Search results

The effect of magnetic field dependent (MFD) viscosity on the onset of convection in a ferromagnetic fluid layer heated from below saturating rotating porous medium in the presence of vertical magnetic field is investigated theoretically by using Darcy model. The resulting eigen value problem is solved using the regular perturbation technique. Both stationary and oscillatory instabilities have been obtained. It is found that increase in MFD viscosity and increase in magnetic Rayleigh number is to delay the onset of ferroconvection, while the nonlinearity of fluid magnetization has no influence on the stability of the system.

The thermal perturbation method is employed for analytical solution. A theory of linear stability analysis and normal mode technique have been carried out to analyze the onset of convection for a fluid layer contained between two impermeable boundaries for which an exact solution is obtained.

The conditions for the system to stabilize both by stationary and oscillatory modes are studied. Even for the oscillatory system of particular frequency dictated by physical conditions, the critical Rayleigh numbers for oscillatory mode of the system were found to be greater than for the stationary mode. The system gets destabilized for various physical parameters only through stationary mode. Hence, the analysis is restricted to the stationary mode. To the Coriolis force, the Taylor number T_a is calculated to discuss the results. It is found that the system stabilizes through stationary mode for values of and for oscillatory instability is favored for Ta > 104. Therefore the Taylor number T_a leads to stability of the system. For larger rotation, magnetization leads to destabilization of the system. The MFD viscosity is found to stabilize the system.

This research paper is new and original.

The aim of the present study is to examine the ferrohydrodynamic laminar boundary layer flow of electrically non-conducting magnetic fluid on a uniformly heated and radially stretchable disk with or without rotation in the presence of an externally applied magnetic field.

Governing equations give rise to highly non-linear coupled partial differential equations which are reduced to a set of ordinary differential equations in dimensionless form by the means of conventional similarity transformation. These equations are further discretized using central finite difference scheme. And, the solution is obtained in MATLAB environment by finding the missing boundary conditions using shooting method.

The effects of magnetic field dependent viscosity and rotation strength parameter on velocity and temperature profiles are investigated. Besides, the other significant physical quantities such as radial and tangential skin frictions, rate of heat transfer and boundary layer displacement thickness are also computed. The obtained results are discussed quantitatively and qualitatively.

Heat transfer in ferrofluid flow over a radially stretchable and uniformly heated rotating disk has not been investigated yet.

Thermoconvective instability with Soret effect in multi-component fluids has wide range of applications in heat and mass transfer. This work deals with the theoretical investigation of the effect of magnetic field dependent (MFD) viscosity on Soret-driven ferrothermohaline convection heated and salted from below in an anisotropic porous medium subjected to a transverse uniform magnetic field. The resulting eigen value problem is solved using Brinkman model. An exact solution is obtained for the case of two free boundaries and the stationary and oscillatory instabilities are investigated by using linear stability analysis and normal mode technique for the vertical of anisotropic porous medium. The analysis has been made for different parameters like porosity, anisotropy, ratio of heat transport to mass transport, buoyancy magnetization, non-buoyancy magnetization, Soret parameter and Salinity Rayleigh number. The effect of MFD viscosity is assumed to be isotropy. It is found that the presence of MFD viscosity has a stabilizing effect, whereas magnetization has a destabilizing effect.

The purpose of this paper is to study the influence of magnetic field on entropy generation and natural convection inside an enclosure filled with a hybrid nanofluid and having a conducting wavy solid block. Also, the effect of fluid–solid thermal conductivity ratio is investigated.

The governing equations that are formulated in the dimensionless form are discretized via finite volume method. The velocity–pressure coupling is assured by the SIMPLE algorithm. Heat transfer balance is used to verify the convergence. The validation of the numerical results was performed by comparing qualitatively and quantitatively the results with previously published investigations.

The results indicate that the magnetic field and the conductivity ratio of the wavy solid block can significantly affect the dynamic and thermal field and, consequently, the heat transfer rate and entropy generation because of heat transfer, fluid friction and magnetic force.

To the best of the authors’ knowledge, the present numerical study is the first attempt to use hybrid nanofluid for studying the entropy generation because of magnetohydrodynamic natural convective flow in a square cavity with the presence of a wavy circular conductive cylinder. Irreversibilities due to magnetic effect are taken into account. The effect of fluid–solid thermal conductivity ratio is considered.

This study aims to focus on second grade fluid flow over a rotating disk in the presence of chemical reaction. Uniform magnetic field is also taken into account. Because of the smaller magnetic Reynolds number, induced magnetic field is negligible. Heat equation is constructed by considering heat source/sink.

Suitable variables are used to transform nonlinear partial differential equations to ordinary ones. Convergent series solutions are attained by applying homotopy analysis method.

Trends of different parameters on concentration, velocity and temperature are shown graphically. Skin friction coefficient and local Nusselt number are calculated and investigated under the effect of elaborated parameters. An elevation in the value of magnetic field parameter causes collapse in the velocity distributions. Velocity distribution in increasing function of viscoelastic parameter. Temperature and concentration profiles are decreasing functions of viscoelastic parameter. Concentration distribution reduces by increasing the chemical reaction parameter. There is more surface drag force for larger M, while opposite behavior is noted for β.

To the best of the authors’ knowledge, such consideration is yet to be published in the literature.

The purpose of this paper is to study the natural convection and radiation heat transfer inside Nonagon inclined cavity with variable heated source length, which contains a porous medium saturated with nanofluid in the presence of uniform heat generation or absorption under the effect of uniform magnetic field with variable direction. The shape factor of nano particles is taking account for the model of nanofluid.

This study is established in two-dimensional space. The 2D numerical study is effectuated with Comsol Multiphysics based on the on the finite element method. The 2D equation system is exposed on dimensionless form taking into account the boundary conditions.

Results obtained show that the convection heat transfer is ameliorated with the augmentation of heated source length. The convection heat transfer is enhanced by increasing Rayleigh, Darcy numbers and the heated source length; however, it is reduced by rising Hartmann number. The presence of radiation parameter lead to improve the convection heat transfer in the presence of both uniform heat generation/absorption. The average Nusselt number reaches a maximum for an inclination of cavity γ = 45° and a minimum for γ = 60°. Both the increase of the shape factor of nano particles and the solid fraction of nano particles improve the convection heat transfer.

Different studies have been realized to study the heat transfer inside cavity contains porous medium saturated with nanofluid under magnetic field effect. In this work, the Nonagon geometric of cavity studied has never been studied. In addition, the effect of radiation parameter with relation of the shape factor of nanoparticles in the presence of uniform heat generation/absorption on the heat transfer performance have never been investigated. Also, the effect of magnetic field direction with relation of the inclination cavity on heat transfer performance.

This study aims to numerically scrutinize the entropy generation minimization and mixed convective heat transfer of multi-walled carbon nanotubes–Fe₃O₄/water hybrid nanofluid flow in a lid-driven square enclosure with heat generation in the presence of a porous layer on inner surfaces, considering local thermal non-equilibrium (LTNE) approach and the non-Darcy flow model.

The dimensionless governing equations for hybrid nanofluid and solid phases are solved by applying the finite volume method and semi-implicit method for pressure-linked equations algorithm.

The roles of the internal heat generation in the porous layer, LTNE model and nanoparticles volume fraction on mixed convection phenomenon and entropy generation are introduced for lid-driven cavity hybrid nanofluid flow. Based on the investigation of entropy generation and heat transfer, the minimum total entropy generation and average Nusselt numbers are found at 1 ≤ Ri ≤ 10 where the effect of the forced and free convection flow directions being opposite each other is very significant. When considering various nanoparticle volume fractions, it becomes evident that the minimum entropy generation occurs in the case of φ = 0.1%. The outcomes of LTNE number reveal the operating parameters in which thermal equilibrium occurs between hybrid nanofluid and solid phases.

The analysis of entropy generation under various shear and buoyancy forces plays a significant role in the suitable thermal design and optimization of mixed convective heat transfer applications. This research significantly contributes to the optimization of design and the advancement of innovative solutions across diverse engineering disciplines, such as packed-bed thermal energy storage and thermal insulation.

This paper aims to traitted the combined effects of ferromagnetic particles and magnetic field on mixed convection in the Falkner Skan equation using analytical solution by the Duan–Rach method.

Visualization and grouping of effects of various physical parameters such as electrical conductivity of ferro-particles (electrical conductivity calculated using Maxwell model), ferro fluid volume fraction for Magnetite-Fe₃O₄-water and magnetic field represented by the Hartmann number in a set of third- and second-order nonlinear coupled ordinary differential equations. This set of equations is analytically processed using the Duan–Rach Approach (DRA).

Obtained DRA results are validated using a numerical solution (Runge–Kutta–Fehlberg-based shooting method). The main objective of this research is to analyze the influence of physical parameters, in particular electrical conductivity, Ferrofluid volume fraction in the case of Magnetite-Fe₃O₄-water, in addition to the types of solid nanoparticles and Hartmann number on dynamic and thermal distributions (velocity/temperature). Results of the comparison between the numerical solution (Runge–Kutta–Fehlberg-based shooting method) and the analytical solution (DRA) show that the DRA data are in good agreement with numerical data and available literature.

The study uses Runge–Kutta–Fehlberg-based shooting method) and the analytical solution (DRA) to investigate the effect of mixed convection, in the presence of Ferro particles (Magnetite-Fe₃O₄) in a basic fluid (water for example) and subjected to an external magnetic field on the Falkner–Skan system.

The purpose of this paper is to perform numerical simulations based on the incompressible smoothed particle hydrodynamics (ISPH) method for thermo-diffusion convection in a hexagonal-shaped cavity saturated by a porous medium and suspended by a nano-encapsulated phase change material (NEPCM). Here, the solid particles are inserted into a phase change material to enhance its thermal performance.

Superellipse rotated shapes with variable lengths are embedded inside a hexagonal-shaped cavity. These inner shapes are rotated around their center by a uniform circular velocity and their conditions are positioned at high temperature and concentration. The controlling equations in a non-dimensional form were analyzed by using the ISPH method. At first, the validation of the ISPH results is performed. Afterward, the implications of a fusion temperature, lengths/types of the superellipse shapes, nanoparticles parameter and time parameter on the phase change heat transfer, isotherms, isoconcentration and streamlines were addressed.

The achieved simulations indicated that the excess in the length of an inner superellipse shape augments the temperature, concentration and maximum of the streamlines in a hexagonal-shaped cavity. The largest values of mean Nusselt number are attained at the inner rhombus shape with convex (n = 1.5) and the largest values of mean Sherwood number are attained at the inner rectangle shape with rounded corners (n = 4).

The ISPH method is developed to emulate the influences of the uniform rotation of the novel geometry shapes on heat/mass transport inside a hexagonal-shaped cavity suspended by NEPCM and saturated by porous media.

The purpose of this paper is to study flow of the Marangoni boundary layer pasta surface embedded in a porous medium saturated by a hybrid nanofluid in the presence of a magnetic field and thermal radiation.

The governing model was converted into ordinary differential equations applying proper similarity transformations. Therefore, Laplace transform was used to exactly solve the resulted equations. Hence, the influence of the velocity profile and temperature distribution was investigated under impacts of the involved parameters.

In the case of regular fluid, i.e. the solid volume fractions are zeros, the current results are in a very good agreement with those in the literature. It was found that the velocity decreases (increases) on increasing the parameters of copper-nanoparticles volume fraction, magnetic field and suction (permeability and injection). Further, the temperature increases (decreases) with an increase of the copper-nanoparticles volume fraction, magnetic field, injection and radiation (permeability and suction).

The current results of the Marangoni boundary layer problem for hybrid nanofluids are new, original and extend the previous problems investigated by many authors for the case of regular/nano fluids.