) technology, an architecture for a pulse generator was developed. The circuit of the pulse generator was designed and implemented. Additionally, a composite mechanical system was engineered for both drilling and EDM. Two sets of control boards were designed for the hardware terminal. One set was the EDM discharge control board, which detected the discharge state and provided the pulse waveform for turning on the transistor. The other was a relay control card based on STM32, which could meet the switch between EDM and ultrasonic vibration, and used the Modbus protocol to communicate with the machining control software.

The mechanical structure of the designed composite machine tool can effectively avoid interference between the EDM spindle and the drilling spindle. The removal rate of the remelting layer on 1.5 mm single crystal superalloys after composite processing can reach over 90%. The average processing time per millimeter was 55 s, and the measured inner surface roughness of the hole was less than 1.6 µm, which realized the  micro-hole machining without remelting layer, heat affected zone and micro-cracks in the single crystal superalloy.

The test results proved that the key techniques developed in this paper were suite for micro-hole machining of special materials.

The aim of this paper is to study the effect of laser shock peening (LSP) on mechanical behaviour of the laser-directed energy deposition (LDED)-based printed 15-5 PH stainless steel with U and V notches. The study specifically concentrates on the evaluation of effect of scan strategy, machining and LSP processing on microstructural, texture evolution and fatigue behaviour of LDED-printed 15-5 PH steel.

For LSP treatment, 15-5 PH steel was printed using LDED process with bidirectional scanning strategy (XX [θ = 0°) and XY [θ = 90°]) at optimised laser power of 600 W with a scanning speed of 300 mm/min and a powder feed rate of 3 g/min. Furthermore, LSP treatment was conducted on the V- and U-notched fatigue specimens extracted from LDED-built samples at laser energy of 3.5 J with a pulse width of 10 ns using laser spot diameter of 3 mm. Post to the LSP treatment, the surface roughness, fatigue life assessment and microstructural evolution analysis is performed. For this, different advanced characterisation techniques are used, such as scanning electron microscopy attached with electron backscatter diffraction for microstructure and texture, X-ray diffraction for residual stress (RS) and structure information, Vicker’s hardness tester for microhardness and universal testing machine for low-cycle fatigue.

It is observed that both scanning strategies during the LDED printing of 15-5 PH steel and laser peening have played significant role in fatigue life. Specimens with the XY printing strategy shows higher fatigue life as compared to XX with both U- and V-notched conditions. Furthermore, machining and LSP treatment led to a significant improvement of fatigue life for both scanning strategies with U and V notches. The extent of increase in fatigue life for both XX and XY scanning strategy with V notch is found to be higher than U notch after LSP treatment, though without LSP samples with U notch have a higher fatigue life. As fabricated sample is found to have the lowest fatigue life as compared to machines and laser peened with both scan strategies.

This study presents an innovative method to improve the fatigue life of 15-5 PH stainless steel by changing the microstructure, texture and RS with the adoption of a suitable scanning strategy, machining and LSP treatment as post-processing. The combination of preferred microstructure and compressive RS in LDED-printed 15-5 PH stainless steel achieved with a synergy between microstructure and RS, which is responsible to improve the fatigue life. This can be adopted for the futuristic application of LDED-printed 15-5 PH stainless steel for different applications in aerospace and other industries.

The purpose of this paper is to compile a comprehensive status report on pipes/piping networks across different industrial sectors, along with specifications of materials and sizes, and showcase welding avenues. It further extends to highlight the promising friction stir welding as a single solid-state pipe welding procedure. This paper will enable all piping, welding and friction stir welding stakeholders to identify scope for their engagement in a single window.

The paper is a review paper, and it is mainly structured around sections on materials, sizes and standards for pipes in different sectors and the current welding practice for joining pipe and pipe connections; on the process and principle of friction stir welding (FSW) for pipes; identification of main welding process parameters for the FSW of pipes; effects of process parameters; and a well-carved-out concluding summary.

A well-carved-out concluding summary of extracts from thoroughly studied research is presented in a structured way in which the avenues for the engagement of FSW are identified.

The implications of the research are far-reaching. The FSW is currently expanding very fast in the welding of flat surfaces and has evolved into a vast number of variants because of its advantages and versatility. The application of FSW is coming up late but catching up fast, and as a late starter, the outcomes of such a review paper may support stake holders to expand the application of this process from pipe welding to pipe manufacturing, cladding and other high-end applications. Because the process is inherently inclined towards automation, its throughput rate is high and it does not need any consumables, the ultimate benefit can be passed on to the industry in terms of financial gains.

To the best of the authors’ knowledge, this is the only review exclusively for the friction stir welding of pipes with a well-organized piping specification detailed about industrial sectors. The current pipe welding practice in each sector has been presented, and the avenues for engaging FSW have been highlighted. The FSW pipe process parameters are characteristically distinguished from the conventional FSW, and the effects of the process parameters have been presented. The summary is concise yet comprehensive and organized in a structured manner.

For additive manufacturing (AM) through laser-based powder bed fusion of polymers (PBF-LB/P), accurate characterization of powder flowability is vital for achieving high-quality parts. However, accurately characterizing feedstock flowability presents challenges because of a lack of consensus on which tests to perform and the diverse forces and mechanisms involved. This study aims to undertake a thorough investigation into the flowability of eight feedstock materials for PBF-LB/P at different temperatures using various techniques.

For ambient temperature assessments, established metrics such as avalanche angle and Hausner ratio, along with the approximated flow function coefficient (FFC_app), are used. The study then focuses on the influence of elevated temperatures representative of in-process conditions. FFC_app and differential scanning calorimetry (DSC) are performed and analyzed, followed by a correlation analysis as a holistic approach to identify key aspects for flowability. Furthermore, two feedstock materials are compared with a previous study to connect the present findings to PBF-LB/P processing.

The study revealed intrinsic material properties such as mechanical softening near the melting point to become significant. This partially explains why certain powders with poor ambient temperature flowability are consistently demonstrated to produce high-quality parts. FFC_app and thermal characterization through DSC are identified as critical metrics for optimizing feedstock material characteristics across temperature ranges.

Previous studies emphasized specific characterizations of feedstock material at ambient temperature, presented a limited materials selection or focused on metrics such as shape factors. In contrast, this study addresses a partially understood aspect by examining the critical role of temperature in governing feedstock material flowability. It advocates for the inclusion of temperature variables in flowability analyses to closely resemble the PBF-LB/P process, which can be applied to material design, selection and process optimization.

This study aims to compare and analyze the impact of the commonly used takeout packing (Kraft paper bowl and plastic bowl) through life cycle assessment, then certain suggestions for the development of green packaging could be provided.

In this study, Simapro software was used to calculate and analyze the whole life cycle of takeout packaging from the stage of raw materials, production and processing and waste disposal.

Twelve environmental categories were used to quantitatively analyze the environmental impact of the two different bowls. The results showed that the impact of Kraft paper bowl on the environment was less than that of plastic bowl, regardless of raw material, processing or waste stage. Kraft paper bowl was better than plastic bowl.

This study compared and analyzed the progress of 750-mL bowls made with different materials and specific specifications.

Green packaging is the development trend of the future packaging and follows the principle of reduce, resue, recycle, degradable. According to the calculation results, corresponding suggestions can be put forward from production, processing, use, waste and other aspects, and make corresponding contributions to the development of green packaging.

The contribution and impact of each stage of the product on the environment can be studied. The environmental impacts, such as global warming potential and water scarcity, can be reduced through different solutions, such as the use of green materials, good processing techniques and higher recycling rates.

Material extrusion (ME) is a low-cost additive manufacturing (AM) technique that is capable of producing metallic components using desktop 3D printers through a three-step printing, debinding and sintering process to obtain fully dense metallic parts. However, research on ME AM, specifically fused filament fabrication (FFF) of 316L SS, has mainly focused on improving densification and mechanical properties during the post-printing stage; sintering parameters. Therefore, this study aims to investigate the effect of varying processing parameters during the initial printing stage, specifically nozzle temperatures, T_n (190°C–300°C) on the relative density, porosity, microstructures and microhardness of FFF 3D printed 316L SS.

Cube samples (25 x 25 x 25 mm) are printed via a low-cost Artillery Sidewinder X1 3D printer using a 316L SS filament comprising of metal-polymer binder mix by varying nozzle temperatures from 190 to 300°C. All samples are subjected to thermal debinding and sintering processes. The relative density of the sintered parts is determined based on the Archimedes Principle. Microscopy and analytical methods are conducted to evaluate the microstructures and phase compositions. Vickers microhardness (HV) measurements are used to assess the mechanical property. Finally, the correlation between relative density, microstructures and hardness is also reported.

The results from this study suggest a suitable temperature range of 195°C–205°C for the successful printing of 316L SS green parts with high dimensional accuracy. On the other hand, T_n = 200°C yields the highest relative density (97.6%) and highest hardness (292HV) in the sintered part, owing to the lowest porosity content (<3%) and the combination of the finest average grain size (∼47 µm) and the presence of Cr23C6 precipitates. However, increasing T_n = 205°C results in increased porosity percentage and grain coarsening, thereby reducing the HV values. Overall, these outcomes suggest that the microstructures and properties of sintered 316L SS parts fabricated by FFF AM could be significantly influenced even by adjusting the processing parameters during the initial printing stage only.

This paper addresses the gap by investigating the impact of initial FFF 3D printing parameters, particularly nozzle temperature, on the microstructures and physical characteristics of sintered FFF 316L SS parts. This study provides an understanding of the correlation between nozzle temperature and various factors such as dimensional integrity, densification level, microstructure and hardness of the fabricated parts.