Search results

The purpose of this paper is to achieve high-precision sliding mode control without chattering; the control parameters are easy to adjust, and the entire controller is easy to use in engineering practice.

Using double sliding mode surfaces, the gain of the control signal can be adjusted adaptively according to the error signal. A kind of sliding mode controller without chattering is designed and applied to the control of ultrasonic motors.

The results show that for a position signal with a tracking amplitude of 35 mm, the traditional sliding mode control method has a maximum tracking error of 0.3326 mm under the premise of small chattering; the boundary layer sliding mode control method has a maximum tracking error of 0.3927 mm without chattering, and the maximum tracking error of continuous switching adaptive sliding mode control is 0.1589 mm, and there is no chattering. Under the same control parameters, after adding a load of 0.5 kg, the maximum tracking errors of the traditional sliding mode control method, the boundary layer sliding mode control method and the continuous switching adaptive sliding mode control are 0.4292 mm, 0.5111 mm and 0.1848 mm, respectively.

The proposed method not only switches continuously, but also the amplitude of the switching signal is adaptive, while maintaining the robustness of the conventional sliding mode control method, which has strong engineering application value.

The purpose of the study is to design a three-dimensional (3D) triglide parallel robot with a different approach and to control the manufactured robot via sliding mode control method that has not been applied to the robot before.

The x, y and z coordinates of the end effector of the robot have been given as a reference. The x, y and z reference values are transformed as new reference values of the vertical movement of the robot on the endless screw by using the inverse kinematic equations of the robot. The control of the robot over these reference values is provided by a sliding mode control. The MATLAB/real-time toolbox has been used for creating the interface. The real-time control of the triglide robot has been carried out with a sliding mode controller in the Simulink environment.

When the results of the sliding mode control are examined, it is seen that the desired reference values are provided in about 0.6 s. The velocity of the sliding limbs in each arm of the robot is approximately 50 mm/s. The reference values have been reached using the sliding mode control method, with an average error of 0.01 mm. In addition, the problem of chattering in the system caused by using the sign function has been relatively eliminated by using the saturation function instead of the sign function. Thus, the sliding mode control method with saturation function is more feasible.

In this study, the triglide parallel robot was manufactured using a 3D model after taking into consideration the dimensions of the 3D model. After production, the necessary hardware connections were provided, and a real-time sliding mode control method was implemented to the robot by using the interface program in MATLAB/Simulink environment. The literature contribution of the paper is the real-time control of the triglide robot with the sliding mode control method.

The purpose of this paper is to propose an indirect design for sliding surface as a function of position and velocity of each joint (for mounted manipulator on base) and center of mass of mobile base which includes rotation of wheels. The aim is to control the mobile base and its mounted arms using a unified sliding surface.

A new implementation of sliding mode control has been proposed for wheeled mobile manipulators, regulation and tracking cases. In the conventional sliding mode design, the position and velocity of each coordinate are often considered as the states in the sliding surface, and consequently, the input control is found based on them. A mobile robot consisted of non-holonomic constraints, makes the definition of the sliding surface more complex and it cannot simply include the coordinates of the system.

Formulism of both sliding mode control and non-singular terminal sliding mode control were presented and implemented on Scout robot. The simulations were validated with experimental studies, which led to satisfactory analysis. The non-singular terminal sliding mode control actually had a better performance, as it was illustrated that at time 10 s, the error for that was only 8.4 mm, where the error for conventional sliding mode control was 11.2 mm.

This work proposes sliding mode and non-singular terminal sliding mode control structure for wheeled mobile robot with a sliding surface including state variables: center of mass of base, wheels’ rotation and arm coordinates.

The purpose of this paper is to investigate the stabilization of unstable periodic orbits of Chua’s system using adaptive fuzzy sliding mode controllers with moving surface.

For this aim, the sliding mode controller and fuzzy systems are combined to achieve the stabilization. Then, the authors propose a moving sliding surface to improve robustness against uncertainties during the reaching phase, parameter variations and extraneous disturbances.

Afterward, the authors design a sliding observer to estimate the unmeasurable states which are used in the previously designed controller.

Numerical results are provided to show the effectiveness and robustness of the proposed method.

This study aims to propose an adaptive fractional-order sliding mode controller to solve the problem of train speed tracking control and position interval control under disturbance environment in moving block system, so as to improve the tracking efficiency and collision avoidance performance.

The mathematical model of information interaction between trains is established based on algebraic graph theory, so that the train can obtain the state information of adjacent trains, and then realize the distributed cooperative control of each train. In the controller design, the sliding mode control and fractional calculus are combined to avoid the discontinuous switching phenomenon, so as to suppress the chattering of sliding mode control, and a parameter adaptive law is constructed to approximate the time-varying operating resistance coefficient.

The simulation results show that compared with proportional integral derivative (PID) control and ordinary sliding mode control, the control accuracy of the proposed algorithm in terms of speed is, respectively, improved by 25% and 75%. The error frequency and fluctuation range of the proposed algorithm are reduced in the position error control, the error value tends to 0, and the operation trend tends to be consistent. Therefore, the control method can improve the control accuracy of the system and prove that it has strong immunity.

The algorithm can reduce the influence of external interference in the actual operating environment, realize efficient and stable tracking of trains, and ensure the safety of train control.

The purpose of this paper is to find a practical active sliding mode control approach for synchronization of two uncertain chaotic systems.

Sliding mode control approach is known to be an efficient alternative way to implement synchronization for uncertain chaotic systems. However, design of traditional sliding mode controller usually needs complex state transformation. Owing to a novel idea of virtual state feedback, a control strategy for synchronization of uncertain chaotic systems is presented, which does not need any complex state transformation. Furthermore, based on Lyapunov stability theory, a sufficient condition is drawn for the robust stability of the error dynamics of synchronization for uncertain chaotic systems.

A novel active sliding mode control approach is proposed to achieve the synchronization of two uncertain chaotic systems.

The main limitation is that uncertainties must meet matched conditions.

The paper presents a useful control approach for synchronization of two uncertain chaotic systems.

The proposed sliding mode control approach based on novel virtual state feedback does not need any complex state transformation, unlike the traditional sliding mode control.

The purpose of this paper is to present a sliding mode attitude controller for reusable launch vehicle (RLV) which is nonlinear, coupling, and includes uncertain parameters and external disturbances.

A smooth second-order nonsingular terminal sliding mode (NTSM) controller is proposed for RLV in reentry phase. First, a NTSM manifold is proposed for finite-time convergence. Then a smooth second sliding mode controller is designed to establish the sliding mode. An observer is utilized to estimate the lumped disturbance and the estimation result is used for feedforward compensation in the controller.

It is mathematically proved that the proposed sliding mode technique makes the attitude tracking errors converge to zero in finite time and the convergence time is estimated. Simulations are made for RLV through the assumption that aerodynamic parameters and atmospheric density are perturbed. Simulation results demonstrate that the proposed control strategy is effective, leading to promising performance and robustness.

By the proposed controller, the second-order sliding mode is established. The attitude tracking error converges to zero in a finite time. Meanwhile, the chattering is alleviated and a smooth control input is obtained.

In the multi-splitting transmission lines extreme power environment of ultra-high voltage and strong electromagnetic interference, to improve the trajectory tracking and stability control performance of the robot manipulator when conduct electric power operation, and effectively reduce the influence of disturbance factors on the robot motion control, this paper aims to presents a robust trajectory tracking motion control method for power cable robot manipulators based on sliding mode variable structure control theory.

Through the layering of aerial-online-ground robot three-dimensional control architecture, the robot joint motion dynamic model has been built, and the motion control model of the N-degrees of freedom robot system has also been obtained. On this basis, the state space expression of joint motion control under disturbance and uncertainty has been also derived, and the manipulator sliding mode variable structure trajectory tracking control model has also been established. The influence of the perturbation control parameters on the robot motion control can be compensated by the back propagation neural network learning, the stability of the controller has been analyzed by using Lyapunov theory.

The robot has been tested on a analog line in the lab, the effectiveness of sliding mode variable structure control is verified by trajectory tracking simulation experiments of different typical signals with different methods. The field operation experiment further verifies the engineering practicability of the control method. At the same time, the control method has the remarkable characteristics of sound versatility, strong adaptability and easy expansion.

Three-dimensional control architecture of underground-online-aerial robots has been proposed for industrial field applications in the ubiquitous power internet of things environment (UPIOT). Starting from the robot joint motion, the dynamic equation of the robot joint motion and the state space expression of the robot control system have been established. Based on this, a robot closed-loop trajectory tracking control system has been designed. A robust trajectory tracking motion control method for robots based on sliding mode variable structure theory has been proposed, and a sliding mode control model for the robot has been constructed. The uncertain parameters in the control model have been compensated by the neural network in real-time, and the sliding mode robust control law of the robot manipulator has been solved and obtained. A suitable Lyapunov function has been selected to prove the stability of the system. This method enhances the expansibility of the robot control system and shortens the development cycle of the controller. The trajectory tracking simulation experiment of the robot manipulator proves that the sliding mode variable structure control can effectively restrain the influence of disturbance and uncertainty on the robot motion stability, and meet the design requirements of the control system with fast response, high tracking accuracy and sound stability. Finally, the engineering practicability and superiority of sliding mode variable structure control have been further verified by field operation experiments.

The aims of the paper are to improve the dynamic response of an induction motor based position servo system and to remove the chattering problem in the sliding mode control theory by using fuzzy logic principles. The obtained results are also compared with conventional sliding mode controller to show its performance.

The main method used for the research is to form a thin boundary layer neighboring the switching surface by using fuzzy logic. The sliding mode control law is inherently discontinuous naturally. Therefore, there are some difficulties such as so many switches occurring between the control bounds, which cannot be carried out by real controllers. Therefore, fuzzy logic is used in the thin boundary layer to determine the control signal current. Thus, the chattering is eliminated.

The results show that the designed controller has superior performance. But, there are also some difficulties. It is difficult to obtain fuzzy rules. The rules can be obtained by using genetic algorithms without expert's knowledge. However, sliding surface slope C can be optimized to increase system's dynamic performance.

A new boundary layer consisting of the fuzzy rules in the sliding mode control is formed.

The purpose of this paper is to find an appropriate sliding mode control strategy for neutral systems with time‐delays in the presence of unmatched parameter uncertainties and external disturbance.

Owing to the complexity of uncertain neutral time‐delay systems, some conclusions for system stability and stabilization are complicated non‐linear matrix inequality (NLMI). Through virtual state feedback control, a sliding mode controller is designed to guarantee state trajectories from any initial condition are attracted to the sliding mode plane in a finite time and remain there for all subsequent time, which can avoid the complicated NLMI. Furthermore, a delay‐independent sufficient condition for the design of robust stable sliding mode plane is obtained in term of LMI.

The sliding mode controller for uncertain neutral time‐delay systems is designed and a delay‐independent sufficient condition for the design of robust stable sliding mode plane is obtained.

The main limitations are that external disturbance must meet matched condition.

A useful control strategy for uncertain neutral systems with time‐delays.

The virtual state feedback control is designed so to avoid the complicated NLMI.