Search results

This work aims to synthesize a series of novel acyclic and/or heterocyclic systems, as precursors for dyes with potential antimicrobial activity that could be used for simultaneous dyeing and antimicrobial textile finishing. Thus, a series of novel pyridine, thiophene and pyrazolo[3,4-b]pyridine derivatives were synthesized, and their antimicrobial and textile finishing properties were studied and evaluated.

The synthesis, structure elucidation and antimicrobial activities of the newly synthesized compounds based on 4,4-dicyano-3-phenyl-but-3-enoic acid phenylamide (1) were demonstrated. The minimal inhibitory concentration in μg/mL of the compounds showed significant antimicrobial activity against most of the tested organisms. On the other hand, their spectral characteristics and fastness properties were measured and evaluated. Antimicrobial activities of the dyed fabrics in terms of inhibition zones (mm) were measured and evaluated.

A series of novel heterocyclic compounds (Schemes 1-3) were synthesized based on starting material (1). Compounds (1), 2, 4a, 8a and 9c exhibited comparable or even higher antibacterial activities than the selected standards (ampicillin), while compounds 2, 3c, 3d, 4a and 8b revealed higher antifungal activities than the selected standard (cycloheximide). On the other hand, some dyes showed high antimicrobial evaluation on the dyed fabrics (nylon 66, acetate and polyester) expressed as size (mm) of inhibition zones (Tables I-IV).

Results revealed that many hydrazo and azo derivatives were synthesized from some pyridines and thiophenes. The antimicrobial evaluation and textile finishing of the newly synthesized products revealed significant and potent values of antimicrobial activity.

All the synthesized compounds were novel and most of them exhibited higher antimicrobial activities than the selected standards antibiotics, thus are valuable for simultaneous dyeing and antimicrobial functional finishing of textile fabrics.

GOOD looks and long life are prime interests of any aircraft user, especially airline operators. Finishing products, particularly paints and anti‐corrosive treatments, play a vital role in manufacture, operation and maintenance. The special demands of aviation, including the abrasive conditions of high speed flight, place a premium on highly durable finishes, whether designed for exterior fuselage application or internal protection of essential components. In fact, every part of the structure should be protected by an anti‐corrosion coating.

The purpose of this paper is to demonstrate the rationale, technical framework, content creation workflow and evaluation for a multilingual massive open online course (MOOC) to facilitate information literacy (IL) considering cultural aspects.

A good practice analysis built the basis for the technical and content framework. The evaluation approach consisted of three phases: first, the students were asked to fill out a short self-assessment questionnaire and a shortened adapted version of a standardized IL test. Second, they completed the full version of the IL MOOC. Third, they were asked to fill out the full version of a standardized IL test and a user experience questionnaire.

The results show that first the designed workflow was suitable in practice and led to the implementation of a full-grown MOOC. Second, the implementation itself provides implications for future projects developing multilingual educational resources. Third, the evaluation results show that participants achieved significantly higher results in a standardized IL test after attending the MOOC as mandatory coursework. Variations between the different student groups in the participating countries were observed. Fourth, self-motivation to complete the MOOC showed to be a challenge for students asked to attend the MOOC as nonmandatory out-of-classroom task. It seems that multilingual facilitation alone is not sufficient to increase active MOOC participation.

This paper presents an innovative approach of developing multilingual IL teaching resources and is one of the first works to evaluate the impact of an IL MOOC on learners' experience and learning outcomes in an international evaluation study.

The study aims to introduce a cloud-based virtual reality (VR) approach and investigate its applicability and performance in aiding the remote design evaluation process by assessing the clients' convenience perception toward cloud-based VR-aided design evaluation (Cloud-based VR Approach) compared to 3D model-aided design evaluation (3D Model Approach) and rendering images-aided design evaluation (Image Approach).

A multicriteria comparative study was conducted with 26 university students using the “analytic hierarchy process” technique to compare the three approaches applied to home finishing material selection tasks based on the five “service convenience” dimensions, consisting of access convenience, decision convenience, transaction convenience, benefit convenience and post-benefit convenience.

The results indicated that the “Cloud-based VR Approach” was perceived to be more convenient than the “3D Model Approach” and the “Image Approach” based on the aspects of “decision convenience”, “transaction convenience”, “benefit convenience” and “post-benefit convenience”. The only aspect that the Cloud-based VR Approach was comparatively less convenient than the 3D Model Approach and Image Approach for the user was “access convenience”. Overall, the findings showed that the developed Cloud-based VR Approach had more potential than the conventional approaches in aiding the design evaluation process under ongoing social distancing measures requiring designers and clients to work remotely.

The disastrous impacts of the COVID-19 pandemic on logistical systems have resulted in massive disruptions to the construction industry worldwide. Various construction activities have been halted and most meetings moved online. Design evaluation conducted between clients and designers is one of the important activities affected by such an impact. Thus, this study presents the Cloud-based VR Approach as an innovative means to maintain essential ongoing activities and meeting of the current design evaluation approach with respect to the social distancing measures.

Examines the eleventh published year of the ITCRR. Runs the whole gamut of textile innovation, research and testing, some of which investigates hitherto untouched aspects. Subjects discussed include cotton fabric processing, asbestos substitutes, textile adjuncts to cardiovascular surgery, wet textile processes, hand evaluation, nanotechnology, thermoplastic composites, robotic ironing, protective clothing (agricultural and industrial), ecological aspects of fibre properties – to name but a few! There would appear to be no limit to the future potential for textile applications.

There are many practical difficulties facing managers who decide to venture into the field of Expert Systems. They will have to cope with both technological and human problems. Care must be taken in choosing the application, software house, hardware and software. A company may decide to build an Expert System in‐house, in which case it will need the right sort of Knowledge Engineer(s). The system must be of obvious benefit to the user otherwise it will fail. Knowledge Acquisition for Expert Systems is difficult, but possible if handled properly. The users of the system must be involved in its design and evaluation and a methodology for doing so is suggested. Managers can no longer pay lip service to the concept of user involvement in the design and implementation of new technology.

The purpose of this study is to establish a suitable procedure for dyeing and multifunctional finishing on 100% cotton using extracts of eucalyptus leaves in an eco-friendly manner.

Box–Behnken design of experiments and analysis of variance (ANOVA) were used to optimise the conditions of extraction, dyeing and finishing. Phytochemical analysis was performed to determine the chemical constituents of the extracts. Colour strength, fastness properties were evaluated for dyed fabric samples. The effectiveness of eucalyptus leaves extract as an insect repellent, aroma, antibacterial finishing agent, was assessed. Pre-soaking and padding method was used for the application of active essential oil on the fabric.

Essential oil extracted from Eucalyptus globulus leaves have great repellent rate for insects to the extent of 90% and aroma intensity of 72% and antibacterial effect of 100% bacterial reduction up to five washings. The use of citric acid as cross-linking agent helps increase the durability of the finish. Natural dyeing to get light yellow shade is possible with extracts made with water, possessing good fastness properties.

Scaling up the extraction process and soaking larger quantities of fabrics in extracted essential oil solution before the pad applications are considered limitations of this study. However, smaller pieces of fabrics can conveniently be handled in this process. It has tremendous potential for practising industrially, to get yellow-shaded multifunctional finished cotton textiles.

Protection against insects, including mosquitoes, bacteria with additional aroma on cotton will be of great use in day-to-day life for the wearer.

Eco-friendly, renewable sources of ingredients from the plant were used to obtain protection against pathogenic or odour-causing microorganisms using this hygiene finish with multiple end uses.

This original work enables conducting dyeing and multifunctional finishing together in a single stage, which otherwise takes a number of steps, consuming large quantities of water, chemicals and energy to impart similar effects on cotton.

The purpose of this research is to perform instrumental comparison of hand parameters of knitted fabrics produced from different biodegradable fibres and to analyze peculiarities of hand parameters' extent influenced by fabric structure and chemical softening.

The hand of five types of different biodegradable fabrics was evaluated. Experiments were performed using a method based on the principle of specimen biaxial punching deformation when a disc‐shaped specimen is extracted through a round nozzle. The Influence of fabric weave (terry and plain jersey) and finishing (padding with the silicone softener “Belfasin SI”) on the fabric hand was investigated.

Investigations have shown that weave type and finishing significantly influenced fabric hand properties. It was also stated that even tenuous differences between fabric parameters could be obtained by one numeral value of complex hand rate Q.

Experiments have shown that KTU–Griff–Tester is a simple, reliable instrumental device suitable to obtain quantitative information about fabric mechanical properties. Evaluation of finishing influence on a fabric hand could be precisely expressed by one parameter Q.

In the present research quantitative evaluation of new fabrics from biodegradable fibres hand was performed. Comparison between new biodegradable and traditional cotton fabrics has shown that new biodegradable fibres which are generally used for underwear, sportswear and for medical application are characterized by soft hand, as a result a good affinity with skin.

Examines the twelfth published year of the ITCRR. Runs the whole gamut of textile innovation, research and testing, some of which investigates hitherto untouched aspects. Subjects discussed include cotton fabric processing, asbestos substitutes, textile adjuncts to cardiovascular surgery, wet textile processes, hand evaluation, nanotechnology, thermoplastic composites, robotic ironing, protective clothing (agricultural and industrial), ecological aspects of fibre properties – to name but a few! There would appear to be no limit to the future potential for textile applications.

Textiles are a suitable substrate for the growth of micro-organisms, especially at appropriate humidities and temperatures, when in contact with the human body. Due to the awareness that healthcare textiles enhance the quality of life, antimicrobials and antibacterial textiles have received, and continue to receive, considerable attention from researchers due to their potential to provide quality and safety benefits to many products. However, antimicrobial agents and antibacterial finishing processes have not grown in number because of possible harmful or toxic effects on humans and the environment. The application of rechargeable, safe antimicrobial agents and eco-friendly antibacterial finishing processes are being studied. This paper analyzes the disadvantages and advantages of antimicrobials and antibacterial finishing processes and finds suitable antimicrobials and antibacterial finishing processes for cotton. It is anticipated that the review will be a good resource for those who are interested in antimicrobials and biocidal textile materials, and will help to stimulate further interest in this area.