Search results

The purpose of this paper is to study thickness dependent variation in microwave properties of the Mg_xMn_(0.9−x)Al_0.1Zn_0.8Fe_1.2O₄ (x=0.8, 0.9) thick films and enhancement of power efficiency of Ag thick film EMC patch antenna.

X‐band microwave properties of the Mg_xMn_(0.9−x)Al_0.1Zn_0.8Fe_1.2O₄ (x=0.8, 0.9) thick films were measured by superstrate technique using Ag thick film EMC patch antenna as the resonant element. The complex permittivity and permeability of these thick films were also measured by this technique. The microwave response of the EMC patch, complex permeability and permittivity of Mg_0.8Mn_0.1Al_0.1Zn_0.8Fe_1.2O₄ and Mg_0.9Al_0.1Zn_0.8Fe_1.2O₄ thick films and their thickness dependency were investigated.

The XRD patterns reveal the cubic spinel crystal system was obtained for both compositions. The crystallite size obtained was 134.68 nm for Mg_0.8Mn_0.1Al_0.1Zn_0.8Fe_1.2O₄ and 155.99 nm for Mg_0.9Al_0.1Zn_0.8Fe_1.2O₄ The superstrate technique has been used successfully to evaluate the complex permittivity and permeability of the ferrite thick films in the X band. The EMC patch also show thickness and composition dependent frequency agility and enhancement of power efficiency.

The complex permeability of Mg_xMn_(0.9−x)Al_0.1Zn_0.8Fe_1.2O₄ (x=0.8, 0.9) thick films measured by superstrate technique is reported in this paper. The superstrate of Mg_xMn_(0.9−x)Al_0.1Zn_0.8Fe_1.2O₄ (x=0.8, 0.9) thick films makes the Ag thick film EMC patch antenna frequency agile and power amplification is obtained.

The purpose of this paper is to study properties of magnesium oxide and mixed magnesium oxide‐bismuth oxide thick films for application in tuned devices.

The effect of magnesium oxide and mixed magnesium oxide‐bismuth oxide thick films overlay of different thickness on Ag thick film microstrip rectangular patch antenna was investigated in the X band (8‐12 GHz). Using Ag thick film microstrip rectangular patch antenna the thick and mixed thick films was characterized by microwave properties such as resonance frequency, amplitude, bandwidth, quality factor and input impedance. Using the resonance frequency the permittivity of magnesium oxide and mixed magnesium oxide‐bismuth oxide thick films was measured.

Cubic structure of single magnesium oxide and monoclinic structure of bismuth oxide was present in mixed thick film. Also the morphology of single thick films was maintained in mixed thick film of magnesium oxide‐bismuth oxide. Due to overlay magnesium oxide and magnesium oxide‐bismuth oxide mixed thick films, change in resonance frequency shifts towards high frequency end was observed. Dielectric constant of magnesium oxide and mixed magnesium oxide‐bismuth oxide thick film calculated from resonance frequency decreased with increase in thickness.

The microwave properties using Ag thick film microstrip patch antenna due to overlay of magnesium oxide and mixed magnesium oxide‐bismuth oxide thick films have been reported for the first time. Thickness of overlay dependent tuning of the antenna has been achieved.

A class of robust and efficient beamforming methods is developed in this paper for the optimised design of realistic microstrip antennas on arbitrarily curved substrates. More specifically, this paper aims to focus on the formulation of an effective and computationally light beamforming algorithm and its implementation on a novel realistic cylindrical-substrate microstrip array antenna with significantly decreased size, wideband operation and enhanced radiation characteristics.

The proposed multi-parametric schemes introduce an efficient null-steering concept, which drastically annihilates the undesired beamformer waveform artefacts, while retaining the real output signal undistorted. In particular, the key objective is the accurate calculation of the appropriate complex feeding weights, required to set nulls along the propagation directions of the unwanted signals and a maximum towards the propagation direction of the desired incoming signal. The featured technique, combined with a modified finite element method, is applied to the design of a new family of cylindrical-substrate microstrip array antennas.

Numerical results, mainly concerning customisable three-dimensional radiation patterns and attributes, certify the merits of the algorithm and its limited system demands. The introduced beamforming algorithms are applied to a variety of different inputs (desired radiation patterns), which indicate that the designed cylindrical-substrate antenna overwhelms existing designs in terms of computational cost for the beamforming algorithm, while retaining acceptable values for radiation characteristics, such as gain, directivity and side-lobe suppression. In this manner, the effectiveness of the prior methodology and the benefits of this newly shaped array antenna are comprehensively revealed and substantiated.

Rigorous beamforming techniques in conjunction with a class of contemporary array antennas are developed for potential use in high-end communication systems, such as 5G configurations. The proposed cylindrical-shaped structures are systematically designed, with an emphasis on space efficiency and wideband radiation effectiveness to offer fully adjustable setups. To this aim, the cylindrical-substrate microstrip antenna, because of its inherent azimuthal symmetry and confined overall dimensions, provides reliable operation and promising performance.

The purpose of this paper is to present an optimization process for the design of a 2×2 patch antenna phased array with application for an UHF RFID system.

The optimization process is based on a method of moment (MoM)-solver, which was individually made to create such patch antenna phased arrays and simulate the radiated field pattern. In combination with this MoM-solver, a GUI, which gives the opportunity to change every physical antenna factor and create the antenna structure within a few minutes is presented. Furthermore the golden section search method is used to produce an even better solution in a more efficient way compared to the first attempt. After the simulation, different types of presentation of results can be chosen for a fast and easy optimization.

The design process is discussed while the authors try to optimize the distance between the elements and the difference of input phase for each patch element. The final goal is to create an antenna with maximum directivity and coverage of field pattern.

A physical implementation of an optimized patch antenna phased array and the results of measurement are presented in the end.

An optimization process for the design of a 2×2 patch antenna phased array with application for an UHF RFID system is presented. Furthermore the golden section search method is combined with the design process to increase the accuracy of the solution and decrease the time effort.

Compact and wideband antennas are the need of modern wireless systems that preferably work with compact, low-profile and easy-to-install devices that provide a wider coverage of operating frequencies. The purpose of this paper is to propose a novel compact and ultrawideband (UWB) microstrip patch antenna intended for high frequency wireless applications.

A square microstrip patch antenna was initially modeled on finite element method-based electromagnetic simulation tool high frequency structure simulator. It was then loaded with a rectangular slit and Koch snowflake-shaped fractal notches for bandwidth enhancement. The fabricated prototype was tested by using vector network analyzer from Agilent Technologies, N5247A, Santa Clara, California, United States (US).

The designed Koch fractal patch antenna is highly compact with dimensions of 10 × 10 mm only and possesses UWB characteristics with multiple resonances in the operating band. The −10 dB measured impedance bandwidth was observed to be approximately 13.65 GHz in the frequency range (23.20–36.85 GHz).

Owing to its simple and compact structure, positive and substantial gain values, high radiation efficiency and stable radiation patterns throughout the frequency band of interest, the proposed antenna is a suitable candidate for high frequency wireless applications in the K (18–27 GHz) and Ka (26.5–40 GHz) microwave bands.

The paper seeks to investigate the precise time‐domain modelling and broadband performance optimisation of 3D EMC structures formed by composite left‐handed metamaterials.

A frequency‐dependent alternating‐direction implicit finite‐difference time‐domain method is introduced. Developing a class of multi‐directional curvilinear schemes for double‐negative media, the unconditionally stable algorithm forms robust lattice tessellations and provides advanced models complicated media interfaces. Moreover, the erroneous refractions at the metamaterial boundaries are systematically analysed through dynamic stencil configurations and powerful perfectly matched layer absorbers.

The paper finds that the proposed technique leads to convergent discretisations that resolve all propagation bandwidths and enhances the design of promising periodical devices loaded by substrates of thin wires and split‐ring resonators. Furthermore, its versatile character subdues dispersion deficiencies far beyond the usual stability criteria. Numerical validation, addressing various up‐to‐date EMC devices like coupled antennas, waveguides, high‐pass filters and absorber linings in test facilities, confirms the merits of the algorithm.

The novel methodology offers an advanced nodal control process which drastically suppresses the serious dispersion errors of existing approaches as time‐step exceeds the Courant limit. The resulting grids can support coarse resolutions, while the general curvilinear framework, along with the ADI rationale, allows the accurate approximation of demanding permittivity and permeability constitutive profiles. Hence, high accuracy and confined computational overhead are achieved without the need of laborious assumptions.

This paper describes a computer program DOTIG4, for the study in the time domain, of the interaction of transient electromagnetic pulses (EMP) with arbitrary perfect conducting (PEC) surfaces modelled by planar triangular patches. DOTIG4 is based on the solution of the Time Domain Electric Field Integral Equation (TD‐EFIE) by the method of moments (MoM) using a marching‐on‐in‐time procedure. The code is applied to transient scattering of several structures and to calculate the input impedance of several broadband antennas.

This purpose of this study is to present a novel four-element array antenna in combination with a modified Wilkinson power divider feeding network.

The two covering bands of this planar array antenna are achieved by an Elephant trunk shape (ETS) radiating element; therefore, two frequency bands for Bluetooth (2.4 GHz) and the wireless local area network (WLAN) band (5.15-5.825 GHz) are obtained.

An improved design of the power divider with curved corners rather than the sharp edges and certain new modifications in the length of matching stubs are implemented.

This paper describes an improved four-way Wilkinson power divider with excellent loss of insertion and adequate return loss for all ports and good isolation performance within two frequency bands (2.4 and 5.5 GHz) and when loaded with array components; the modified power divider complies with the design requirements. To comprehend its behavior, numerical and experimental results are provided. The simulated and measured results indicate a proper bandwidth coverage of the suggested antenna, stable radiation patterns and high gain.

The purpose of this paper was to determine the complex permittivity of bismuth strontium manganites (Bi_1−xSr_xMnO₃) in the 8‐12 GHz range by using perturbation of Ag thick film microstrip ring resonator (MSRR) due to superstrate of both bulk and thick film.

The BSM ceramics were synthesized by simple low cost solid state reaction method and their fritless thick films were fabricated by screen printing technique on alumina substrate. A comparison has been made between the X band response of Ag thick film microstrip ring resonator due to perturbation of bulk and thick film Bi_1−xSr_xMnO₃ ceramic.

The bulk and thick film superstrate decreases the resonance frequency of MSRR. In this technique even minor change in the properties of superstrate material changes the MSRR response. Variation of strontium content also influences microwave conductivity and penetration depth of bulk and thick films.

The microwave complex permittivity decreases with increase in Sr content in bismuth manganite and it is higher for bulk as compared to its thick films. The superstrate on Ag thick film microstrip ring resonator is an efficient tool capable of detecting the composition dependent changes in microwave properties of ceramic bulk and thick films.

Utilization of electromagnetic wave (EMW) sensors in an underwater environment has the potential to increase the data rate compared to acoustic-based sensors because of the ability to use larger signal bandwidth. Nevertheless, EMW signals has the drawback of large signal attenuation in underwater, attributed to the high relative permittivity and conductivity of water compared to the atmosphere, hence employment of wide signal bandwidth is necessary to balance the data rate-attenuation trade-off. The purpose of this paper is to analyze the characteristics of both narrowband and wideband EMW signal propagation underwater and devise a path loss model for both cases.

Path loss measurement was conducted using a point-to-point configuration in a laboratory water tank while transmitting narrowband and wideband signals between a pair of wideband underwater antennas. The wideband underwater antennas use buffer-layer structures as the impedance matching layer to optimize the antenna performance when operating underwater. The path loss for narrowband signal was modeled using a multi-layer propagation equation in lossy medium considering losses at the medium boundaries. For the case of the wideband signal, a modified version of the model introducing power integration over bandwidth is adopted. These models were formulated through numerical simulations and verified by measurements.

The measured narrowband path loss marked an 80 dB attenuation using 800 MHz at 2 m distance. The proposed narrowband model agrees well with the measurements, with approximately 3 dB modeling error. Utilization of the proposed wideband path loss model resulted in a reduction of the gradient of the path loss curve compared to the case of the narrowband signal. The measured wideband path loss at 2 m distance underwater was approximately −65 dB, which has been shown to enable a working signal-to-noise ratio of 15 dB. This proves the potential of realizing high data rate transmission using the wideband signal.

The paper proposed a wideband propagation model for an underwater EMW sensor network, using power integration over bandwidth. The effectiveness of using wideband EMW signals in reducing path loss is highlighted, which is seldom discussed in the literature. This result will be of useful reference for using wideband signals in designing a high data rate transmission system in underwater wireless sensor networks, for example, in link budget, performance estimation and parameter design of suitable transmission scheme.