Search results

The purpose of this paper is to explore the effect of ZnO on the structure and properties of micro-arc oxidation (MAO) coating on rare earth magnesium alloy under large concentration gradient.

The macroscopic and microscopic morphology, thickness, surface roughness, chemical composition and structure of the coating were characterized by different characterization methods. The corrosion resistance of the film was studied by electrochemical and scanning Kelvin probe force microscopy. The results show that the addition of ZnO can significantly improve the compactness and corrosion resistance of the MAO coating, but the high concentration of ZnO will cause microcracks, which will reduce the corrosion resistance to a certain extent.

When the concentration of zinc oxide is 8 g/L, the compactness and corrosion resistance of the coating are the best, and the thickness of the coating is positively correlated with the concentration of ZnO.

Too high concentration of ZnO reduces the performance of MAO coating.

The MAO coating prepared by adding ZnO has good corrosion resistance. Combined with organic coatings, it can be applied in corrosive marine environments, such as ship parts and hulls. To a certain extent, it can reduce the economic loss caused by corrosion.

The effect of ZnO on the corrosion resistance of MAO coating in electrolyte solution was studied systematically, and the conclusion was new to the common knowledge.

This study aims to discuss the state-of-the-art digital factory (DF) development combining digital twins (DTs), sensing devices, laser additive manufacturing (LAM) and subtractive manufacturing (SM) processes. The current shortcomings and outlook of the DF also have been highlighted. A DF is a state-of-the-art manufacturing facility that uses innovative technologies, including automation, artificial intelligence (AI), the Internet of Things, additive manufacturing (AM), SM, hybrid manufacturing (HM), sensors for real-time feedback and control, and a DT, to streamline and improve manufacturing operations.

This study presents a novel perspective on DF development using laser-based AM, SM, sensors and DTs. Recent developments in laser-based AM, SM, sensors and DTs have been compiled. This study has been developed using systematic reviews and meta-analyses (PRISMA) guidelines, discussing literature on the DTs for laser-based AM, particularly laser powder bed fusion and direct energy deposition, in-situ monitoring and control equipment, SM and HM. The principal goal of this study is to highlight the aspects of DF and its development using existing techniques.

A comprehensive literature review finds a substantial lack of complete techniques that incorporate cyber-physical systems, advanced data analytics, AI, standardized interoperability, human–machine cooperation and scalable adaptability. The suggested DF effectively fills this void by integrating cyber-physical system components, including DT, AM, SM and sensors into the manufacturing process. Using sophisticated data analytics and AI algorithms, the DF facilitates real-time data analysis, predictive maintenance, quality control and optimal resource allocation. In addition, the suggested DF ensures interoperability between diverse devices and systems by emphasizing standardized communication protocols and interfaces. The modular and adaptable architecture of the DF enables scalability and adaptation, allowing for rapid reaction to market conditions.

Based on the need of DF, this review presents a comprehensive approach to DF development using DTs, sensing devices, LAM and SM processes and provides current progress in this domain.

To contribute to achieving the Sustainable Development Goals, this study aims to explore how to encourage innovative green behaviors among college students and the mechanisms behind the formation of green innovation behavior. Specifically, this study examines the influences of schools, mentors and college students themselves.

A multilevel, multisource study involving 261 students from 51 groups generally supported this study’s predictions.

Proenvironmental and responsible mentors significantly predicted innovative green behavior among college students. In addition, creative motivation mediated the logical chain among green intellectual capital, emotional intelligence and green innovation behavior.

The study findings offer new insights into the conditions required for college students to engage in green innovation. In addition, they provide practical implications for cultivating green innovation among college students.

The authors proposed and tested a multilevel theory based on the ability–motivation–opportunity framework. In this model, proenvironmental and responsible mentors, green intellectual capital and emotional intelligence triggered innovative green behavior among college students through creative motivation.

Contractors of different scales, operating in different construction industries of varying institutional and economic settings, have different considerations when making bid or no-bid and mark-up decisions. Focusing on the large and medium-sized contractors in the Jilin province, China, the purpose of this study is to examine important factors affecting their decision to bid (d2b) and mark-up decisions and investigate differences between large and medium-sized contractors in evaluating the importance of the various factors affecting their d2b and mark-up decisions.

This study used a survey design for timely data collection from a large population. Contractors’ bidding attitudes was collected using an online survey questionnaire with a list of 40 key factors. Statistical analytical methods were applied for comparing the two groups of contractors.

The results of this study indicate that factors related to client conditions are most critical for both large and medium-sized contractors in their d2b and mark-up decisions. The results also show statistically significant differences between the two groups of contractors on a subset of factors affecting their d2b and mark-up decisions. The large contractors have placed more emphasis on projects' potential financial and strategic benefits. Another notable finding is that both groups of contractors have placed great emphasise on “government legislations” in their d2b and mark-up decisions.

These findings should be interpreted in consideration of several limitations. Firstly, the sample size is relatively small, and the focus was on a single province in the China construction industry. Next, this study only explores differences between large and medium-sized contractors in evaluating the importance of the various factors affecting their d2b and mark-up decisions.

Contractors could refer list of critical factors in competing for jobs in Jilin province or other provinces of similar institutional and economic settings. Construction clients, on the other hand, should consider the list of critical factors in the formulation of their competitive tendering procedures, thus enhancing the efficiency in their procurement of construction services.

Research on contractors’ bidding decision-making in the context of Chinese construction industry remains scarce; the research findings have implications for the industry stakeholders.

This study intends to investigate the determinants of learners' continuance intention to use massive open online courses (MOOCs) for personal or professional development.

This study employed quantitative research design. The respondents were individual learners from six selected universities in China who used MOOCs for continuous learning. A purposive sampling technique was employed to obtain 270 valid samples. Data were analyzed and analytical outputs were produced using the techniques of Partial Least Squares Structural Equation Modeling and Importance-Performance Matrix.

Expectation confirmation was found to have a positive relationship with perceived usefulness, flow experience, learning self-efficacy and satisfaction with MOOCs. Perceived usefulness, flow experience and leaning self-efficacy were also found to have a positive relationship with MOOC satisfaction. In addition, perceived usefulness, flow experience, learning self-efficacy and MOOC satisfaction had a positive impact on continuance usage intention.

The outcomes of the study can serve as a practical reference for MOOC providers and decision-makers to develop relevant strategies to increase the course completion rates.

Based on the theory of reasoned action, this study aims to illustrate how employees’ safety behavior can be enhanced in the workplace by specifically examining how anticipated regret leads to workplace safety behavior and the contextual factor of organizational ethical climate.

The authors adopted a quantitative approach and designed their survey from validated scales in prior studies. Data were obtained from two different sources, including 149 employees and 31 immediate supervisors. Hierarchical linear modeling techniques were applied to test the hypotheses.

The results showed that anticipated regret was significantly related to safety compliance and safety participation; egoistic ethical climate was negatively correlated with safety compliance and safety participation, while benevolent ethical climate was only positively correlated with safety participation. For cross-level moderating effects, both benevolent and principle ethical climate moderate the relationship between anticipated regret and safety participation, whereas all three ethical climates did not moderate the relationship between anticipated regret and safety compliance.

It contributes to current literature by identifying critical determinants of employees’ safety behavior, which would enable practitioners to manage safety in the workplace and foster a safe working environment. Specifically, fostering benevolent ethical climate can better promote employees’ perceptions of the importance of discretionary safety behavior.

This study suggests that organizational practitioners could use the salience of anticipated regret to promote the safety behavioral intentions of employees in the workplace. Further, the authors examined a multilevel framework, which elaborates individual- and organizational-level antecedents of employee safety behavior as well as the impact of cross-level interactions on employee safety behavior.

As an advanced manufacturing method, additive manufacturing (AM) technology provides new possibilities for efficient production and design of parts. However, with the continuous expansion of the application of AM materials, subtractive processing has become one of the necessary steps to improve the accuracy and performance of parts. In this paper, the processing process of AM materials is discussed in depth, and the surface integrity problem caused by it is discussed.

Firstly, we listed and analyzed the characterization parameters of metal surface integrity and its influence on the performance of parts and then introduced the application of integrated processing of metal adding and subtracting materials and the influence of different processing forms on the surface integrity of parts. The surface of the trial-cut material is detected and analyzed, and the surface of the integrated processing of adding and subtracting materials is compared with that of the pure processing of reducing materials, so that the corresponding conclusions are obtained.

In this process, we also found some surface integrity problems, such as knife marks, residual stress and thermal effects. These problems may have a potential negative impact on the performance of the final parts. In processing, we can try to use other integrated processing technologies of adding and subtracting materials, try to combine various integrated processing technologies of adding and subtracting materials, or consider exploring more efficient AM technology to improve processing efficiency. We can also consider adopting production process optimization measures to reduce the processing cost of adding and subtracting materials.

With the gradual improvement of the requirements for the surface quality of parts in the production process and the in-depth implementation of sustainable manufacturing, the demand for integrated processing of metal addition and subtraction materials is likely to continue to grow in the future. By deeply understanding and studying the problems of material reduction and surface integrity of AM materials, we can better meet the challenges in the manufacturing process and improve the quality and performance of parts. This research is very important for promoting the development of manufacturing technology and achieving success in practical application.

This paper aims to present the fabrication of 6061 aluminum alloy (AA6061) using a promising laser additive manufacturing process, called the laser-foil-printing (LFP) process. The process window of AA6061 in LFP was established to optimize process parameters for the fabrication of high strength, dense and crack-free parts even though AA6061 is challenging for laser additive manufacturing processes due to hot-cracking issues.

The multilayers AA6061 parts were fabricated by LFP to characterize for cracks and porosity. Mechanical properties of the LFP-fabricated AA6061 parts were tested using Vicker’s microhardness and tensile testes. The electron backscattered diffraction (EBSD) technique was used to reveal the grain structure and preferred orientation of AA6061 parts.

The crack-free AA6061 parts with a high relative density of 99.8% were successfully fabricated using the optimal process parameters in LFP. The LFP-fabricated parts exhibited exceptional tensile strength and comparable ductility compared to AA6061 samples fabricated by conventional laser powder bed fusion (LPBF) processes. The EBSD result shows the formation of cracks was correlated with the cooling rate of the melt pool as cracks tended to develop within finer grain structures, which were formed in a shorter solidification time and higher cooling rate.

This study presents the pioneering achievement of fabricating crack-free AA6061 parts using LFP without the necessity of preheating the substrate or mixing nanoparticles into the melt pool during the laser melting. The study includes a comprehensive examination of both the mechanical properties and grain structures, with comparisons made to parts produced through the traditional LPBF method.

The current study investigates the impact on perceived review helpfulness of the simultaneous processing of information from multiple cues with various central and peripheral cue combinations based on the elaboration likelihood model (ELM). Thus, the current study develops and tests hypotheses by analyzing real-world review data with a text mining approach in e-commerce to investigate how information consistency (rating inconsistency, review consistency and text similarity) influences perceived helpfulness. Moreover, the role of product type is examined in online consumer reviews of perceived helpfulness.

The current study collected 61,900 online reviews, including 600 products in six categories, from Amazon.com. Additionally, 51,927 reviews were filtered that received helpfulness votes, and then text mining and negative binomial regression were applied.

The current study found that rating inconsistency and text similarity negatively affect perceived helpfulness and that review consistency positively affects perceived helpfulness. Moreover, peripheral cues (rating inconsistency) positively affect perceived helpfulness in reviews of experience goods rather than search goods. However, there is a lack of evidence to demonstrate the hypothesis that product types moderate the effectiveness of central cues (review consistency and text similarity) on perceived helpfulness.

Previous studies have mainly focused on numerical and textual factors to investigate the effect on perceived helpfulness. Additionally, previous studies have independently confirmed the factors that affect perceived helpfulness. The current study investigated how information consistency affects perceived helpfulness and found that various combinations of cues significantly affect perceived helpfulness. This result contributes to the review helpfulness and ELM literature by identifying the impact on perceived helpfulness from a comprehensive perspective of consumer review and information consistency.

This study aims to identify factors that can improve customer service performance by verifying the relationships between these factors, such as customer orientation, firm-specific resource integration, transactive memory system and service innovation capability. In other words, this study identifies the determinants of customer service performance from the perspective of the resource advantage theory of competition.

This research was conducted through an online survey of hotel managers and supervisors in Indonesia, which produced 327 questionnaires that could be processed with a response rate of 70.6%. Structural equation modelling was used to analyse the data and test the hypotheses with the help of AMOS 23.

This study confirms that firm-specific resource integration can improve customer service performance, with the antecedents of the former being customer orientation and a transactive memory system.

This research was conducted with a sample of three-, four- and five-star hotels, which have different conditions. In future research, it would be interesting to compare how such hotels over a larger geographical area behave in improving customer service performance using the investigated variables.

This research provides additional insight into the resource advantage theory of competition, namely, that integrated enterprise-specific resources are good antecedents for innovation and customer service performance.