Search results

The purpose of this paper is to develop a coupled lattice Boltzmann model for the simulation of the freezing process in unsaturated porous media.

In the developed model, the porous structure with complexity and disorder was generated by using a stochastic growth method, and then the Shan-Chen multiphase model and enthalpy-based phase change model were coupled by introducing a freezing interface force to describe the variation of phase interface. The pore size of porous media in freezing process was considered as an influential factor to phase transition temperature, and the variation of the interfacial force formed with phase change on the interface was described.

The larger porosity (0.2 and 0.8) will enlarge the unfrozen area from 42 mm to 70 mm, and the rest space of porous medium was occupied by the solid particles. The larger specific surface area (0.168 and 0.315) has a more fluctuated volume fraction distribution.

The concept of interfacial force was first introduced in the solid–liquid phase transition to describe the freezing process of frozen soil, enabling the formulation of a distribution equation based on enthalpy to depict the changes in the water film. The increased interfacial force serves to diminish ice formation and effectively absorb air during the freezing process. A greater surface area enhances the ability to counteract liquid migration.

This paper aims to contribute to the performance improvement and the broader application of hot-dip galvanized coating.

First, the ability to provide barrier protection, galvanic protection, and corrosion product protection provided by hot-dip galvanized coating is introduced. Then, according to the varying Fe content, the growth process of each sublayer within the hot-dip galvanized coating, as well as their respective microstructures and physical properties, is presented. Finally, the electrochemical corrosion behaviors of the different sublayers are analyzed.

The hot-dip galvanized coating is composed of η-Zn sublayer, ζ-FeZn13 sublayer, δ-FeZn10 sublayer, and Γ-Fe3Zn10 sublayer. Among these sublayers, with the increase in Fe content, the corrosion potential moves in a noble direction.

There is a lack of research on the corrosion behavior of each sublayer of hot-dip galvanized coating in different electrolytes.

It provides theoretical guidance for the microstructure control and performance improvement of hot-dip galvanized coatings.

The formation mechanism, coating properties, and corrosion behavior of different sublayers in hot-dip galvanized coating are expounded, which offers novel insights and directions for future research.

The purpose of this paper is to explore the operating characteristics of gallium-based liquid metals (GLMs) by directly adding them as lubricants in real mechanical equipment.

This paper conducts an analysis of the rotor-bearing system under GLM lubrication using a constructed test rig, focusing on vibration signals, surface characteristics of the friction pair, contact resistance and temperature rise features.

The study reveals that GLM can effectively improve the lubrication condition of the tribo-pair, leading to a more stable vibration signal in the system. Surface analysis demonstrates that GLM can protect the sample surface from wear, and phase separation occurs during the experimental process. Test results of contact resistance indicate that, in addition to enhancing the interfacial conductivity, GLM also generates a fluid dynamic pressure effect. The high thermal conductivity and anti-wear effects of GLM can reduce the temperature rise of the tribo-pair, but precautions should be taken to prevent oxidation and the loss of its fluidity.

The overall operating characteristics of the rotor-bearing system under GLM lubrication were investigated to provide new ideas for the lubrication of the rotor-bearing system.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-03-2024-0067/

Thermal energy storage systems use thermal energy to elevate the temperature of a storage substance, enabling the release of energy during a discharge cycle. The storage or retrieval of energy occurs through the heating or cooling of either a liquid or a solid, without undergoing a phase change, within a sensible heat storage system. In a sensible packed bed thermal energy storage system, the structure comprises porous media that form the packed solid material, while fluid occupies the voids. Thus, a cavity, partially filled with a fluid layer and partially with a saturated porous layer, has become important in the investigation of natural convection heat transfer, carrying significant relevance within thermal energy storage systems. Motivated by these insights, the current investigation delves into the convection heat transfer driven by buoyancy and entropy generation within a partially porous cavity that is differentially heated, vertically layered and filled with a hybrid nanofluid.

The investigation encompasses two distinct scenarios. In the first instance, the porous layer is positioned next to the heated wall, while the opposite region consists of a fluid layer. In the second case, the layers switch places, with the fluid layer adjacent to the heated wall. The system of equations for fluid and porous media, along with appropriate initial and boundary conditions, is addressed using the finite difference method. The Tiwari–Das model is used in this investigation, and the viscosity and thermal conductivity are determined using correlations specific to spherical nanoparticles.

Comprehensive numerical simulations have been performed, considering controlling factors such as the Darcy number, nanoparticle volume fraction, Rayleigh number, bottom slit position and Hartmann number. The visual representation of the numerical findings includes streamlines, isotherms and entropy lines, as well as plots illustrating average entropy generation and the average Nusselt number. These representations aim to provide insight into the influence of these parameters across a spectrum of scenarios.

The computational outcomes indicate that with an increase in the Darcy number, the addition of 2.5% magnetite nanoparticles to the GO nanofluid results in an enhanced heat transfer rate, showing increases of 0.567% in Case 1 and 3.894% in Case 2. Compared with Case 2, Case 1 exhibits a 59.90% enhancement in heat transfer within the enclosure. Positioning the porous layer next to the partially cooled wall significantly boosts the average total entropy production, showing a substantial increase of 11.36% at an elevated Rayleigh number value. Positioning the hot slit near the bottom wall leads to a reduction in total entropy generation by 33.20% compared to its placement at the center and by 33.32% in comparison to its proximity to the top wall.

Bisphenol A (BPA) is a compound commonly used in the production of plastic bottles and containers, where it is used as a plasticizer and can migrate into food. Its intake may impair the functioning of endocrine glands and have a negative impact on the health of human, especially infants. Because it is also found in baby bottles. Generally BPA can enter the body through daily, cumulative and long-term consumption of various foods. The purpose of this study is to investigate the level of BPA and its migration through some food containers and bottles. It also explains the potential risks associated with its consumption.

In this study, some of the research conducted in this field has been used by searching in various Web databases, including ScienceDirect, Scopus and PubMed. Therefore, this study provides an overview of the migration of BPA from different packages and compares the obtained values with standard ranges.

Most studies showed samples below the reference value. However, the use of containers made with BPA should be controlled and government policies should be implemented to eliminate or reduce the use of these containers.

This paper collects evidence of migration of BPA to some foods through bottles and food containers.

This paper aims to investigate the corrosion kinetics and corrosion behavior of NdFeB magnets with the addition of heavy rare earth dysprosium (Dy) for its inhibitory activity on poor corrosion resistance of NdFeB magnets.

To study the effect of dysprosium addition on corrosion behavior of NdFeB magnets and investigate its mechanism, potentiodynamic polarization, scanning electron microscopy (SEM), electrochemical impedance, energy dispersion spectrum (EDS) and scanning Kelvin probe force microscopy (SKPFM) were applied in the research. Besides, microstructures were observed by SEM equipped with EDS. Atomic force microscopy was introduced to analyze the morphology, potential image as well as the contact potential difference. The SKPFM mapping scan was applied to obtain the contact potential around Nd-rich phase at 0.1 Hz. The magnets were detected via X-ray diffraction.

Substitution of Nd with Dy led to improvement of corrosion resistance and reduced the potential difference between matrix and Nd-rich phase. Corrosion resistance is Nd-rich phase < the void < metal matrix; maximum potential difference between matrix and Nd-rich phase of Dy = 0, Dy = 3 and Dy = 6 Wt.% is 411.3, 279.4 and 255.8 mV, respectively. The corrosion rate of NdFeB magnet with 6 Wt.% Dy is about 67% of that without Dy at steady corrosion stage. The addition of Dy markedly enhanced the corrosion resistance of NdFeB magnets.

This research innovatively investigates the effect of adding heavy rare earth Dy to NdFeB permanent magnets on magnetic properties, as well as their effects on microstructure, phase structure and most importantly on corrosion resistance. Most scholars are studying the effect of element addition on magnetic properties but not on corrosion resistance. This paper creatively fills this research gap. NdFeB magnets are applied in smart cars, robotics, AI intelligence, etc. The in-depth research on corrosion resistance by adding heavy rare earths has made significant and outstanding contributions to promoting the rapid development of the rare earth industry.

Intense interest has been shown in creating new and effective biocide agents as a result of changes in bacterial isolates, bacterial susceptibility to antibiotics, an increase in patients with burns and wounds and the difficulty of treating infections and antimicrobial resistance. Woven, nonwoven and knitted materials are used to make dressings; however, nonwoven dressings are becoming more popular because of their softness and high absorption capacity. Additionally, textiles have excellent geometrical, physical and mechanical features including three-dimensional structure availability, air, vapor and liquid permeability, strength, extensibility, flexibility and diversity of fiber length, fineness and cross-sectional shapes. It is necessary to treat every burn according to international protocol and along with it has to focus on particular problems of patients and the best possible results.

The objective of this paper is to conduct a thorough examination of research pertaining to the utilization of textiles, as well as alternative materials and innovative techniques, in the context of burn wound dressings. Through a critical analysis of the findings, this study intends to provide valuable insights that can inform and guide future research endeavors in this field.

In the past years, there have been several dressings such as xeroform petrolatum gauze, silver-impregnated dressings, biological dressings, hydrocolloid dressings, polyurethane film dressings, silicon-coated nylon dressings, dressings for biosynthetic skin substitutes, hydrogel dressings, newly developed dressings, scaffold bandages, Sorbalgon wound dressing, negative pressure therapy, enzymatic debridement and high-pressure water irrigation developed for the fast healing of burn wounds.

This research conducts a thorough analysis of the role of textiles in modern burn wound dressings.

In this study, we investigate the effects of an extended ternary hybrid Tiwari and Das nanofluid model on ethylene glycol flow, with a focus on heat transfer. Using the Cross non-Newtonian fluid model, we explore the heat transfer characteristics of this unique fluid in various applications such as pharmaceutical solvents, vaccine preservatives, and medical imaging techniques.

Our investigation reveals that the flow of this ternary hybrid nanofluid follows a laminar Cross model flow pattern, influenced by heat radiation and occurring around a stretched cylinder in a porous medium. We apply a non-similarity transformation to the nonlinear partial differential equations, converting them into non-dimensional PDEs. These equations are subsequently solved as ordinary differential equations (ODEs) using MATLAB’s bvp4c tools. In addition, the magnetic number in this study spans from 0 to 5, volume fraction of nanoparticles varies from 5% to 10%, and Prandtl number for EG as 204. This approach allows us to examine the impact of temperature on heat transfer and distribution within the fluid.

Graphical depictions illustrate the effects of parameters such as the Weissenberg number, porous parameter, Schmidt number, thermal conductivity parameter, Soret number, magnetic parameter, Eckert number, Lewis number, and Peclet number on velocity, temperature, concentration, and microorganism profiles. Our results highlight the significant influence of thermal radiation and ohmic heating on heat transmission, particularly in relation to magnetic and Darcy parameters. A higher Lewis number corresponds to faster heat diffusion compared to mass diffusion, while increases in the Soret number are associated with higher concentration profiles. Additionally, rapid temperature dissipation inhibits microbial development, reducing the microbial profile.

The numerical analysis of skin friction coefficients and Nusselt numbers in tabular form further validates our approach. Overall, our findings demonstrate the effectiveness of our numerical technique in providing a comprehensive understanding of flow and heat transfer processes in ternary hybrid nanofluids, offering valuable insights for various practical applications.

International Entrepreneurs (IEs) increasingly cross borders to internationalize their activities, yet the various motives driving them into foreign markets are insufficiently understood vis-à-vis the public agencies striving to attract them. Our study proposes a consideration of their interplay by contrasting the various mobility rationales of IEs with those of the investment agencies striving to capture their talent.

Empirically, we concentrate on firms selected for funding in the French Tech Ticket, a competitive program designed to incentivize international start-ups to set up business in regional clusters across France. Using a longitudinal qualitative approach, we conducted two separate rounds of semi-structured interviews with IEs, public agency managers, and incubator staff members using thematic analysis of participant narratives on mobility.

Our findings point to diverging narratives on mobility, with an overarching opportunity-centrism on the part of the entrepreneurs and a general location-centrism emanating from the regional agencies. These contrasting visions of mobility are not mutually exclusive but rather present along a mobility continuum that generates contrasting logics.

Implications for policy and practice are provided for the investment agencies crafting policies and committing resources to attract mobile international entrepreneurs. While past IE mobility may correlate with the likelihood of present and future movement, our dual settler-explorer continuum model demonstrates that a binary separation of explorers and settlers is too simplistic: explorers may be subject to settler impulses and settlers can still be drawn to exploration and nomadism. We also provide insights for IEs seeking support in their international development and mobility and the particular advantages a given host economy can offer by identifying an overarching proximity-to-distance rationale for explorers, including the common “host-as-stopover” intermediary rationale.

We theorize this incommensurability as an expression of the current complexity of international mobility and policymaking, revealing a “next-frontier” expansionism in cross-border movement that requires more deliberate consideration.