Search results

To solve the above problems and ensure the stability of the ad hoc network node topology in the process of wireless signal transmission, this paper aims to design a robust adaptive sliding film fault-tolerant controller under the nonlinear distortion of signal transmission in an amorphous flat air-to-ground wireless ad hoc network system.

This paper designs a robust adaptive sliding film fault-tolerant controller under the nonlinear distortion of signal transmission in an amorphous flat air-to-ground wireless ad hoc network system.

The simulation results show that the amorphous flat wireless self-organizing network system has good nonlinear distortion fault-tolerant correction ability under the feedback control of the designed controller, and the system has the asymptotically stable convergence ability; the test results show: the node topology of the self-organizing network structural stability is significantly improved, which provides a foundation for the subsequent realization of long-distance transmission of ad hoc network nodes.

Because of the chosen research approach, the research results may lack generalizability. Therefore, researchers are encouraged to test the proposed propositions further.

The controller can extract the fault information caused by nonlinear distortion in the wireless signal transmission process, and at the same time, its feedback matrix K can gradually converge the generated wireless signal error to zero, to realize the stable transmission of the wireless signal.

Reliability of RAM memory systems is impaired by environmental disturbances, causing soft errors, whereby one data bit is transformed to another bit. Single‐error correcting codes with memory scrubbing offer the most effective method to recover from such errors. This paper analyzes the reliability and determines the MTTF for simplex and duplex memory systems with single‐error correction and/or soft‐error scrubbing recovery. It extends previous work on the deterministic scrubbing recovery of simplex memory systems by using a more general model that takes into account cancelling soft errors. In the duplex memory system an additional level of static redundancy is proposed by employing a decoding algorithm at the memory module level. The reliability analysis of the duplex system with soft‐error scrubbing takes into account the decoder output which upon scrubbing transforms words with a number of multiple errors to words with a different number of errors. Computer results show that this combination of data and system redundancy provides more reliability than either data or system redundancy alone.

In this paper, the authors take an amorphous flattened air-ground wireless self-assembling network system as the research object and focus on solving the wireless self-assembling network topology instability problem caused by unknown control communication faults during the operation of this system.

In the paper, the authors propose a neural network-based direct robust adaptive non-fragile fault-tolerant control algorithm suitable for the air-ground integrated wireless ad hoc network integrated system.

The simulation results show that the system eventually tends to be asymptotically stable, and the estimation error asymptotically tends to zero with the feedback adjustment of the designed controller. The system as a whole has good fault tolerance performance and autonomous learning approximation performance. The experimental results show that the wireless self-assembled network topology has good stability performance and can change flexibly and adaptively with scene changes. The stability performance of the wireless self-assembled network topology is improved by 66.7% at maximum.

The research results may lack generalisability because of the chosen research approach. Therefore, researchers are encouraged to test the proposed propositions further.

This paper designs a direct, robust, non-fragile adaptive neural network fault-tolerant controller based on the Lyapunov stability principle and neural network learning capability. By directly optimizing the feedback matrix K to approximate the robust fault-tolerant correction factor, the neural network adaptive adjustment factor enables the system as a whole to resist unknown control and communication failures during operation, thus achieving the goal of stable wireless self-assembled network topology.

Taking into consideration the current human need for agricultural produce such as rice that requires water for growth, the optimal consumption of this valuable liquid is important. Unfortunately, the traditional use of water by humans for agricultural purposes contradicts the concept of optimal consumption. Therefore, designing and implementing a mechanized irrigation system is of the highest importance. This system includes hardware equipment such as liquid altimeter sensors, valves and pumps which have a failure phenomenon as an integral part, causing faults in the system. Naturally, these faults occur at probable time intervals, and the probability function with exponential distribution is used to simulate this interval. Thus, before the implementation of such high-cost systems, its evaluation is essential during the design phase.

The proposed approach included two main steps: offline and online. The offline phase included the simulation of the studied system (i.e. the irrigation system of paddy fields) and the acquisition of a data set for training machine learning algorithms such as decision trees to detect, locate (classification) and evaluate faults. In the online phase, C5.0 decision trees trained in the offline phase were used on a stream of data generated by the system.

The proposed approach is a comprehensive online component-oriented method, which is a combination of supervised machine learning methods to investigate system faults. Each of these methods is considered a component determined by the dimensions and complexity of the case study (to discover, classify and evaluate fault tolerance). These components are placed together in the form of a process framework so that the appropriate method for each component is obtained based on comparison with other machine learning methods. As a result, depending on the conditions under study, the most efficient method is selected in the components. Before the system implementation phase, its reliability is checked by evaluating the predicted faults (in the system design phase). Therefore, this approach avoids the construction of a high-risk system. Compared to existing methods, the proposed approach is more comprehensive and has greater flexibility.

By expanding the dimensions of the problem, the model verification space grows exponentially using automata.

Unlike the existing methods that only examine one or two aspects of fault analysis such as fault detection, classification and fault-tolerance evaluation, this paper proposes a comprehensive process-oriented approach that investigates all three aspects of fault analysis concurrently.

Quantitative reliability analysis can effectively identify the time the driving system needs to be maintained. Then, the potential safety problems can be found, and some catastrophic failures can be effectively prevented. Therefore, this paper aims to evaluate the reliability of the switched reluctance generator (SRG) driving system.

In this paper, a method considering different thermal stresses and fault tolerance capacity is proposed to analyze the reliability of an SRG. A full-bridge power converter (FBPC) instead of the asymmetric half-bridge power converter (AHBPC) is adopted to drive the SRG system. First, the primary fault modes of the SRG system are introduced, and a fault criterion is proposed to determine whether the system fails. Second, the thermal circuit model of the converter is established to quickly and accurately obtain the junction temperature of the devices. At last, the Markov models of different levels are established to evaluate the reliability of the system.

The results show that the two-level Markov model is the most suitable when compared to the static model and the one-level Markov model.

The driving system of SRG will be more reliable after the reliability of the system is evaluated by the Markov model. At the same time, an FBPC is adopted to drive the SRG. The FBPCs have the advantages of fewer switching devices, higher integration and lower cost. The proposed driving strategy of the FBPC avoids the current reversal and the generation of dead zone time, which has the advantage of reliable operation. In addition, a precise thermal circuit model of the FBPC is proposed, and the junction temperature of each device can be obtained, respectively.

To provide an overview of self‐validating sensor technology for researchers and engineers which can help them understand the concept and recent developments of this research area.

The concept of self‐validating (SEVA) sensors, including definition, output parameters and requirement of SEVA sensors are introduced. The differences between SEVA sensors and traditional sensors are given from which we can see many advantages of SEVA sensors. The principium of SEVA sensors is presented by the functional architecture. The research development of SEVA sensors is introduced in two aspects: research development of sensor fault diagnosis and signal reconstruction and research development of SEVA sensor hardware.

Summarizes the methods for sensor fault diagnosis and signal reconstruction in the research of SEVA sensors, and the development steps of SEVA sensor hardware. Indicates the shortages and problems of current research and gives our research and ideas to solve these problems.

This paper provides a detailed description and research information of self‐validating sensor technology for those who want to know and research on this area.

There are high expectations for reliability, safety and fault tolerance are high in chemical plants. Control systems are capable of potential faults in the plant processing systems. This paper proposes is a new Fault Tolerant Control (FTC) system to identify the probable fault occurrences in the plant.

A Fault Diagnosis and Isolation (FDI) module has been devised based on the estimated state of system. An Unscented Kalman Filter (UKF) is the main innovation of the FDI module to identify the faults. A Multi-Sensor Data Fusion algorithm is utilized to integrate the UKF output data to enhance fault identification. The UKF employs an augmented state vector to estimate system states and faults simultaneously. A control mechanism is designed to compensate for the undesirable effects of the detected faults.

The performance of the Nonlinear Model Predictive Controller (NMPC) without any fault compensation is compared with the proposed FTC scheme under different fault scenarios. Analysis of the simulation results indicates that the FDI method is able to identify the faults accurately. The proposed FTC approach facilitates recovery of the closed loop performance after the faults have been isolated.

A significant contribution of the paper is the design of an FTC system by using UKF to estimate faults and enhance the accuracy of data. This is done by applying a data fusion algorithm and controlling the system by the NMPC after eliminating the effects of faults.

This paper describes the development of a fault‐tolerant database processor (DBP) system to replace OCLC's conventional file system, which not only improves overall system reliability and database availability, but also facilitates the operation and management of a large and rapidly growing online database. This database processor became operational on 16 October 1978, an achievement that represents a significant advance in the operation of information storage and retrieval systems.

Index by subjects, compiled by K.G.B. Bakewell covering the following journals: Facilities Volumes 8‐17; Journal of Property Investment & Finance Volumes 8‐17; Property Management Volumes 8‐17; Structural Survey Volumes 8‐17.

Compiled by K.G.B. Bakewell covering the following journals published by MCB University Press: Facilities Volumes 8‐17; Journal of Property Investment & Finance Volumes 8‐17; Property Management Volumes 8‐17; Structural Survey Volumes 8‐17.