Search results

Denim fabric has become a wardrobe staple due to its versatility to be worn in a variety of fashions. This paper aims to study denim fabrics to understand their unique hand by developing a hand evaluation system using computational method. Also, the effect of various washes was studied on the hand and surface morphology of denim fabrics.

Five different denim samples were manufactured with various washing treatments. The Kawabata Evaluation System was used to measure the low stress mechanical properties. Computation method was used to develop hand equations using multiple regression technique in the MS Excel software. The correlation coefficient analysis was done to determine the authenticity of the developed equations. Five primary hand attributes such as softness, smoothness, fullness, flexibility and stretchability were shortlisted by a panel of judges that influence the fabric handle.

The correlation coefficient between subjective and computational total hand values with thermal properties and without thermal properties was 0.88 and 0.85, respectively. The enzymatic wash fabric has the highest total hand value followed by the acid, bleach and stone-washed fabrics.

Although the hand evaluation system is available for conventional textiles like suiting and shirting fabrics, the method to predict fabric hand of non-conventional textiles such as denim fabrics remains an unexplored topic. The stresses acting on denim fabrics are completely different. Therefore, to the best of the author’s knowledge, a novel attempt has been made in this research work to develop a computational model to predict the total hand value of denim fabrics.

This study aims to present a sustainable approach in the natural dyeing of cellulose fabric followed by nanosilver finishing through a green crosslinker of citric acid for potential antibacterial surgical gown fabrication.

The nanosilver finish was reproduced using the chemical reduction method. The fabric dyeing was performed on a lab-scale dyeing machine, whereas silver nano-finishing through a pad-dry-cure approach. Citric acid was used as an eco-friendly crosslinker. The specimens were characterized for antibacterial activity, surface chemical, textile, color properties and finish release trend.

The results demonstrated the successful application of curcumin dye followed by silver nano-finishing. The resultant fabric exhibited appropriate textile, dyeing performance indicators, hydrophobic behavior and sustainable broad-spectrum antibacterial activity.

The prepared nanosilver-finished/curcumin-treated fabric expressed desirable properties for potential applications in the fabrication of surgical gowns.

The authors found no reports on an extensive examination of nanosilver finishing on the color parameters of curcumin-dyed cellulose fabric while retaining its textile and comfort properties for possible surgical gown fabrication.

Wearing clothes requires specifications for feeling comfortable, derived from the fibres, fabrics and finishing properties. This study aims to deal with the effect of economic blends containing hollow fibres, bamboo and cotton/polyester waste on the mechanical properties of the produced fabrics and the appropriate end use.

This research included two blends: one consisted of cotton/polyester wastes blended with bamboo and the other to which Chorisia fibres were added. Two weft counts 10,6/1 Ne were made from each blend, which were used to produce four fabric samples (S1 Chorisia-free and S2 with Chorisia); additionally, another two samples were dyed that contain Chorisia (S3) from each count. The six samples were tested by Kawabata Evaluation System (KES).

The samples gave a good total hand value (THV) for use as men's winter suits, where the thicker count 6/1, with and without Chorisia had better properties, also both counts 6, 10/1 with dye. The hollow fibres affected the fabrics’ properties, including thickness, shear, bending, thermal conductivity and weight. Both blends had a positive effect on THV.

Cotton/polyester waste, Chorisia and bamboo fibres were tested, and 2% Remazol Yellow GNL dye was used.

The ratio of blending, weft counts and dye affected the fabric’s properties, with consequences for the use of the Kawabata system and its applications.

The fabrics used in this research may be considered to be economical and have good THV.

The study proved the usefulness of fabrics made of two blends. The Chorisia component may be seen as a good alternative to cotton fibres to reduce the cost of producing high-consumption winter suit fabrics.

This study aims to synthesize new disperse dyes based on novel pyrazolyl quinolinone derivatives EQ1 and EQ2 and evaluate their characteristics after dyeing them on a polyester fabric.

New dispersed dyes based on pyrazolyl quinolinone derivatives were prepared and confirmed by different analyses, such as infrared spectroscopy, elemental microanalysis and nuclear magnetic resonance spectroscopy. They were dyed on a polyester fabric. The characteristics of dyed polyester were determined by color measurements such as a*, b*, L*, C*, E, Ho, R% and color strength. The electronic structures of EQ1 and EQ2 in gaseous state were investigated using density functional theory/B3LYP/6-311++G (d, p) level of theory.

The suitability of the prepared dyestuffs for dyeing on polyester fabrics has been investigated. The study was concerned with comparing the contrasting depth of shade and levelness. The study was concerned mainly with dye uptake and color measurements at two different temperatures. The results showed that the exhaustion values of dyes inside the polyester at 130°C were higher than those obtained at conventional dyeing temperature (100°C). The exhaustion values of EQ2 were greater than those of EQ1 at 130°C with 2.2%, while the brightness of EQ2 was higher than that of EQ1 at the two investigated temperatures. The results of molecular orbital calculations show that the studied compounds are planar. In addition, the ionization potential of EQ1 was lower than that of EQ2. The results of the theoretical study helped in understanding the dyeing behavior of the investigated azo dyes.

The prepared disperse dyes based on pyrazolyl quinolinone derivatives could be used in textile dyeing of polyester on an industrial scale.

This paper aims to develop an indigo-dyed denim fabric treated with a nanosilver colloid in the presence of a natural crosslinker of citric acid for possible surgical gown fabrication applications.

A bleached denim fabric was dyed with the sustainable indigo dye followed by silver nanofinishing through citric acid crosslinking under the pad-dry-cure method. The prepared denim samples were analyzed for chemo-physical, textile, dyeing, antibacterial and finish release properties.

The results demonstrated that the comfort and textile characteristics of nanosilver-treated/indigo-dyed cellulosic fabric were affected due to the crosslinking, surface amphiphilicity and air permeability. These properties were, still, in the acceptable range for the fabrication of naturally dyed and antibacterial nanofinished denim gowns.

The dyeing of denim with synthetic dyes may cause harmful effects on the skin and health of the wearer, and the authors present an eco-friendly sustainable approach.

The authors used the fabric substrate, natural indigo dye and reducing/crosslinker agent of citric acid, all being bio-based, in the fabrication of antibacterial dyed fabric for health care garments.

In the denim industry, enzyme washing and its combination with stone washing are generally used to get the desired worn-out look. However, these conventional methods include high water, energy and time consumption. Nowadays, laser fading, which is a computer-controlled, dry, ecological finishing method, is preferred in the denim fading process. The purpose of this study is to observe the effects of chemical pretreatment applications on laser-faded denim fabric in terms of color and mechanical properties. To eliminate the enzyme washing process in denim fading and to minimize the disadvantages of laser fading, such as decreased mechanical properties and increased fabric yellowness, various chemical pretreatment applications were applied to the denim fabric before laser fading, followed by simple rinsing instead of enzyme washing.

Two different indigo-dyed, organic cotton denim fabrics with different unit weights were exposed to pretreatment processes and then laser treatment, followed by simple rinsing. Polysilicic acid, boric acid, borax and bicarbonate were used for pretreatment processes, and laser treatment was carried out under optimized laser parameters (40 dpi resolution and 300 µs pixel time). Tensile strength was tested, and color values (CIE L*, a*, b*, ΔE*, C* and h), color yield (K/S), yellowness and whiteness indexes were measured to identify the color differences.

Before laser fading, 30 g/L and 40 g/L polysilicic acid pretreatments for sulfur-indigo-dyed fabric and a mixture of 10 g/L boric acid and 10 g/L borax pretreatments for the fabric only indigo-dyed were recommended for the laser fading with sufficient mechanical properties and good color values.

With the chemical pretreatments defined in this study, it was possible to reduce yellowness and maintain the mechanical properties after laser fading, thus minimizing the disadvantages of laser treatment and also eliminating enzyme washing.

The purpose of this study was to assess the repercussions of eucalyptus bark and tea leaf extract as natural dyes and antibacterial agents for jute–cotton union fabric.

The dye was collected from the eucalyptus tree’s bark and tea leaves by the aqueous extraction method. The fabric was dyed with potassium alum mordant, using pre-mordanting, post-mordanting and meta-mordanting methods. Examine the color performance analyzed the K/S, L*, a*, b*; fastness to washing using standard test method ISO 105 C06 A2S, rubbing fastness was performed by Crock meter using AATCC 115. The dyed fabrics were characterized by Fourier transform infrared radiation for the existence of various functional groups. Also, antimicrobial activity testing was done by the agar diffusion method (AATCC method SN 195 920) where Escherichia coli and Staphylococcus aureus were used.

The extracted dye tea leaves meta-mordant dyed samples were determined to have the strongest relative color. Fabrics pre-mordanted and post-mordanted with extracted eucalyptus and extracted tea dye produced the same outcome, which was excellent for wash fastness to staining and very good for wash fastness to fading. For both eucalyptus bark and tea, rubbing fastness on the pre-mordanted fabric produced very positive results. In mordanted colored fabric, significant antibacterial activity was discovered against S. aureus and E. coli.

This study demonstrates that the eucalyptus bark and tea leaves extract encompasses a solid antimicrobial action with amazing coloring execution for jute–cotton union fabric.

This study aims to embed anatase, rutile and brookite TiO₂ nanoparticles (NPs) with different crystal phases into cotton fabrics by epoxy silane and to examine the effect of these applications on the photocatalytic and mechanical properties of the fabric.

Different aqueous dispersions which contain anatase, rutile and brookite were prepared at three different concentrations (5%, 10% and 15%). These NPs were embedded in cotton fabrics by using GPTS [(3-glycidyloxypropyl) trimethoxysilane]. Characterization tests were performed by scanning electron microscopy (SEM), Raman and Fourier-transform infrared spectroscopy (FT/IR). Samples were stained with methylene blue (MB) and then exposed to solar light for different periods. Color changes of the samples were examined with a spectrophotometer. Air permeability, abrasion and tear strength tests were applied to all samples.

According to SEM images, the NPs were successfully attached to the cotton fabrics, and epoxy silane coating surrounded the fiber surfaces. The presence of the coating was also confirmed by Raman spectroscopy and FT/IR. The treatments reduced the stainability of the samples. The most effective applications for ensuring photocatalytic activity in cotton fabrics were suspensions as 10% brookite, 10% anatase and 5% anatase, in descending order. The applied coating slightly reduced the samples’ air permeability, and wear and tear strength.

The importance of this study is to determine the optimal crystal phase and its concentration by using epoxy silane to ensure self-cleaning properties on cotton fabrics. The sample treated with 10% brookite is the most approached its original white color by 99.65% as a result of degradation of MB (after 120 min). On the other hand, using the pure rutile with epoxy silane was not suitable for removing MB from the fabric.

The health and environmental hazards associated with synthetic dyes have led to a revival of natural dyes that are non-toxic, environmentally benign and coupled with various functions. The study aims to investigate and develop the potentiality of a popular herb called Chromolaena odorata (C. odorata) as a sustainable and stable dyestuff in textiles.

Natural colorant extracted from C. odorata leaves is used to dye the worsted fabric, which is one of the premier end-use of wool in fashion, via the padding method associated with pre-, simultaneous and post-mordanting with chitosan, tannic acid and copper sulfate pentahydrate. The effects of extraction, dyeing and mordanting processes on fabric’s color strength K/S and color difference ΔE_CMC are investigated via International Commission on Illumination’s L*a*b* color space, Fourier transform infrared spectroscopy, scanning electron microscope, color fastness to washing, rubbing, perspiration and light.

The results obtained indicate extraction with ethanol 90% with a solid/liquid ratio of 1:5 within 1 h, and coloration with a liquor ratio of 1:5 (pH 5) within 2 h under padding pressure of 0.3 MPa are the most effective for coloring worsted fabric.

The C. odorata’s application as a highly effective dyestuff possessing good colorimetric effectiveness has expanded this herb's economic potential, contributing partly to economic growth and adding value to wool in global supply chain.

C. odorata dyestuff has prevailed over other natural colorants because of its impressive color fastness against washing, rubbing, perspiration and especially color stability for pH change.

Face masks are the most recommended precautionary measure since the emergence of SARS-CoV-2 since 2020 and the most useful PPE against this virus and its variants so far. This study aims to develop reusable and biodegradable mask from 100% regenerated bamboo or/and its blend. Selection of natural and regenerated textile materials is to minimize generation of solid waste. This attempt will eventually protect our earth by minimizing or better discontinuing the production of the disposable nonbiodegradable face masks available worldwide.

Hundred percent regenerated bamboo and 50:50 bamboo:cotton were selected to knit plain and interlock fabrics for manufacturing of reusable sustainable face masks. A 2³ 3²-mixed-level factorial design was applied to study the effect of liquor ratio and temperatures, fabric structure, blend ratios and finishes at three different levels. Model 2³ 3² has two factors (liquor ratio and temperatures) at three levels and three factors (fabric structure, blend ratios and type of finish) at two levels. Knitted fabrics were then applied with antibacterial finishes; sanitized T99-19 and sanitized T27-22, separately at three different liquor ratios (1:10, 1:12 and 1:15) and temperatures (45, 55 and 65 °C) via exhaust method. After completing processing, fabric thickness, pilling resistance, dimensional stability, bursting strength, Berger whiteness index, air permeability and antibacterial properties of each trial were evaluated using standard test procedures.

Selected fabrics treated either by sanitized T27 or sanitized T99 in a liquor ratio of 1:15 against 65 °C, showed excellent bacteriostatic/bactericidal activity. However, 100% regenerated bamboo interlock knitted fabric treated with sanitized T99 in a liquor ratio of 1:15 at 65 °C has the most desired values of dimensional stability, pilling resistance, Berger whiteness, fabric thickness, air permeability and bursting strength which made it the best for the manufacturing of the masks. Reusable mask is comprised of three layers in which the first and the third layers were of selected 100% regenerated bamboo fabric while a PM2.5 filter was inserted in between. Bacterial filtration efficiency, particle filtration efficiency, biocompatibility and microbial cleanliness will be evaluated in future, to compare the performance of proposed reusable and biodegradable face mask with N95 masks and other fabric masks available commercially.

This study resulted in a development of reusable eco-friendly facemask which was not attempted by the preceding investigations. Outcomes of this work pave the way for a greener and safer earth by using easily obtainable regenerated bamboo fabrics, antibacterial finishes and knitted structures.