Search results

The purpose of this paper, is to solve the problem of finite-time fault-tolerant attitude synchronization and tracking control of multiple rigid bodies in presence of model uncertainty, external disturbances, actuator faults and saturation. It is assumed that the rigid bodies in the formation may encounter loss of effectiveness and/or bias actuator faults.

For the purpose, adaptive terminal sliding mode control and neural network structure are used, and a new sliding surface is proposed to guarantee known finite-time convergence not only at the reaching phase but also on the sliding surface. The sliding surface is then modified using a proposed auxiliary system to maintain stability under actuator saturation.

Assuming that the communication topology between the rigid bodies is governed by an undirected connected graph and the upper bounds on the actuators’ faults, estimation error of model uncertainty and external disturbance are unknown, not only the attitudes of the rigid bodies in the formation are synchronized but also they track the time-varying attitude of a virtual leader. Using Lyapunov stability approach, finite-time stability of the proposed control algorithms demonstrated on the sliding phase as well as the reaching phase. The effectiveness of the proposed algorithm is also validated by simulation.

The proposed controller has the advantage that the need for any fault detection and diagnosis mechanism and the upper bounds information on estimation error and external disturbance is eliminated.

To solve the above problems and ensure the stability of the ad hoc network node topology in the process of wireless signal transmission, this paper aims to design a robust adaptive sliding film fault-tolerant controller under the nonlinear distortion of signal transmission in an amorphous flat air-to-ground wireless ad hoc network system.

This paper designs a robust adaptive sliding film fault-tolerant controller under the nonlinear distortion of signal transmission in an amorphous flat air-to-ground wireless ad hoc network system.

The simulation results show that the amorphous flat wireless self-organizing network system has good nonlinear distortion fault-tolerant correction ability under the feedback control of the designed controller, and the system has the asymptotically stable convergence ability; the test results show: the node topology of the self-organizing network structural stability is significantly improved, which provides a foundation for the subsequent realization of long-distance transmission of ad hoc network nodes.

Because of the chosen research approach, the research results may lack generalizability. Therefore, researchers are encouraged to test the proposed propositions further.

The controller can extract the fault information caused by nonlinear distortion in the wireless signal transmission process, and at the same time, its feedback matrix K can gradually converge the generated wireless signal error to zero, to realize the stable transmission of the wireless signal.

There have been limited investigations on the mechanical characteristics of tunnels supported by corrugated plate structures during fault dislocation. The authors obtained circumferential and axial deformations of the spiral corrugated pipe at various fault displacements. Lastly, the authors examined the impact of reinforced spiral stiffness and soil constraints on the support performance of corrugated plate tunnels under fault displacement.

By employing the theory of similarity ratios, the authors conducted model tests on spiral corrugated plate support using loose sand and PVC (polyvinyl chloride) spiral corrugated PE pipes for cross-fault tunnels. Subsequently, the soil spring coefficient for tunnel–soil interaction was determined in accordance with ASCE (American Society of Civil Engineers) specifications. Numerical simulations were performed on spiral corrugated pipes with fault dislocation, and the results were compared with the experimental data, enabling the determination of the variation pattern of the soil spring coefficient.

The findings indicate that the maximum axial tensile and compressive strains occur on both sides of the fault. As the reinforced spiral stiffness reaches a certain threshold, the deformation of the corrugated plate tunnel and the maximum fault displacement stabilize. Furthermore, a stronger soil constraint leads to a lower maximum fault displacement that the tunnel can withstand.

In this study, the calculation formula for density similarity ratio cannot be taken into account due to the limitations of the helical corrugated tube process and the focus on the deformation pattern of helical corrugated tubes under fault action.

This study provides a basis for the mechanical properties of helical corrugated tube tunnels under fault misalignment and offers optimization solutions.

The purpose of the paper is to design a nonlinear dynamic inversion (NDI) based robust fault-tolerant control (FTC) for aircraft longitudinal dynamics subject to system nonlinearities, aerodynamic parametric variations, external wind disturbances and fault/failure in actuator.

An uncertainty and disturbance estimator (UDE) technique is used to provide estimate of total disturbance enabling its rejection and thereby achieving robustness to the proposed NDI controller. As needed in the NDI design, the successive derivatives of the output are obtained through an UDE robustified observer making the design implementable. Further, a control allocation scheme consigns control command from primary actuator to the secondary one in the event of fault/failure in the primary actuator.

The robustness is achieved against the perturbations mentioned above in the presence of actuator fault/failure.

Lyapunov analysis proves practical stability of the controller–observer structure. The efficacy and superiority of the proposed design has been demonstrated through Monte-Carlo simulation.

Unlike in many FTC designs, robustness is provided against system nonlinearities, aerodynamic parametric variations, external wind disturbances and sinusoidal input disturbance using a single control law which caters for fault-free, as well as faulty actuator scenario.

The purpose of this paper is to accomplish robust actuator fault isolation and identification for microsatellite attitude control systems (ACSs) subject to a series of space disturbance torques and gyro drifts.

For the satellite attitude dynamics with Lipschitz constraint, a multi-objective nonlinear unknown input observer (NUIO) is explored to accomplish robust actuator fault isolation based on a synthesis of H_inf techniques and regional pole assignment technique. Subsequently, a novel disturbance-decoupling learning observer (D²LO) is proposed to identify the isolated actuator fault accurately. Additionally, the design of the NUIO and the D²LO are reformulated into convex optimization problems involving linear matrix inequalities (LMIs), which can be readily solved using standard LMI tools.

The simulation studies on a microsatellite example are performed to prove the effectiveness and applicability of the proposed robust actuator fault isolation and identification methodologies.

This research includes implications for the enhancement of reliability and safety of on-orbit microsatellites.

This study proposes novel NUIO-based robust fault isolation and D²LO-based robust fault identification methodologies for spacecraft ACSs subject to a series of space disturbance torques and gyro drifts.

The paper takes the air-ground integrated wireless ad hoc network-integrated system as the research object, this paper aims to propose a distributed robust H_∞ adaptive fault-tolerant control algorithm suitable for the system to distribute to solve the problem of control and communication failure at the same time.

In the paper, the authors propose a distributed robust H_∞ adaptive fault-tolerant control algorithm suitable for the air-ground integrated wireless ad hoc network-integrated system.

The results show that the integrated system has good robustness and fault tolerance performance indicators for flight control and wireless signal transmission when confronted with external disturbances, internal actuator failures and wireless network associated failures and the flight control curve of the quadrotor unmanned aerial vehicle (UAV) is generally smooth and stable, even if it encounters external disturbances and actuator failures, its fault tolerance performance is very good. Then in the range of 400–800 m wireless communication distance, the success rate of wireless signal loop transmission is stable at 80%–100% and the performance is at least relatively improved by 158.823%.

This paper takes the air-ground integrated wireless ad hoc network-integrated system as the research object, based on the robust fault-tolerant control algorithm, the authors propose a distributed robust H_∞ adaptive fault-tolerant control algorithm suitable for the system and through the Riccati equation and linear matrix inequation method, the designed distributed robust H_∞ adaptive fault-tolerant controller further optimizes the fault suppression factor γ, so as to break through the limitation of only one Lyapunov matrix for different fault modes to distribute to solve the problem of control and communication failure at the same time.

Quadrotors have been applied in various fields. However, because the quadrotor is subject to multiple disturbances, consisting of external disturbances, actuator faults and parameter uncertainties, it is difficult to control the unmanned aerial vehicle (UAV) to achieve high-precision tracking performance. This paper aims to design a safety controller that uses observer and neural network method to improve the tracking performance of UAV under multiple disturbances. The experiments prove that this method is effective.

First, to actively estimate and compensate the synthetic uncertainties of the system, a finite-time extended state observer is investigated, and the disturbances are transformed into the extended state of the system for estimation. Second, an adaptive neural network controller that does not accurately require the dynamic model knowledge is designed based on the estimated value, where the weights of the neural network can be dynamically adjusted by the adaptive law. Furthermore, the finite-time bounded convergence of the proposed observer and the stability of the system are proved through homogeneous theory and Lyapunov method.

The figure-“8” climbing flight simulation and real flight experiments illustrate that the proposed safety control strategy has good tracking performance.

This paper proposes the safety control structure of the UAV, which combines the extended state observer with the neural network method. Numerical simulation results and actual flight experiments demonstrate the effectiveness of the proposed control strategy.

Accurate glide path tracking is vital to the automatic carrier landing task of unmanned aerial vehicle (UAV). The purpose of this paper is to develop a reliable flight controller that can simultaneously deal with external disturbance, structure fault and actuator fault.

The automatic carrier landing task is resolved into the glide path tracking problem and attitude tracking problem. The disturbance observer-based adaptive sliding mode control scheme is proposed for system stabilization, disturbance rejection and fault tolerance.

Both the Lyapunov method and exemplary simulations can prove that the disturbance estimation error and the attitude tracking error converge in finite time in the presence of external disturbances and various faults.

The presented algorithm is testified by a UAV automatic carrier landing simulation, which shows the potential of practical usage.

The barrier function is introduced to adaptively update both the sliding mode observer gain and sliding mode controller gain, so that the sliding mode surface could converge to a predefined region without overestimation. The proposed flight controller ensures a secure carrier landing task.

The purpose of this paper is to propose an adaptive neural-sliding mode-based observer for the estimation and reconstruction of unknown faults and disturbances for time-varying nonlinear systems such as aircraft, to ensure preciseness in the diagnosis of fault magnitude as well as the shape without enhancement of system complexity and cost. Fault-tolerant control (FTC) strategy based on adaptive neural-sliding mode is also proposed in the existence of faults for ensuring the stability of the faulty system.

In this paper, three strategies are presented: adaptive radial basis functions neural network (ARBFNN), conventional radial basis functions neural network (CRBFNN) and integral-chain differentiator. For the purpose of enhancement of fault diagnosis and isolation, a new sliding mode-based concept is introduced for the weight updating parameters of radial basis functions neural network (RBFNN).The main objective of updating the weight parameters adaptively is to enhance the effectiveness of fault diagnosis and isolation without increasing the computational complexities of the system. Results depict the effectiveness of the proposed ARBFNN approach in fault detection (FD) and approximation compared to CRBFNN, integral-chain differentiator and schemes existing in literature. In the second step, the FTC strategy is presented separately for each observer in the presence of unknown faults and failures for ensuring the stability of the system, which is validated on Boeing 747 100/200 aircraft.

The proposed adaptive neural-sliding mode approach is investigated, which depicts more effectiveness in numerous situations such as faults, disturbances and uncertainties compared to algorithms used in literature. In this paper, both the fault approximation and isolation and the fault tolerance approaches are studied.

For the enhancement of safety level as well as for avoiding any kind of damage, timely FD and fault tolerance have always had a significant role; therefore, the algorithms proposed in this research ensure the tolerance of faults and failures, which plays a vital role in practical life for avoiding any kind of damage.

In this study, a new neural-sliding mode concept is adopted for the adaptive faults approximation and reconstruction, and then the FTC algorithms are studied for each observer separately, whereas in previous studies, only the fault detection and isolation (FDI) or the fault tolerance problems were studied. Results demonstrate the effectiveness of the proposed strategy compared to the approaches given in the literature.

The purpose of this study is to propose an adaptive fault-tolerant control approach based on output feedback for a class of quadrotor unmanned aerial vehicles system. In the event of a controlled actuator failure, a stable flying of the aircraft can be achieved by selecting an appropriate sliding mode surface.

Aiming at the actuator failure of quadrotor aircraft during flight in the controllable range, a dynamic surface sliding mode passive fault-tolerant controller based on output feedback is designed based on the strong robustness of sliding mode method. Due to the unknown nonlinearity dynamics and parameter uncertainties in the system, a nonlinear observer is used to estimate them online.

The stability of the suggested algorithm is established using appropriate Lyapunov functions, and the performance of the proposed control approach is demonstrated using hardware-in-the-loop simulation.

An error performance function is introduced into the controller to ensure the convergence speed and accuracy of errors are within the predetermined range. By using the norm estimation method, there is only one parameter that needs to be updated in each step of the control process, which considerably minimizes the calculation burden. Finally, the validity of the proposed control scheme is verified on the hardware-in-the-loop simulation, and the results show that the proposed control method has achieved the desired results.