Search results
1 – 10 of over 5000G. Cauffet, J.L. Coulomb, S. Guerin, O. Chadebec and Y. Vuillermet
This paper aims to present the use of magnetic gradient, and magnetic potential measurements in the specific case of magnetization identification for a thin sheet. Usually…
Abstract
Purpose
This paper aims to present the use of magnetic gradient, and magnetic potential measurements in the specific case of magnetization identification for a thin sheet. Usually, induction measurements are only used.
Design/methodology/approach
After a brief description of the magnetic gradient and magnetic scalar potential notions, methods to calculate them are presented and validated. These two kinds of measurements are tested for a numerical identification case. Then, virtual measurements can be generated and used for inverse problem resolution. Advantages of using induction, magnetic gradient or magnetic potential measurements are then discussed.
Findings
A previous method to solve inverse problem based on induction measurement has been increased by the capability of using other kind of measurements. A numerical approach has allowed to validate the use of magnetic gradient or magnetic scalar potential measurement as information sources.
Originality/value
Usually, induction measurements are only used. Inversion resolution using other kind of measurements than the induction can be made. An experimental validation has been done for gradient measurements.
Details
Keywords
P. Bettini, A. Formisano, R. Martone, F. Trevisan and A. Stella
The identification of plasma parameters from different sets of measurements is a key topic in the thermonuclear fusion research. Most of the information relevant to the plasma…
Abstract
The identification of plasma parameters from different sets of measurements is a key topic in the thermonuclear fusion research. Most of the information relevant to the plasma shape and position control is usually gained via external magnetic measurements, but information related to internal distribution of current density is not accessible in this way. Other possible measurements are available. In this paper a performance analysis is done with respect to the adoption of polarimetric measurements.
Details
Keywords
Yongjian Li, Kai Zhang, Yu Dou, Zhiwei Lin, Yu Fu and Changgeng Zhang
In rotational alternating current machines, interlocking is a commonly used manufacturing method to fix laminated silicon steel cores. The purpose of this study is to measure the…
Abstract
Purpose
In rotational alternating current machines, interlocking is a commonly used manufacturing method to fix laminated silicon steel cores. The purpose of this study is to measure the localized magnetic properties more comprehensively and to analyze the deteriorated magnetic properties caused by interlocking more accurately.
Design/methodology/approach
A movable B–H sensor is designed in this paper. The localized magnetic properties measurement was performed to investigate the magnetic properties around the interlocks with various sizes, various orientations and various numbers of laminations. Then, the damaged area caused by the interlocking was quantified, and the magnetic degradation of different degrees is layered.
Findings
The measurement results have shown that the interlocks with larger sizes, along the transverse direction and on 10-layer laminate, will lead to more serious magnetic degradation, and the maximum loss increment can reach up to 70%.
Originality/value
This work is an improvement and optimization based on the previous overall magnetic measurement of the interlock. The quantitative results of the localized magnetic measurement will have a certain significance for the accurate modeling and simulation of the electrical machines and provide valuable guidance for the optimization of the actual production process of the motor.
Details
Keywords
Magnetization is one of the most important parameters of magnetic fluids. The shape of the magnetization curve often determines the application of a fluid in a device. On the…
Abstract
Purpose
Magnetization is one of the most important parameters of magnetic fluids. The shape of the magnetization curve often determines the application of a fluid in a device. On the basis of the magnetization curve, it is also possible to estimate, for example, the distribution and size of the particles in a magnetic fluid carrier fluid. The aim of this paper is to present a new approach for estimating the magnetization curve.
Design/methodology/approach
The proposed method is an iterative method based on the measurement of magnetic induction on a test stand. To determine the magnetization curve, a numerical simulation of the magnetic field distributions for the preliminary magnetization curve should also be performed. Numerical simulations for modified forms of the magnetization curve are performed until the difference between the results obtained by the measurement and numerical simulation are the smallest.
Findings
This paper presents the results of magnetization curve research for ferrofluids and magnetorheological fluids.
Originality/value
The discussed method shows the possibilities of using numerical simulations of magnetic field distribution to determine the magnetic properties of magnetic fluids. This method may be an alternative for estimating the magnetization curve of the magnetic fluid compared to other methods.
Details
Keywords
Benedikt Schauerte, Martin Marco Nell, Tim Brimmers, Nora Leuning and Kay Hameyer
The magnetic characterization of electrical steel is typically examined by measurements under the condition of unidirectional sinusoidal flux density at different magnetization…
Abstract
Purpose
The magnetic characterization of electrical steel is typically examined by measurements under the condition of unidirectional sinusoidal flux density at different magnetization frequencies. A variety of iron loss models were developed and parametrized for these standardized unidirectional iron loss measurements. In the magnetic cross section of rotating electrical machines, the spatial magnetic flux density loci and with them the resulting iron losses vary significantly from these unidirectional cases. For a better recreation of the measured behavior extended iron loss models that consider the effects of rotational magnetization have to be developed and compared to the measured material behavior. The aim of this study is the adaptation, parametrization and validation of an iron loss model considering the spatial flux density loci is presented and validated with measurements of circular and elliptical magnetizations.
Design/methodology/approach
The proposed iron loss model allows the calculation and separation of the different iron loss components based on the measured iron loss for different spatial magnetization loci. The separation is performed in analogy to the conventional iron loss calculation approach designed for the recreation of the iron losses measured under unidirectional, one-dimensional measurements. The phenomenological behavior for rotating magnetization loci is considered by the formulation of the different iron loss components as a function of the maximum magnetic flux density Bm, axis ratio fAx, angle to the rolling direction (RD) θ and magnetization frequency f.
Findings
The proposed formulation for the calculation of rotating iron loss is able to recreate the complicated interdependencies between the different iron loss components and the respective spatial magnetic flux loci. The model can be easily implemented in the finite element analysis of rotating electrical machines, leading to good agreement between the theoretically expected behavior and the actual output of the iron loss calculation at different geometric locations in the magnetic cross section of rotating electrical machines.
Originality/value
Based on conventional one-dimensional iron loss separation approaches and previously performed extensions for rotational magnetization, the terms for the consideration of vectorial unidirectional, elliptical and circular flux density loci are adjusted and compared to the performed rotational measurement. The presented approach for the mathematical formulation of the iron loss model also allows the parametrization of the different iron loss components by unidirectional measurements performed in different directions to the RD on conventional one-dimensional measurement topologies such as the Epstein frames and single sheet testers.
Details
Keywords
The paper presents the analysis of magnetic field that surrounds the power transformer after it has been switched off. The purpose of this paper is to determine the possibility of…
Abstract
Purpose
The paper presents the analysis of magnetic field that surrounds the power transformer after it has been switched off. The purpose of this paper is to determine the possibility of defining the residual fluxes in the legs of the transformer based on the measurement of this field. It was also intended to determine the type and the location of magnetic sensors.
Design/methodology/approach
Numerical analysis of the magnetic field was performed. A three-dimensional model of the transformer’s magnetic core was created in the Flux 3D simulation program. The analysis was concerned with an oil-filled transformer and a dry transformer. The magnetic field of Earth was taken into account.
Findings
The research has shown that magnetic induction of the leakage field produced by residual magnetization of the core is comparable to the magnetic induction of the Earth’s field. It was also found that the measurement of the magnetic induction should be performed as close as possible to the core. The interior of the tank turned out to be a convenient space for the placement of the sensors.
Research limitations/implications
The influence of external ferromagnetic objects, and devices generating magnetic field, on the measurement was not considered. It should be taken into account in the future work.
Originality/value
On the basis of the analysis, it was proposed to measure the magnetic induction vector of the leakage field at three points. The sensors should be placed in front of the columns at a position that is half of their height. The measurement can be performed with satisfactory accuracy by sensors located on the surface of the windings.
Details
Keywords
Jan Karthaus, Silas Elfgen and Kay Hameyer
Magnetic properties of electrical steel are affected by mechanical stress. In electrical machines, influences because of manufacturing and assembling and because of operation…
Abstract
Purpose
Magnetic properties of electrical steel are affected by mechanical stress. In electrical machines, influences because of manufacturing and assembling and because of operation cause a mechanical stress distribution inside the steel lamination. The purpose of this study is to analyse the local mechanical stress distribution and its consequences for the magnetic properties which must be considered when designing electrical machines.
Design/methodology/approach
In this paper, an approach for modelling stress-dependent magnetic material properties such as magnetic flux density using a continuous local material model is presented.
Findings
The presented model shows a good approximation to measurement results for mechanical tensile stress up to 100 MPa for the studied material.
Originality/value
The presented model allows a simple determination of model parameters by using stress-dependent magnetic material measurements. The model can also be used to determine a scalar mechanical stress distribution by using a known magnetic flux density distribution.
Details
Keywords
James Elgy, Paul D. Ledger, John L. Davidson, Toykan Özdeğer and Anthony J. Peyton
The ability to characterise highly conducting objects, that may also be highly magnetic, by the complex symmetric rank–2 magnetic polarizability tensor (MPT) is important for…
Abstract
Purpose
The ability to characterise highly conducting objects, that may also be highly magnetic, by the complex symmetric rank–2 magnetic polarizability tensor (MPT) is important for metal detection applications including discriminating between threat and non-threat objects in security screening, identifying unexploded anti-personnel landmines and ordnance and identifying metals of high commercial value in scrap sorting. Many everyday non-threat items have both a large electrical conductivity and a magnetic behaviour, which, for sufficiently weak fields and the frequencies of interest, can be modelled by a high relative magnetic permeability. This paper aims to discuss the aforementioned idea.
Design/methodology/approach
The numerical simulation of the MPT for everyday non-threat highly conducting magnetic objects over a broad range of frequencies is challenging due to the resulting thin skin depths. The authors address this by employing higher order edge finite element discretisations based on unstructured meshes of tetrahedral elements with the addition of thin layers of prismatic elements. Furthermore, computer aided design (CAD) geometrical models of the non-threat and threat object are often not available and, instead, the authors extract the geometrical features of an object from an imaging procedure.
Findings
The authors obtain accurate numerical MPT characterisations that are in close agreement with experimental measurements for realistic physical objects. The assessment of uncertainty shows the impact of geometrical and material parameter uncertainties on the computational results.
Originality/value
The authors present novel computations and measurements of MPT characterisations of realistic objects made of magnetic materials. A novel assessment of uncertainty in the numerical predictions of MPT characterisations for uncertain geometry and material parameters is included.
Details
Keywords
Discusses the 27 papers in ISEF 1999 Proceedings on the subject of electromagnetisms. States the groups of papers cover such subjects within the discipline as: induction machines;…
Abstract
Discusses the 27 papers in ISEF 1999 Proceedings on the subject of electromagnetisms. States the groups of papers cover such subjects within the discipline as: induction machines; reluctance motors; PM motors; transformers and reactors; and special problems and applications. Debates all of these in great detail and itemizes each with greater in‐depth discussion of the various technical applications and areas. Concludes that the recommendations made should be adhered to.
Details
Keywords
Kevin McMeekin, Frédéric Sirois, Maxime Tousignant and Philippe Bocher
Surface heat treatment by induction heating (10-100 kHz) requires precise prediction and control of the depth of the induced phase transformation. This paper aims at identifying…
Abstract
Purpose
Surface heat treatment by induction heating (10-100 kHz) requires precise prediction and control of the depth of the induced phase transformation. This paper aims at identifying common issues with the measurement and modeling of magnetic properties used in induction heating simulations, and it proposes ways to improve the situation.
Design/methodology/approach
In particular, it is demonstrated how intrinsic magnetic properties (i.e. the B-H curve) of a sample can change during the magnetic characterization process itself, due to involuntary annealing of the sample. Then, for a B-H curve that is supposed perfectly known, a comparison is performed between multiple models, each one representing the magnetic properties of steel in time-harmonic (TH) finite element method simulations. Finally, a new model called “power-equivalent model” is proposed. This model provides the best possible accuracy for a known nonlinear and hysteretic B-H curve used in TH simulations.
Findings
By carefully following the guidelines identified in this paper, reduction of errors in the range of 5-10 per cent can be achieved, both at the experimental and modeling levels. The new “power-equivalent model” proposed is also expected to be more generic than existing models.
Originality/value
This paper highlights common pitfalls in the measurement and modeling of magnetic properties, and suggests ways to improve the situation.
Details