To read this content please select one of the options below:

Influence of dysprosium addition on corrosion behavior of NdFeB magnets

Jiandong Yang (Corrosion and Protection Center, Institute for Advanced Materials and Technology, University of Science and Technology Beijing, Beijing, China and Baotou Research Institute of Rare Earths, Baotou, China)
Zhiqiang Li (Baotou Research Institute of Rare Earths, Baotou, China)
Hongbo Hao (Baotou Research Institute of Rare Earths, Baotou, China)
Jinxu Li (Corrosion and Protection Center, Institute for Advanced Materials and Technology, University of Science and Technology Beijing, Baotou, China)

Anti-Corrosion Methods and Materials

ISSN: 0003-5599

Article publication date: 28 August 2024

Issue publication date: 30 October 2024

53

Abstract

Purpose

This paper aims to investigate the corrosion kinetics and corrosion behavior of NdFeB magnets with the addition of heavy rare earth dysprosium (Dy) for its inhibitory activity on poor corrosion resistance of NdFeB magnets.

Design/methodology/approach

To study the effect of dysprosium addition on corrosion behavior of NdFeB magnets and investigate its mechanism, potentiodynamic polarization, scanning electron microscopy (SEM), electrochemical impedance, energy dispersion spectrum (EDS) and scanning Kelvin probe force microscopy (SKPFM) were applied in the research. Besides, microstructures were observed by SEM equipped with EDS. Atomic force microscopy was introduced to analyze the morphology, potential image as well as the contact potential difference. The SKPFM mapping scan was applied to obtain the contact potential around Nd-rich phase at 0.1 Hz. The magnets were detected via X-ray diffraction.

Findings

Substitution of Nd with Dy led to improvement of corrosion resistance and reduced the potential difference between matrix and Nd-rich phase. Corrosion resistance is Nd-rich phase < the void < metal matrix; maximum potential difference between matrix and Nd-rich phase of Dy = 0, Dy = 3 and Dy = 6 Wt.% is 411.3, 279.4 and 255.8 mV, respectively. The corrosion rate of NdFeB magnet with 6 Wt.% Dy is about 67% of that without Dy at steady corrosion stage. The addition of Dy markedly enhanced the corrosion resistance of NdFeB magnets.

Originality/value

This research innovatively investigates the effect of adding heavy rare earth Dy to NdFeB permanent magnets on magnetic properties, as well as their effects on microstructure, phase structure and most importantly on corrosion resistance. Most scholars are studying the effect of element addition on magnetic properties but not on corrosion resistance. This paper creatively fills this research gap. NdFeB magnets are applied in smart cars, robotics, AI intelligence, etc. The in-depth research on corrosion resistance by adding heavy rare earths has made significant and outstanding contributions to promoting the rapid development of the rare earth industry.

Keywords

Acknowledgements

Declaration of Competing Interest: The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper.

Data Availability: The raw/processed data required to reproduce these findings cannot be shared at this time as the data also forms part of an ongoing study.

This project was supported by the National Natural Science Foundation of China under grant no. 51371037 and 52271050.

Citation

Yang, J., Li, Z., Hao, H. and Li, J. (2024), "Influence of dysprosium addition on corrosion behavior of NdFeB magnets", Anti-Corrosion Methods and Materials, Vol. 71 No. 6, pp. 789-798. https://doi.org/10.1108/ACMM-05-2024-3016

Publisher

:

Emerald Publishing Limited

Copyright © 2024, Emerald Publishing Limited

Related articles