Search results

This paper aims to promote the higher quality development of high-tech enterprises in China. While science and technology have greatly promoted human civilization, resources have been excessively consumed and the environment has been sharply polluted. Therefore, it is particularly important for current enterprises to make use of scientific and technological innovation to maximize the benefits of mankind, minimize the loss of nature, and promote the sustainable development of our country.

By using DEA-Banker-Charnes-Cooper (BCC) model and DEA-Malmquist model, this paper comprehensively examines the innovation efficiency of high-tech enterprises from both static and dynamic perspectives, and conducts a provincial comparative study with the panel data of ten representative provinces from 2011 to 2020.

The research findings are as follows: the rapid number increase of high-tech enterprises in most provinces (cities) is accompanied by an ineffective input–output efficiency; the quality of high-tech enterprises needs to comprehensively examine both input–output efficiency and total factor productivity; and there is not a positive correlation between element investment and innovation performance.

Because the DEA model used in this paper assumes that the improvement direction of invalid units is to ensure that the input ratio of various production factors remains unchanged but sometimes the proportion of scientific and technological activities personnel and the total research and development investment is not constant. In the future, the nonradial DEA model can be considered for further research. Due to historical data statistics, more provinces, cities and longer panel data are difficult to obtain. The samples studied in this paper mainly refer to the provinces and cities that ranked first in the number of national high-tech enterprises in 2020. Limited by the number of samples, DEA analysis failed to select more input and output indicators. In the future, with the accumulation of statistical data, the existing efficiency analysis will be further optimized.

Aiming at the misunderstanding of emphasizing quantity and neglecting quality in the cultivation of high-tech enterprises, this paper comprehensively uses DEA-BCC model and DEA Malmquist index decomposition method to make a comprehensive comparative study on the development of high-tech enterprises in ten representative provinces (cities) from two aspects of static efficiency evaluation and dynamic efficiency evaluation.

This study aims to explore how to overcome and address the loss of exploratory innovation, thereby achieving greater success in exploratory innovation. This phenomenon of loss occurs when enterprises decrease their investment in and engagement with exploratory innovation, ultimately leading to an insufficient amount of such innovation efforts. Drawing on dynamic capabilities, this study investigates the relationship between organizational foresight and exploratory innovation and examines the moderating role of breakthrough orientation/financial orientation.

This study used survey data collected from 296 Chinese high-tech companies in multiple industries and sectors.

The evidence produced by this study reveals that three elements of organizational foresight (i.e. environmental scanning capabilities, strategic selection capabilities and integrating capabilities) positively influence exploratory innovation. Furthermore, this positive effect is strengthened in the context of a high-breakthrough orientation. Moreover, the relationships among environmental scanning capabilities, strategic selection capabilities and exploratory innovation become weaker as an enterprise’s financial orientation increases, whereas a strong financial orientation does not affect the relationship between integrating capabilities and exploratory innovation.

Ambidexterity is key to successful enterprise innovation. Compared with exploitative innovation, it is by no means easy to engage in exploratory innovation, which is especially important in high-tech companies. While the loss of exploratory innovation has been observed, few empirical studies have explored ways to promote exploratory innovation more effectively. A key research implication of this study pertains to the role of organizational foresight in the improvement of exploratory innovation in the context of high-tech companies.

This paper contributes to the broader literature on exploratory innovation and organizational foresight and provides practical guidance for high-tech companies regarding ways of avoiding the loss of exploratory innovation and becoming more successful at exploratory innovation.

This study aims to explore how the absorptive capacity of emerging market multinationals (EMNEs) facilitates increased acquirer performance in industry exploration and technology exploration cross-border acquisitions (CBAs).

The research context for this study is Brazilian EMNEs and their CBAs. The final database contains 101 CBAs.

The authors find that industry exploration strategies negatively affect financial performance, but technology exploration strategies have a positive effect. The acquirer’s absorptive capacity can exacerbate the negative effects, except in instances of technology exploration strategies, where there is a demonstrable benefit from the acquirer’s absorptive capacity.

The study contributes first by providing a more nuanced understanding of the effects of absorptive capacity on postacquisition performance, depending on the type of knowledge explored. Second, by drawing on EMNE learning perspectives, the authors demonstrate the versatility of absorptive capacity in emerging markets.

The purpose of this study is shed light on the underlying forces behind entrepreneurship within a regional innovation system (RIS) in a remote rural region. The authors examine the following questions: Which are the main underlying forces behind the entrepreneurial process in a rural RIS characterized by traditionally low-tech, small-scale businesses? How can the development of a low-tech regional innovation system be conceptualized?

The design of the study is based on entrepreneurship theory. Data analysis followed practices used in phenomenography, a research approach used to analyse and identify commonalities and variations in populations' perceptions of a certain phenomenon. Data are composed using semi-structured interviews and a database composed of company information of all firms in the population.

A proactive mobilization of regional stakeholders and resources can be an important driving force behind the entrepreneurial process and generation of a rural RIS. Innovation can be generated within low-tech industries turning the rural context into an asset. An RIS in a remote rural context can be initiated and orchestrated by regional authorities, but knowledge brokering and orchestration can also be managed by networks of small-scale businesses brought together by mutual benefit and common interests.

Regional innovation systems theory is most often used to study high-tech industries. But by combining regional innovation systems with rural entrepreneurship and entrepreneurship context theory is a fruitful avenue to understand the role of rural entrepreneurship in regional development, even in remote and peripheral regions. Innovation does not need to entail high-tech international environments; it can appear as the result of efforts in low-tech industries in rural and remote environments. The authors’ findings need to be scrutinized; therefore, the authors call for more research on regional innovation systems in rural environments.

It is possible for regional authorities to orchestrate a development process through the actions of a strong regional agent but also by supporting the creation of networks of small businesses that are built on trust and common interests.

This study contributes to the literature with a new perspective to the study of entrepreneurship and of regional innovation systems. Entrepreneurship research with focus on rural contexts most often highlight limits to entrepreneurship and see entrepreneurship as “just running a business”. A perspective that starts from innovation and innovative behaviour, despite the rural context and embedded resources, helps to generate new knowledge that can enrich the understanding of entrepreneurship and also be the foundation for more precise business development policies in rural settings.

The development of green manufacturing has become essential to achieve sustainable development and modernize the nation’s manufacturing and production capacity without increasing nonrenewable resource consumption and pollution. This study investigates the effect of green industrial practices on technical efficiency for Thai manufacturers.

The study uses stochastic frontier analysis (SFA) to estimate the stochastic frontier production function (SFPF) and inefficiency effects model, as pioneered by Battese and Coelli (1995).

This study shows that, on average, Thai manufacturing firms have experienced declining returns-to-scale production and relatively low technical efficiency. However, it is estimated that Thai manufacturing firms with a green commitment obtained the highest technical efficiency, followed by those with green activity, green systems and green culture levels, compared to those without any commitment to green manufacturing practices. Finally, internationalization and skill development can significantly improve technical efficiency.

Green industry policy mixes will be vital for driving structural reforms toward a more environmentally friendly and sustainable economic system. Furthermore, circular economy processes can promote firms' production efficiency and resource use.

To the best of the authors' knowledge, this study is the first to investigate the effect of green industry practices on the technical efficiency of Thai manufacturing enterprises. This study also encompasses analyses of the roles of internationalization, innovation and skill development.

In this paper, we evaluated the impact of the US “Chip Act” on the participation of the Chinese electronics industry in the global value chain based on the dynamic CGE model. This is a meaningful attempt to use the GTAP-VA model to analyze the electronics industry in China.

We employ a Dynamic GTAP-VA Model to quantitatively evaluate the economic repercussions of the “Chip Act” on the Chinese electronic industries' GVC participation from 2023 to 2040.

The findings depict a discernible contraction in China’s electronic sector by 2040, marked by a −2.95% change in output, a −3.50% alteration in exports and a 0.45% increment in imports. Concurrently, the U.S., EU and certain Asian economies exhibit expansions within the electronic sector, indicating a GVC realignment. The “Chip Act” implementation precipitates a significant divergence in GVC participation across different countries and industries, notably impacting the electronics sector.

Through a meticulous temporal analysis, this manuscript unveils the nuanced economic shifts within the GVC, substantially bridging the empirical void in existing literature. This narrative accentuates the profound implications of policy regulations on global trade dynamics, contributing to the discourse on international economic policy and industry evolution.

We evaluated the impact of the US “Chip Act” on the participation of the Chinese electronics industry in the global value chain based on the dynamic CGE model. This is a meaningful attempt to use the GTAP-VA model to analyze the electronics industry in China.

The interaction between policy regulations and global value chain (GVC) dynamics is pivotal in understanding the contemporary global trade framework, especially within technology-driven sectors. The US “Chips Act” represents a significant regulatory milestone with potential ramifications on the Chinese electronic industries' engagement in the GVC.

The significance of this paper is that it quantifies for the first time the impact of the US Chip Act on the GVC participation index of East Asian countries in the context of US-China decoupling. With careful consideration of strategic aspects, this paper substantially fills the empirical gap in the existing literature by presenting subtle economic changes within GVCs, highlighting the profound implications of policy regulation on global trade dynamics.

This study aims to investigate the impact of supply chain concentration (SCC) on corporate research and development (R&D) investment and determine the moderating roles of industry concentration and financing constraints on the relationship between SCC and R&D investment.

The study collected data from Chinese listed companies, used the fixed effects model to test the research hypotheses and further used the two-stage Heckman test and propensity score matching (PSM) to address potential endogeneity issues.

The result reveals a negative impact of SCC on corporate R&D investment. In addition, industry concentration mitigates the negative impact of SCC on corporate R&D investment, but financing constraints strengthen the negative impact.

This study introduces the concept of SCC and empirically tests its effect on R&D investment, further explaining the lack of corporate innovation. This study inspires companies to strengthen SC management and weigh the level of SCC with environmental factors.

This paper aims to examine the interrelation between two innovating strategies (product and process) on total factor productivity (TFP) growth and the dynamic linkages between these strategies, for Colombia. The authors first explore whether ex ante more productive firms are those that introduce innovations (the self-selection hypothesis) and if the introduction of innovations boosts TFP growth (the returns-to-innovation hypothesis). Second, the authors study the firm’s joint dynamic decision to implement process and/or product innovations. The authors use Colombian manufacturing data from the Annual Manufacturing and the Technological Development and Innovation Surveys.

This study uses a four-stage procedure. First, the authors estimate TFP using a modified version of Olley and Pakes (1996) and Levinsohn and Petrin (2003), proposed by De Loecker (2010), that implements an endogenous Markov process where past firm innovations are endogenized. This TFP would be estimated by GMM, Wooldridge (2009). Second, the authors use multivariate discrete choice models to test the self-selection hypothesis. Third, the authors explore, using multi-value treatment evaluation techniques, the life span of the impact of innovations on productivity growth (returns to innovation hypothesis). Fourth, the authors analyse the joint likelihood of implementing process and product innovations using dynamic panel data bivariate probit models.

The investigation reveals that the self-selection effect is notably more pronounced in the adoption of process innovations only, as opposed to the adoption of product innovations only or the simultaneous adoption of both process and product innovations. Moreover, our results uncover distinct temporal patterns concerning innovation returns. Specifically, process innovations yield immediate benefits, whereas implementing both product innovations only and jointly process and product innovations exhibit significant, albeit delayed, advantages. Finally, the analysis confirms the existence of dynamic interconnections between the adoption of process and product innovations.

The contribution of this work to the literature is manifold. First, the authors thoroughly investigate the relationship between the implementation of process and product innovations and productivity for Colombian manufacturing explicitly recognising that firms’ decisions of adopting product and process innovations are very likely interrelated. Therefore, the authors start exploring the self-selection and the returns to innovation hypotheses accounting for the fact that firms might implement process innovations only, product innovations only and both process and product innovations. In the analysis of the returns of innovation, the fact that firms may choose among a menu of three innovation strategies implies the use of evaluation methods for multi-value treatments. Second, the authors study the dynamic inter-linkages between the decisions to implement process and/or product innovations, that remains under studied, at least for emerging economies. Third, the estimation of TFP is performed using an endogenous Markov process, where past firms’ innovations are endogenized.

Intellectual capital (IC) plays a crucial role in today’s volatile business landscape, yet its measurement remains complex. To better navigate these challenges, the authors propose the Integrated Intellectual Capital Measurement (IICM) model, an innovative, robust and comprehensive framework designed to capture IC amid business uncertainty. This study focuses on IC measurement models, typically reliant on secondary data, thus distinguishing it from conventional IC studies.

The authors conducted a systematic literature review (SLR) and bibliometric analysis across Web of Science, Scopus and EBSCO Business Source Ultimate in February 2023. This yielded 2,709 IC measurement studies, from which the authors selected 27 quantitative papers published from 1985 to 2023.

The analysis revealed no single, universally accepted approach for measuring IC, with company attributes such as size, industry and location significantly influencing IC measurement methods. A key finding is human capital’s critical yet underrepresented role in firm competitiveness, which the IICM model aims to elevate.

This is the first SLR focused on IC measurement amid business uncertainty, providing insights for better management and navigating turbulence. The authors envisage future research exploring the interplay between IC components, technology, innovation and network-building strategies for business resilience. Additionally, there is a need to understand better the IC’s impact on specific industries (automotive, transportation and hospitality), Social Development Goals and digital transformation performance.

This study investigates the impact of entrepreneurial orientation (EO) and knowledge management (KM) on firm performance (PERF), as well as the mediating role of KM in the EO–PERF (EO-PERF relationship). In particular, this study aims to explain the impact of KM on the relationship between the EO dimensions and PERF; dimensions are risk-taking (RT), innovativeness (IN) and proactiveness (PR).

This study uses structural equation modelling and fuzzy-set qualitative comparative analysis (fsQCA) methodologies to explore target relationships. The sample consists of 150 small furniture manufacturers operating in Poland (out of 1,480 in the population).

The study findings show that KM partially mediates the IN–PERF relationship. Furthermore, fsQCA reveals that KM accompanied by IN is a core condition that leads to PERF. Moreover, the absence of KM (accompanied by the absence of RT and IN) leads to the absence of PERF. In addition, the results show that all the variables examined (RT, IN, PR and KM) positively impact PERF.

This study explores the role of KM in the context of EO and its impact on PERF in the low-tech industry. The study uses simultaneously two methodologies that represent different approaches in the search for the expected relationships. The findings reveal that KM mediates the EO-PERF relationship.