Search results

Methylene blue (MB) is classified as a cationic dye which is widely used as chemical indicator, coloring agent and biological stain. The discharge of this dye to the water streams is harmful to the human beings. For this reason, this study investigated the removal of MB from aqueous solution by hydrogel nanocomposite.

In experimental part, at first, ultraviolet (UV)-curable hydrogel/chitosan nanocomposite, which improves its elasticity by urethane acrylate, was synthesized and characterized by FTIR and SEM analysis. Afterward, the synthesized hydrogel nanocomposite was applied for the removal of MB and the influence of operational condition including nanocomposite loading, dye concentration, contact time and pH of solution was specified. Moreover, isotherm studies as well as kinetics survey were performed.

Langmuir, Freundlich, Brunauer, Emmett and Teller and Tempkin adsorption isotherms were assessed for the analysis of experimental data indicating the Freundlich isotherm was the best fitted one. The adsorption kinetics data was examined indicating the adsorption kinetics appropriate to pseudo-second-order kinetics model.

The predominant water absorption property of the UV-curable hydrogel/chitosan nanocomposite to 8.5 steps and outstanding adsorption capacity for the elimination of MB on hydrogel nanocomposite subscribed that the synthesized hydrogel could be a favorable adsorbent for simultaneous absorption of water and removal of cationic dyes.

The purpose of this paper is to focus on the removal of Congo red dye from aqueous solution using magnetically separable novel adsorbent prepared by coating activated charcoal on magnetic nanoparticles.

The synthesized magnetic nanocomposite of activated charcoal was characterized using Fourier transform infra-red (FTIR), scanning electron microscope (SEM) and energy dispersive spectroscopy (EDS) analysis. The removal of Congo red from aqueous solution using magnetic nanocomposite of activated charcoal was optimized. The equilibrium and kinetics modeling of adsorption of Congo red was analyzed.

The presence of activated charcoal on magnetic nanocomposite was confirmed by FTIR analysis. The average size of the nanocomposite was found to be 12.77 nm using SEM characterization. The elemental composition by EDS analysis confirmed the increase in concentration of carbon due the adsorption of Congo red dye. The optimum conditions for batch adsorption was found to be 1 g/L of adsorbent, dye concentration 50 mg/L, pH 3 and temperature 70°C. The adsorption of Congo red dye on magnetic nanocomposite of activated charcoal was found to follow Temkin adsorption isotherm.

The experimental data were found to fit well with the pseudo second-order kinetics and the rate of adsorption was found to be controlled by intra-particle diffusion.

Water is a vital natural resource without which life on earth would be impossible. Properties of synthetic dyes like high stability and noxious nature make it difficult to remove them from the effluent. This review focuses on the removal of synthetic dyes using nanoparticles (NPs) based on the adsorption principle.

Adsorption technique is widely used to remove synthetic dyes from their aqueous solution for decades. Synthetic dye removal using NPs is promising, less energy-intensive and has become popular in recent years. NPs are in high demand for treating wastewater using the adsorption principle due to their tiny size and vast surface area. To maximise environmental sustainability, the utilisation of green-produced NPs as efficient catalysts for dye removal has sparked attention amongst scientists.

This review has prioritised research and development of optimal dye removal systems that can be used to efficiently remove a large quantity of dye in a short period while safeguarding the environment and producing fewer harmful by-products. The removal efficiency of synthetic dye using different NPs in wastewater treatment varies mostly between 75% to almost 100%. This review will aid in the scaling up of the wastewater treatment process.

There is a lack of research emphasis on the safe disposal of NPs once the reuse efficiency significantly drops. The relevance of cost analysis is equally critical, yet only a few papers discuss cost-related information.

Comprehensive and planned research in this area can aid in the development of long-term wastewater treatment technology to meet the growing need for safe and reliable water emphasising reuse and desorption efficiency of the NPs.

In order to discover a new adsorbent that can be used to purify dye wastewater in the textile and apparel industry, a novel type of graphene oxide/gluten composite material using an improved acid bath coagulation method was synthesized, which can remove methylene blue in an aqueous environment.

After experimentally compounding different ratios of graphene oxide and gluten, the graphene oxide/gluten composite material with 20% graphene oxide content and superlative adsorption effect was chosen. The synthesized material was characterized by different techniques such as FT-IR and SEM, indicating the microstructure of the material and the success of the composite. Various factors were considered, namely, the influence of temperature, dosage, pH and contact time. The isotherms, kinetics and thermodynamic parameters were successively discussed.

The qmax value of 214.29 mg/g of the material was higher compared to the general sorbent, thus, the graphene oxide/gluten composite material was a suitable sorbent for methylene blue removal. Overall, the graphene oxide/gluten composite material can be considered as an effectual and prospective adsorbent to remove methylene blue in the textile and apparel industrial effluent.

Graphene oxide is a potentially excellent sorbent. However, the high dispersibility of GO is detrimental to adsorption, it disperses rapidly in an aqueous solution making separation and recovery difficult. The high load capacity and recyclability of gluten as a colloid make it a suitable carrier for fixing GO. Studies on the combination of GO and GT into composite adsorption material and for the removal of dyes from dyeing wastewater have not been reported. The composite material research on GO and GT can provide new ideas for the research of these kinds of materials and contribute to its wider and convenient application in wastewater treatment.

The purpose of this paper is to focus on the removal of hexavalent chromium [Cr(VI)] from wastewater by using activated carbon-supported Fe catalysts derived from walnut shell prepared using a wetness impregnation process. The different conditions of preparation such as impregnation rate and calcination conditions (temperature and time) were optimized to determine their effects on the catalyst’s characteristics.

The catalyst samples were characterized using thermogravimetric analysis, scanning electron microscopy and Fourier transform infrared spectroscopy. The adsorption of Cr(VI) by using using activated carbon supported Fe catalysts derived from walnut shell as an adsorbent and catalyst was investigated under different adsorption conditions. The parameters studied were contact time, adsorbent dose, solution pH and initial concentrations.

Results showed that higher adsorption capacity and rapid kinetics were obtained when the activated walnut shell was impregnated with Fe at 5 per cent and calcined under N₂ flow at 400°C for 2 h. The adsorption isotherms data were analyzed with Langmuir and Freundlich models. The better fit is obtained with the Langmuir model with a maximum adsorption capacity of 29.67 mg/g for Cr(VI) on Fe5-AWS at pH 2.0.

A comparison of two kinetic models shows that the adsorption isotherms system is better described by the pseudo-first-order kinetic model.

A nanosilica adsorbent was prepared and characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD) and BET.

The optimum conditions for the highest adsorption performance were determined by kinetic modeling. The adsorbent was used for the adsorption of acetaminophen (ACT), and the parameters affecting the adsorption were discussed like pH, initial concentration, contact time and adsorbent dosage. The adsorbent have been characterized by SEM, XRD and BET analysis. The kinetic models including pseudo-first-order and pseudo-second-order with Langmuir and Freundlich isotherm models were applied to investigate the kinetic and isotherms parameters.

The adsorption of ACT increased to around 95% with the increase of nanosilica concentration to 30 g/L. Moreover, the adsorption process of ACT follows the pseudo-second-order kinetics and the Langmuir isotherm with the maximum adsorption capacity of 609 mg/g.

This study provided a simple and effective way to prepare of nanoadsorbents. This way was conductive to protect environmental and subsequent application for removal of emerging pollutants from aqueous solutions.

The novelty of the study is synthesizing the morphological and structural properties of nanosilica-based adsorbent (specific surface area, pore volume and size, shape and capability) and improving its removal rate through optimizing the synthesis method; and studying the capability of synthesis of nanosilica-based adsorbent for removal of ACT as a main emerging pharmaceutical water contaminant.

To treat water pollution, especially the contamination resulted from organic dyes has aroused significant attention around the world, this study aims to prepare the metal organic framework (MOF) materials hybridizing with poly(p-phenylene terephthalamide) (PPTA) by means of a facile refluxing method and to systematically investigate adsorption performance for anionic dye Congo red as target molecule from aqueous solution.

The MOF materials hybridized by PPTA were fabricated by virtue of a facile refluxing method, characterized by thermogravimetric analysis, X-ray powder diffraction, Fourier transform infrared and pore structure.

The results showed that pseudo-second-order kinetic model could better describe the adsorption process for all the four materials, whereas Elovich model also fitted the process for the hybrid materials with PPTA. Adsorption isotherm analyses indicated that Langmuir isotherm could be used to describe the adsorption process. Introduction of appropriate amount of PPTA could enhance the adsorption affinity of the MOF materials for Congo red, and the maximum adsorption capacity could reach as high as 1,053.41 mg/g while that of the MOF material without PPTA was 666.67 mg/g, indicating introduction of PPTA could change the microenvironment of the MOF materials and increase the adsorption sites, leading to high adsorption efficiency.

The microstructure of MOF hybridized materials in detail is the further and future investigation.

This study will provide a method to prepare MOF materials with high efficiency to treat anionic dyes like Congo red from aqueous solution.

Owing to the special characteristics of PPTA and similar to carbon tube, PPTA was introduced into MOF material to increased corresponding water stability. Because of aromatic ring and amide group on the surface of PPTA, the adsorption efficiency of the hybridized MOF material with appropriate amount of PPTA was greatly enhanced.

The purpose of this paper is to examine the batch adsorption system of a cationic dye (methylene blue, widely used in various sectors) on two adsorbents; ZSM-5 zeolite which was prepared with the molar composition: 0.2057 Na₂O-0.00266 Al₂O₃-SiO₂-0.68 (pyrrolidine)-40 H₂O-0.12 H₂SO₄.

By the hydrothermal synthesis method, and the purified clay and is analyzed by IR and DRX method.

For this, the authors conducted a parametric study of adsorption and effect of several important parameters on the adsorption of BM on the material used, in particular, the contact time (equilibrium is established after 120 min), different concentrations of adsorbents, different masses, the pH and temperature. The experiments demonstrated the crucial role of these parameters. A kinetic study was done and kinetic models were applied to the experimental results such as the pseudo-first order, pseudo-second order.

This work is original.

The purpose of this paper is to purify the wastewater in the garment industry.

The preparation of the calcium alginate (CA)/activated carbon (AC) composite membrane was achieved by vacuum freeze-drying and the cross-linking reaction between sodium alginate and CaCl₂. Effective parameters in the methylene blue (MB) adsorption such as temperature, dose, contact time and pH were discussed. The adsorption properties of the composite membrane were investigated by isotherm, kinetics and thermodynamic analysis. The adsorption equilibrium data were described by the adsorption isotherm Langmuir model and the Freundlich model. The pseudo-first-order, pseudo-second-order and intra-particle diffusion equations were selected to evaluate the kinetics. The thermodynamic study described that the adsorption reaction was spontaneous and exothermic.

The AC/CA membrane is an efficient and powerful adsorbent to remove MB in printing and dyeing wastewater, and provides a new idea for the selection of adsorption materials for industrial printing and dyeing wastewater.

The composite membrane research on CA and AC can provide new ideas for the research of these kinds of materials.

The paper contributes to its wider and convenientapplication in wastewater treatment.

Studies on the combination of CA and AC into adsorption membranes and for the removal of dyes from printing and dyeing wastewater have not been reported. A novel composite material is provided for treatment dyeing wastewater in garment production. The composite membrane research on CA and AC can provide new ideas for the research of these kinds of materials and contribute to its wider and convenient application in wastewater treatment.

This paper aims to explore the adsorption kinetics of syringin from Syringa oblata Lindl. leaves on macroporous resin and develop an efficient, simple and recyclable technology for the separation and purification of syringin.

Static adsorption and desorption properties of six resins were tested to select a suitable resin for the purification of syringin. Langmuir and Freundlich isotherm models were used to estimate the adsorption behavior of syringin on AB-8 resin. Breakthrough point and eluent volume were determined by dynamic adsorption and desorption tests. High-performance liquid chromatography-electrospray ionization-mass spectrometry was applied to identify the syringin in the purified product [syringin product (SP)]. Antioxidant and antibacterial activities of SP in vitro were evaluated by free radical scavenging ability and biofilm formation inhibitory tests.

AB-8 exhibited the most suitable adsorption and desorption capacity. Adsorption isotherm parameters indicated favorable adsorption between AB-8 and syringin. The optimal results were as follows: for adsorption, the sample concentration was 1.85 mg/mL, the sample volume was 3.5 bed volume (BV), the flow rate was 0.5 mL/min; for desorption, the ethanol concentration was 70%, the elution volume was 2.5 BV, the elution velocity was 1.0 mL/min. SP with 80.28% syringin displayed the potent antioxidant activities and inhibitory effects on biofilm formation of Streptococcus suis.

To the best of authors’ knowledge, there are no reports on purifying syringin from Syringa oblata Lindl. leaves using macroporous resins. This paper may also provide a theoretical reference for the purification of other phenylpropanoid glucosides.