Search results
1 – 10 of 677
This paper aims to predict the effects of uniform injection or suction through a porous square cylinder on the flow field and on some aerodynamic parameters.
Abstract
Purpose
This paper aims to predict the effects of uniform injection or suction through a porous square cylinder on the flow field and on some aerodynamic parameters.
Design/methodology/approach
The finite volume method has been used for solving the ensemble averaged Navier–Stokes equations for incompressible flow in conjunction with the k‐ ε turbulence model equations including the Kato and Launder modification.
Findings
The parameters taken into account are injection or suction velocity, position of injection and suction surface, drag and lift coefficients and Strouhal number. The numerical results show that increasing suction velocity decreases the drag coefficient for all the suction configurations considered in the present study, except that of suction through rear surface. The vortex‐shedding motion gets weak by the suction application through top and bottom surfaces.
Research limitations/implications
The problem is restricted with a 2‐D simple geometry such as square cylinder due to the limited computer capability. Further extensions of the present study could include the more complex configurations and some other aspects such as heat transfer between porous cylinder and main flow.
Practical implications
The injection or suction application through a porous bluff body can be used as an efficient drag and vortex control method in aerodynamics.
Originality/value
This paper describes an attempt to simulate numerically the flow around square cylinder with uniform injection and suction in a manner different from what is given in the literature.
Details
Keywords
Mir Elyad Vakhshouri and Burhan Çuhadaroğlu
The purpose of this paper is to study the effects of uniform injection and suction through a perforated pentagonal cylinder on the flow field and heat transfer.
Abstract
Purpose
The purpose of this paper is to study the effects of uniform injection and suction through a perforated pentagonal cylinder on the flow field and heat transfer.
Design/methodology/approach
The finite-volume method has been used to solve the ensemble-averaged Navier-Stokes equations for incompressible flow at moderate Reynolds number (Re = 22,000) with the k-ɛ turbulence model equations.
Findings
A computational fluid dynamics analysis of turbulent flow past a non-regular pentagonal cylinder with three different aspect ratios aspect ratios has been carried out to investigate the effects of uniform injection/suction through the front and all surfaces of the cylinder. It is found that flow field parameters such as drag coefficient, pressure coefficient and Nusselt number are affected considerably in some cases depend on injection/suction rate (Γ) and perforated wall position.
Research limitations/implications
To optimize the efficiency of the injection and suction through a perforated surface, both wide-ranging and intensive further studies are required. Using various perforation ratios and injection/suction intensities are some possibilities.
Practical implications
Control of the vortex shedding and wake region behind bluff bodies is of vital interest in fluid dynamics. Therefore, applying uniform injection and suction from a perforated bluff body into the main flow can be used as a drag reduction mechanism, thermal protection and heat transfer enhancement.
Originality/value
This study provides unique insights into the active flow control method around pentagonal cylinders that can be useful for researchers in the field of fluid dynamics and aeronautics.
Details
Keywords
Ismail Arroub, Ahmed Bahlaoui, Abdelghani Raji, Mohammed Hasnaoui and Mohamed Naïmi
The purpose of this paper is to investigate numerically mixed convection of Al2O3-water nanofluids flowing through a horizontal ventilated cavity heated from below by a…
Abstract
Purpose
The purpose of this paper is to investigate numerically mixed convection of Al2O3-water nanofluids flowing through a horizontal ventilated cavity heated from below by a temperature varying sinusoidally along its lower wall. The simulations focus on the effects of different key parameters, such as Reynolds number (200 ≤ Re ≤ 5,000), nanoparticles’ concentration (0 ≤ ϕ ≤ 0.1) and phase shift of the heating temperature (0 ≤ γ ≤ π), on flow and thermal patterns and heat transfer performances.
Design/methodology/approach
The Navier–Stokes equations describing the nanofluid flow were discretized using a finite difference technique. The vorticity and energy equations were solved by the alternating direction implicit method. Values of the stream function were obtained by using the point successive over-relaxation method.
Findings
The simulations were performed for two modes of imposed external flow (injection and suction). The main findings are that the dynamical and thermal fields are affected by the parameters Re, ϕ, γ and the applied ventilation mode; the addition of nanoparticles leads to an improvement of heat transfer rate and an increase of mean temperature inside the enclosure; the heat exchange performance and the better cooling are more pronounced in suction mode; the phase shift of the heating temperature may lead to periodic solutions for weaker values of Re and contributes to an increase or a decrease of heat transfer depending on the value of ϕ and the convection regime.
Originality/value
To the best of the authors’ knowledge, the problem of mixed convection of a nanofluid inside a vented cavity using the injection or suction technics and submitted to non-uniform heating conditions has not been treated so far.
Details
Keywords
In the present study, the characteristics of the turbulent boundary layer developing on a porous wall with various angles of injection and suction are analyzed numerically with…
Abstract
In the present study, the characteristics of the turbulent boundary layer developing on a porous wall with various angles of injection and suction are analyzed numerically with the proper boundary conditions. The finite difference method based on a control volume approach is used for solving the time averaged Navier‐Stokes equations for incompressible flow in conjunction with the standard k‐ε turbulence model equations. The wall functions of the viscous and turbulent sub‐layers are modified to allow for the effect of the angle of injection and suction through the porous wall. A non‐uniform staggered grid arrangement is used. The parameters studied include the velocity (Vw) and the angle (α) of the injection and suction. The present numerical results of the normal injection and suction are compared with the known experimental data and a good agreement is obtained. The numerical results also indicate that the characteristics of the turbulent boundary layer such as local friction coefficient, boundary layer thickness and shape factor are substantially influenced by the velocity and the angle of injection and suction.
Details
Keywords
The hydrodynamic and thermal characteristics of the turbulent boundary layer developed on a porous wall with heat transfer and various angles of transpiration are analyzed…
Abstract
The hydrodynamic and thermal characteristics of the turbulent boundary layer developed on a porous wall with heat transfer and various angles of transpiration are analyzed numerically with the proper boundary conditions. The wall functions of the viscous and turbulent sub‐layers for velocity and temperature are modified to allow for the effect of the angle of injection and suction through the porous wall. The finite difference method based on a control volume approach is used for solving the time averaged Navier‐Stokes equations for incompressible flow in conjunction with the standard k‐ε turbulence model equations. A non‐uniform staggered grid arrangement is used. The parameters studied include the suction and injection velocity (Vw) and the angle (α) of the injection and suction. The present numerical results of the normal injection and suction are compared with a known experimental data and a good agreement is obtained. The numerical results also indicate that the characteristics of the turbulent boundary layer such as local friction coefficient and thermal boundary layer thickness are substantially influenced by the velocity and the angle of transpiration.
Details
Keywords
Abdul Rahman Mohd Kasim, Zarith Sofiah Othman, Sharidan Shafie and Ioan Pop
The purpose of this paper is to study the Blasius flat plate with viscous dissipation in the presence of suction or injection effects in the boundary layer of a viscoelastic…
Abstract
Purpose
The purpose of this paper is to study the Blasius flat plate with viscous dissipation in the presence of suction or injection effects in the boundary layer of a viscoelastic fluid.
Design/methodology/approach
The governing partial differential equations are derived as a first order ordinary differential equation using similarity (Blasius) variables. Velocity profiles, temperature profiles, skin friction parameters, and heat transfer parameters are computed numerically for various values of the viscoelastic parameter K, the suction or injection parameter f w , the Prandtl number Pr, the Eckert number Ec, and the moving parameter λ.
Findings
The effects of the viscoelastic, moving, and suction/injection parameters on the skin friction and heat transfer of the flat plate are studied. The effects of these parameters on the velocity and temperature profiles are also presented for 0≤Pr≤3.
Originality/value
To the best of the authors' knowledge, this important classical problem has not been studied before for the case of a viscoelastic fluid. Thus, the results are original and new for this type of fluid.
Details
Keywords
Tirivanhu Chinyoka and Daniel Oluwole Makinde
The purpose of this paper is to examine the unsteady pressure-driven flow of a reactive third-grade non-Newtonian fluid in a channel filled with a porous medium. The flow is…
Abstract
Purpose
The purpose of this paper is to examine the unsteady pressure-driven flow of a reactive third-grade non-Newtonian fluid in a channel filled with a porous medium. The flow is subjected to buoyancy, suction/injection asymmetrical and convective boundary conditions.
Design/methodology/approach
The authors assume that exothermic chemical reactions take place within the flow system and that the asymmetric convective heat exchange with the ambient at the surfaces follow Newton’s law of cooling. The authors also assume unidirectional suction injection flow of uniform strength across the channel. The flow system is modeled via coupled non-linear partial differential equations derived from conservation laws of physics. The flow velocity and temperature are obtained by solving the governing equations numerically using semi-implicit finite difference methods.
Findings
The authors present the results graphically and draw qualitative and quantitative observations and conclusions with respect to various parameters embedded in the problem. In particular the authors make observations regarding the effects of bouyancy, convective boundary conditions, suction/injection, non-Newtonian character and reaction strength on the flow velocity, temperature, wall shear stress and wall heat transfer.
Originality/value
The combined fluid dynamical, porous media and heat transfer effects investigated in this paper have to the authors’ knowledge not been studied. Such fluid dynamical problems find important application in petroleum recovery.
Details
Keywords
Pascalin Tiam Kapen, Cédric Gervais Njingang Ketchate, DIdier Fokwa and Ghislain Tchuen
This paper aims to investigate a linear and temporal stability analysis of hybrid nanofluid flow between two parallel plates filled with a porous medium and whose lower plate is…
Abstract
Purpose
This paper aims to investigate a linear and temporal stability analysis of hybrid nanofluid flow between two parallel plates filled with a porous medium and whose lower plate is fixed and the upper plate animated by a uniform rectilinear motion.
Design/methodology/approach
The nanofluid is composed of water as a regular fluid, silver (Ag) and alumina (Al2O3) as nanoparticles. The mathematical model takes into account other effects such as the magnetic field and the aspiration (injection/suction). Under the assumption of a low magnetic Reynolds number, a modified Orr–Sommerfeld-type eigenvalue differential equation governing flow stability was derived and solved numerically by Chebyshev’s spectral collocation method. The effects of parameters such as volume fraction, Darcy number, injection/suction Reynolds number, Hartmann number were analyzed.
Findings
It was found the following: the Darcy number affects the stability of the flow, the injection/suction Reynolds number has a negligible effect, the volume fraction damped disturbances and the magnetic field plays a very important role in enlarging the area of flow stability.
Originality/value
The originality of this work resides in the linear and temporal stability analysis of hydromagnetic Couette flow for hybrid nanofluid through porous media with small suction and injection effects.
Details
Keywords
Fatinnabila Kamal, Khairy Zaimi, Anuar Ishak and Ioan Pop
This paper aims to analyze the behavior of the stagnation-point flow and heat transfer over a permeable stretching/shrinking sheet in the presence of the viscous dissipation and…
Abstract
Purpose
This paper aims to analyze the behavior of the stagnation-point flow and heat transfer over a permeable stretching/shrinking sheet in the presence of the viscous dissipation and heat source effects.
Design/methodology/approach
The governing partial differential equations are converted into ordinary differential equations by similarity transformations before being solved numerically using the bvp4c function built in Matlab software. Effects of suction/injection parameter and heat source parameter on the skin friction and heat transfer coefficients as well as the velocity and temperature profiles are presented in the forms of tables and graphs. A temporal stability analysis will be conducted to verify which solution is stable for the dual solutions exist for the shrinking case.
Findings
The analysis indicates that the skin friction coefficient and the local Nusselt number as well as the velocity and temperature were influenced by suction/injection parameter. In contrast, only the local Nusselt number, which represents heat transfer rate at the surface, was affected by heat source effect. Further, numerical results showed that dual solutions were found to exist for the certain range of shrinking case. Then, the stability analysis is performed, and it is confirmed that the first solution is linearly stable and has real physical implication, while the second solution is not.
Practical implications
In practice, the study of the steady two-dimensional stagnation-point flow and heat transfer past a permeable stretching/shrinking sheet in the presence of heat source effect is very crucial and useful. The problems involving fluid flow over stretching or shrinking surfaces can be found in many industrial manufacturing processes such as hot rolling, paper production and spinning of fibers. Owing to the numerous applications, the study of stretching/shrinking sheet was subsequently extended by many authors to explore various aspects of skin friction coefficient and heat transfer in a fluid. Besides that, the study of suction/injection on the boundary layer flow also has important applications in the field of aerodynamics and space science.
Originality/value
Although many studies on viscous fluid has been investigated, there is still limited discoveries found on the heat source and suction/injection effects. Indeed, this paper managed to obtain the second (dual) solutions and stability analysis is performed. The authors believe that all the results are original and have not been published elsewhere.
Details
Keywords
Bourhan Tashtoush, Z. Kodah and A. Al‐Ghasem
Heat transfer characteristics of a non‐Newtonian fluid on a power‐law stretched surface with suction or injection were investigated. Similarity solutions of the laminar boundary…
Abstract
Heat transfer characteristics of a non‐Newtonian fluid on a power‐law stretched surface with suction or injection were investigated. Similarity solutions of the laminar boundary layer equations describing heat transfer flow in a quiescent fluid were obtained and solved numerically. Temperature profiles as well as the Nusselt number Nu, were obtained for two thermal boundary conditions; namely, uniform surface temperature (b=0) and cooled surface temperature (b=–1), for different governing parameters such as Prandtl number Pr, injection parameter d and power‐law index n. It was found that decreasing injection parameter d and power‐law index n and increasing Prandtl number Pr enhanced the heat transfer coefficient.
Details