Search results

In this paper, the complex flow evaporation process of droplet impact on the liquid film in a horizontal falling film evaporator is numerically studied based on smoothed particle hydrodynamics (SPH) method. The purpose of this paper is to present the mechanism of the water treatment problem of the falling film evaporation for the high salinity mine water in Xinjiang region of China.

To effectively characterize the phase transition problem, the particle splitting and merging techniques are introduced. And the particle absorbing layer is proposed to improve the nonphysical aggregation phenomenon caused by the continuous splitting of gas phase particles. The multiresolution model and the artificial viscosity are adopted.

The SPH model is validated qualitatively with experiment results and then applied to the evaporation of the droplet impact on the liquid film. It is shown that the larger single droplet initial velocity and the smaller single droplet initial temperature difference between the droplet and liquid film improve the liquid film evaporation. The heat transfer effect of a single droplet is preferable to that of multiple droplets.

A multiphase SPH model for evaporation after the droplet impact on the liquid film is developed and validated. The effects of different factors on liquid film evaporation, including single droplet initial velocity, single droplet initial temperature and multiple droplets are investigated.

The present work is to investigate nucleate boiling heat transfer at high heat fluxes, which is characterized by the existence of macrolayer. Two‐region equations are proposed to simulate both thermo‐capillary driven flow in the liquid layer and heat conduction in the solid wall. The numerical simulation results can clearly describe the activities of several multi vorticies in the macrolayer. These vorticies and evaporation at the vapor‐liquid interface constitute a very efficient heat transfer mechanism to explain the high heat transfer coefficient of nucleate boiling heat transfer near CHF. This study also explores the flow pattern of macrolayer with a high conducting solid wall, e.g. copper, and hence the temperature is uniform at the liquid‐solid interface, and the heat fluxes and the evaporation coefficient are found to have significant effect on flow pattern in the liquid layer. Furthermore, a parameter “evaporation fraction” as well as “aspect ratio” is proposed as an index to investigate the thermo‐capillary driven flow system. The model prediction agrees reasonably well with the experimental data in the literature.

The water evaporation rate (WER) is not only crucial for fabric drying, but also an important parameter affecting cooling from a body wearing sweat wetted clothing. The purpose of this paper is to predict the WERs of wet textile materials in a pre-defined environment.

The maximum water evaporation rate (WER_max) from a saturated surface in a pre-defined environment was first predicted based on the Lewis relationship between the evaporative and the convective heat transfer in this paper. The prediction results were validated by the comparisons with experimental measurements in various environments obtained in this paper and reported in the literature.

Experiment results show that the ratios of WERs to WER_max are lower than 100 percent but higher than 50 percent, which confirmed that the prediction of WER_max is reliable. The temperature decrease of the wet material surface due to evaporation was considered to account for the difference between measured WERs and the WERmax, and the WER variation among materials. The lower ratios of WERs to WER_max in the higher wind condition were speculated to be due to the greater temperature decrease caused by the increased evaporation.

It provides a reliable way to obtain both WER_max and WER (WER_max multiplied by a proper ratio), which can be useful in clothing physiological modeling to predict clothing comfort.

This study contributes to the understanding of the evaporation process of textile materials.

This paper aims to introduce a two-dimensional smoothed particle hydrodynamics (SPH) framework for simulating the evaporation and combustion process of fuel droplets.

To solve the gas–liquid two-phase flow problem, a multiphase SPH method capable of handling high density-ratio problems is established. Based on the Fourier heat conduction equation and Fick’s law of diffusion, the SPH discrete equations are derived. To effectively characterize the phase transition problem, inspired by volume of fluid method, the concept of liquid phase mass fraction of the SPH particles is proposed. The one-step global reaction model of n-hexane is used for the vapor combustion.

The evaporation and combustion process of single droplet conforms to the law. The framework works out well when the evaporation of multiple droplets involves coalescence process. Three different kinds of flames are observed in succession in the combustion process of a single droplet at different inflow velocity, which agree well with the results of the experiment.

To the best of the authors’ knowledge, this is the first computational framework that has the capability to simulate evaporation and combustion with SPH method. Based on the particle nature of SPH method, the framework has natural advantages in interface tracking.

In most ball bearings, grease functions primarily as a storehouse for the small amount of oil needed to coat ball, raceway and separator surfaces. Bearing life tests indicate that as a grease ages in service, it finally dries to a degree where it fails to provide this lubrication demand when about half the original oil is gone. This condition of dryness which leads to failure is also related to operating factors such as bearing temperature, speed and load.

This paper aims to carry out numerical study on growth of a single bubble from a curved hydrophilic surface, in nucleate pool boiling (NPB). The boiling performance associated with NPB on a curved surface has been analyzed in contrast to a plane surface.

Commercial software ANSYS Fluent 2021 R1 has been used with its built-in feature of interface tracking based on volume of fluid method. For water as the working fluid, the effect of microlayer evaporation underneath the bubble base has been included with the help of user-defined function. The phase change behavior at the interface of vapor bubble has been modeled by using “saturated-interface-volume” phase change model.

An interesting outcome of the present study is that the bubble departure gets delayed with increase in curvature of the heating surface. Wall heat flux is found to be higher for a curved surface as compared to a plane surface. Effect of wettability on the time for bubble growth is relatively more for the curved surface as compared to that for a plane surface.

Effect of surface curvature has been investigated on bubble dynamics and also on temporal variation of heat flux. In addition, the impact of surface wettability along with the surface curvature has also been analyzed on bubble morphology and spatial variation of heat flux. Furthermore, the influence of wall superheat on the bubble growth and also the wall heat flux has been studied for fixed angle of contact and varying curvature.

The present study aims to investigate the inverse-thermocapillary effect in an evaporating thin liquid film of self-rewetting fluid, which is a dilute aqueous solution (DAS) of long-chain alcohol.

A long-wave evolution model modified for self-rewetting fluids is used to study the inverse thermocapillary characteristics of an evaporating thin liquid film. The flow attributed to the inverse thermocapillary action is manifested through the streamline plots and the evaporative heat transfer characteristics are quantified and analyzed.

The thermocapillary flow induced by the negative surface tension gradient drives the liquid from a low-surface-tension (high temperature) region to a high-surface-tension (low temperature) region, retarding the liquid circulation and the evaporation strength. The positive surface tension gradients of self-rewetting fluids induce inverse-thermocapillary flow. The results of different working fluids, namely, water, heptanol and DAS of heptanol, are examined and compared. The thermocapillary characteristic of a working fluid is significantly affected by the sign of the surface tension gradient and the inverse effect is profound at a high excess temperature. The inverse thermocapillary effect significantly enhances evaporation rates.

The current investigation on the inverse thermocapillary effect in a self-rewetting evaporating thin film liquid has not been attempted previously. This study provides insights on the hydrodynamic and thermal characteristics of thermocapillary evaporation of self-rewetting liquid, which give rise to significant thermal enhancement of the microscale phase-change heat transfer devices.

Salt weathering is one of the most common agents of decay of Central Asian earthen sites and is in function of water evaporation from the wall surface. Soon after excavation the earthen walls and the stupa of the Buddhist temple of Ajina Tepa (seventh-eighth century AD) started to deteriorate due lack of protection and surface erosion. The most important issue in the planning of conservation work was to understand such mechanisms and to decrease the effect of salt weathering on structural damage. The purpose of this paper is to discuss these issues.

Evaporation distribution and salts types were studied on selected walls. In addition, three-dimensional recording of the walls and the stupa was undertaken with digital photogrammetric methods.

It was clearly found that the intensity of salt weathering in the site is high and some salts such as halite (sodium chloride) are thought to originate from groundwater. On the basis of the results obtained, thick shelter coating with mud brick and mud render was designed and constructed as protective measure for the earthen walls.

Those walls that were most affected by salts weathering and erosion at the base (coving) became structurally less sound and eventually collapsed if not conserved.

The work is the first attempt in the design of a methodology for the selection of earthen repair materials and methods.

A computational model is developed to describe convection in volatile liquids evaporating in capillary tubes. Experimental work has demonstrated the existence of such convective structures. The correlation between this convection and the phase change process has been experimentally established. Temperature distribution on the liquid‐vapour interface is considered in order to characterise the minimum of radial temperature gradient required to initiate and orientate Marangoni convection. Direct numerical simulation using finite volume approximation is used to investigate the heat and mass transfer in the liquid phase. The case of a capillary tube filled with a volatile liquid is investigated for various Marangoni numbers, to characterise heat and mass transfers under conditions close to realistic operating parameters. The simulation shows that a minimum irregularity in evaporative flux along the liquid‐vapour interface is necessary to trigger thermocapillary convection. The enhancement of heat and mass transfer by Marangoni convection is also investigated.

The main objective of this paper is the assessment of the environmental impact due to accidental spills of toxic and flammable liquids on land. Different case studies of possible accidents in the State of Qatar were considered. An EPA‐based dispersion model was utilized to estimate the size and location of the dangerous clouds generated by such spills at different elapsed times. Three case studies of possible accidents in the State of Qatar involving gasoline were considered. Due to the transient nature of the dispersion processes in the case studies, the results showed clearly the phenomenon of growth and decay of the generated dangerous clouds. An interface between the dynamic results of the dispersion software and the static data of the Qatar geographical information system (GIS) allowed the immediate identification of the major landmarks affected by the considered accidents. These data would be of great help in developing an emergency evacuation plan for such accidents.