Search results

This paper aims to present an inverter with a current-source input for 400 Hz avionic systems to have a system which removes DC-link capacitors and presents a high efficiency.

A battery-powered DC link inductor generates a constant-current source. A single high-frequency switch is used to provide a sinusoidally modulated current before the inverter. The output of the switch is “unfolded” by a thyristor-based H-bridge inverter to generate an AC output current. The system uses a CL low-pass filter to obtain a 400 Hz pure sine wave by removing pulse width modulation components.

Simulations and Typhoon HIL real-time experiments were performed with closed-loop control to validate the proposed inverter concept while meeting the critical standards of MIL-STD-704F.

This current source inverter topology is suitable for avionic systems that require 400 Hz output frequency. The topology uses small DC-link inductor and eliminates bulky capacitor which determines the inverter lifetime.

The purpose of this paper is to investigate the impact of different distribution of shoot through mode on Z‐source inverter efficiency and particularly on complexity of switching pattern generation. Switching pattern generation has been optimized for field‐oriented control (FOC) of induction motor operating beyond its nominal speed which can be easily accomplished due to the input voltage boosting implemented inherently by Z‐source inverter. The proposed drive is unaffected to supply voltage sags, too.

The space vector modulation switching pattern of the traditional FOC drive was modified in order to insert shoot through mode necessary for input voltage boosting. Since this can be accomplished only on account of zero mode of the inverter, the active modes have to be reduced. Consequently, the output voltage space vector has to be reduced, as well.

In order to maximize profit of the input DC voltage and to omit the output voltage distortion, mathematical limitations have been derived giving the optimal boost ratio for required output voltage and ride‐through capability during voltage sags.

The experimental tests of upgraded FOC of induction motor with the proposed distribution of shoot through mode in the switching pattern of Z‐source inverter and optimized control of inverter voltage are demonstrated. It is also shown that such a drive can withstand a long period of input voltage sags and operate in a broader field weakening regime.

The paper's value lies in the overall, DSP‐based control of the induction motor supplied with Z‐source inverter gaining the maximum utilization of the input DC supply source and optimum trade‐off between inverter efficiency and inverter components voltage stress.

The aim of the research was to find a structure of the power electronics controlled current source with extended pass band, which would better match a source output current within an input (reference) signal. Also, pulse modulation components in output current of current source should be minimized.

The power electronics controlled current source utilizes both, the concept of the inductor with variable (controlled) inductance located at the output of an inverter and the concept of the multi‐channel (interleaved) inverter. The small signal (linear) and simulation models of an active filter have been investigated.

The work presents the concept of 1‐phase active shunt filter with utilization of the power electronics current source about extended pass‐band.

The research should be continued to achieve stability of the electrical system with variable parameters of the power network and receiver.

The research will be continued towards realization of a laboratory model of a 3‐phase active shunt filter with the DSP based control module.

Social implications are difficult to determine.

The paper presents a new concept of the precision power electronics controlled current source with the extended pass‐band. The controlled current source is the fundamental block of a power electronics active shunt filter.

Traditional level inverter technology has drawbacks in the aspect of Total harmonic distortion (THD) and switching losses for higher frequencies. Due to these drawbacks, two-level inverters have become unprofitable for high-power applications. Multilevel inverters (MLIs) are used to enhance the output waveform characteristics (i.e. low THD) and to offer various inverter topologies and switching methods.

MLIs are upgraded versions of two-level inverters that offer more output levels in current and voltage waveforms while lowering the dv/dt and di/dt ratios. This paper aims to review and compare the different topologies of MLI used in high-power applications. Single and multisource MLI's working principal and switching states for each topology are demonstrated and compared. A Simulink model system integrated using detailed circuit simulations in developed in MATLAB®–Simulink program. In this system, a constant voltage source connected to MLI to feed asynchronous motor with squirrel cage rotor type is used to demonstrate the efficacy of the MLI under different varying speed and torque conditions.

MLI has presented better control and good range of system parameters than two-level inverter. It is suggested that the MLIs like cascade-five-level and NPC-five-level have shown low current harmonics of around 0.43% and 1.87%, respectively, compared to two-level inverter showing 5.82%.

This study is the first of its kind comparing the different topologies of single and multisource MLIs. This study suggests that the MLIs are more suitable for high-power applications.

The purpose of this paper is to present the Switched Inductor Z-Source Inverter (SLZSI) topology for three-phase on-line uninterruptible power supply (UPS) by employing third harmonic injected maximum constant boost pulse width modulation (PWM) control. Conventional UPS consists of step-up transformer or boost chopper along with voltage source inverter (VSI) which reduces the efficiency and increases energy conversion cost. The proposed three-phase UPS by using SLZSI has the voltage boost capability through shoot through zero state which is not available in traditional VSI and current source inverter.

Performance of three-phase on-line UPS based on ZLZSI by using third harmonic injected maximum constant boost PWM control is analyzed and evaluated in MATLAB/Simulink software and the results are compared with Z-source inverter (ZSI) fed UPS. Experimental results are presented for the validation of the simulation and theoretical analysis.

The output voltages, currents, THD values, voltage stress and efficiencies for different loading condition are determined and compared with the theoretical values and UPS with ZSI. The experimental results validate the theoretical and simulation results.

Compared with the traditional ZSI, the SLZSI provides high-voltage boost inversion ability with a very short shoot through zero state. This proposed UPS by using SLZSI increases the efficiency with less number of components, reduces the harmonics, increases the voltage gain and reduces the voltage stress.

The active power filter with two-level inverter needs a high-rating coupling transformer for high-power applications. This complicates the control and system becomes bulky and expensive. The purpose of this paper is to motivate the use of multilevel inverter as harmonic filter, which eliminates the coupling transformer and allows direct control of the power circuit. The advancement in artificial intelligence (AI) for computation is explored for controller design.

The proposed scheme has a five-level cascaded H-bridge multilevel inverter (CHBMLI) as a harmonic filter. The control scheme includes one neural network controller and two fuzzy logic-based controllers for harmonic extraction, dc capacitor voltage balancing, and compensating current adjustment, respectively. The topology is modeled in MATLAB/SIMULINK and implemented using dSPACE DS1103 interface for experimentation.

The exhaustive simulation and experimental results demonstrate the robustness and effectiveness of the proposed topology and controllers for harmonic minimization for RL/RC load and change in load. The comparison between traditional PI controller and proposed AI-based controller is presented. It indicates that the AI-based controller is fast, dynamic, and adaptive to accommodate the changes in load. The total harmonic distortion obtained by applying AI-based controllers are well within the IEEE519 std. limits.

The simulation of high-power, medium-voltage system is presented and a downscaled prototype is designed and developed for implementation. The laboratory module of CHBMLI-based harmonic filter and AI-based controllers modeled in SIMULINK is executed using dSPACE DS1103 interface through real time workshop.

The purpose of this paper is to design a cascaded Multilevel inverter with reduce number of switches for high power applications. This paper came up with an innovative three-phase multilevel inverter (MLI) topology, which is a cascaded structure based on classical three-legged voltage source inverter (VSI) bridges as an individual module. The prominent advantage of this topology is that it requires only one direct current (DC) link system. The main characteristic of it is that a higher number of voltage levels can be achieved with considerably a smaller number of semiconductor switches, which improves the reliability, power quality, cost and size of the system significantly.

The individual modules are cascaded through three-phase transformers to provide higher voltage at the output with the higher number of voltage levels. In this work, the phase-shifted pulse width modulation technique is implemented to verify the result.

The proposed topology is compared with three-phase cascaded H-bridge MLI (CHB-MLI) and a modified CHB-MLI topology and found better in many aspects. The proposed MLI can produce a higher number of voltage levels with fewer semiconductor switches and associated triggering circuitry. As the device count in the proposed MLI is less compared to other MLI discussed, it tends to have less switching and conduction loss which increases the efficiency and reliability. As the number of level increases, the voltage profile and the total harmonic distortion of the proposed MLI improves.

This is a transformer-based modular cascaded MLI, which is based on classical VSI bridges. Here in this topology, a single module provides all three phases. So, a single string of cascaded modules is enough for three-phase multilevel voltage generation.

Voltage source inverter-fed permanent magnet synchronous motors (VSI-PMSMs) are widely used in industrial actuation and mechatronic systems in water pumping stations, as well as in the traction of transportation systems (such as electric vehicles and electric trains or ships with electric propulsion). The dynamic model of VSI-PMSMs is multivariable and exhibits complicated nonlinear dynamics. The inverters’ currents, which are generated through a pulsewidth modulation process, are used to control the stator currents of the PMSM, which in turn control the rotational speed of this electric machine. So far, several nonlinear control schemes for VSI-PMSMs have been developed, having as primary objectives the precise tracking of setpoints by the system’s state variables and robustness to parametric changes or external perturbations. However, little has been done for the solution of the associated nonlinear optimal control problem. The purpose of this study/paper is to provide a novel nonlinear optimal control method for VSI-fed three-phase PMSMs.

The present article proposes a nonlinear optimal control approach for VSI-PMSMs. The nonlinear dynamic model of VSI-PMSMs undergoes approximate linearization around a temporary operating point, which is recomputed at each iteration of the control method. This temporary operating point is defined by the present value of the voltage source inverter-fed PMSM state vector and by the last sampled value of the motor’s control input vector. The linearization relies on Taylor series expansion and the calculation of the system’s Jacobian matrices. For the approximately linearized model of the voltage source inverter-fed PMSM, an H-infinity feedback controller is designed. For the computation of the controller’s feedback gains, an algebraic Riccati equation is iteratively solved at each time-step of the control method. The global asymptotic stability properties of the control method are proven through Lyapunov analysis. Finally, to implement state estimation-based control for this system, the H-infinity Kalman filter is proposed as a state observer. The proposed control method achieves fast and accurate tracking of the reference setpoints of the VSI-fed PMSM under moderate variations of the control inputs.

The proposed H-infinity controller provides the solution to the optimal control problem for the VSI-PMSM system under model uncertainty and external perturbations. Actually, this controller represents a min–max differential game taking place between the control inputs, which try to minimize a cost function that contains a quadratic term of the state vector’s tracking error, the model uncertainty, and exogenous disturbance terms, which try to maximize this cost function. To select the feedback gains of the stabilizing feedback controller, an algebraic Riccati equation is repetitively solved at each time-step of the control algorithm. To analyze the stability properties of the control scheme, the Lyapunov method is used. It is proven that the VSI-PMSM loop has the H-infinity tracking performance property, which signifies robustness against model uncertainty and disturbances. Moreover, under moderate conditions, the global asymptotic stability properties of this control scheme are proven. The proposed control method achieves fast tracking of reference setpoints by the VSI-PMSM state variables, while keeping also moderate the variations of the control inputs. The latter property indicates that energy consumption by the VSI-PMSM control loop can be minimized.

The proposed nonlinear optimal control method for the VSI-PMSM system exhibits several advantages: Comparing to global linearization-based control methods, such as Lie algebra-based control or differential flatness theory-based control, the nonlinear optimal control scheme avoids complicated state variable transformations (diffeomorphisms). Besides, its control inputs are applied directly to the initial nonlinear model of the VSI-PMSM system, and thus inverse transformations and the related singularity problems are also avoided. Compared with backstepping control, the nonlinear optimal control scheme does not require the state-space description of the controlled system to be found in the triangular (backstepping integral) form. Compared with sliding-mode control, there is no need to define in an often intuitive manner the sliding surfaces of the controlled system. Finally, compared with local model-based control, the article’s nonlinear optimal control method avoids linearization around multiple operating points and does not need the solution of multiple Riccati equations or LMIs. As a result of this, the nonlinear optimal control method requires less computational effort.

Voltage source inverter-fed permanent magnet synchronous motors (VSI-PMSMs) are widely used in industrial actuation and mechatronic systems in water pumping stations, as well as in the traction of transportation systems (such as electric vehicles and electric trains or ships with electric propulsion), The solution of the associated nonlinear control problem enables reliable and precise functioning of VSI-fd PMSMs. This in turn has a positive impact in all related industrial applications and in tasks of electric traction and propulsion where VSI-fed PMSMs are used. It is particularly important for electric transportation systems and for the wide use of electric vehicles as expected by green policies which aim at deploying electromotion and at achieving the Net Zero objective.

Unlike past approaches, in the new nonlinear optimal control method, linearization is performed around a temporary operating point, which is defined by the present value of the system’s state vector and by the last sampled value of the control input vector and not at points that belong to the desirable trajectory (setpoints). Besides, the Riccati equation, which is used for computing the feedback gains of the controller, is new, as is the global stability proof for this control method. Comparing with nonlinear model predictive control, which is a popular approach for treating the optimal control problem in industry, the new nonlinear optimal (H-infinity) control scheme is of proven global stability, and the convergence of its iterative search for the optimum does not depend on initial conditions and trials with multiple sets of controller parameters. It is also noteworthy that the nonlinear optimal control method is applicable to a wider class of dynamical systems than approaches based on the solution of state-dependent Riccati equations (SDRE). The SDRE approaches can be applied only to dynamical systems that can be transformed to the linear parameter varying form. Besides, the nonlinear optimal control method performs better than nonlinear optimal control schemes which use approximation of the solution of the Hamilton–Jacobi–Bellman equation by Galerkin series expansions.

The purpose of this study is to present a new methodology of selective harmonics elimination (SHE) technique suitable for single-phase photovoltaic (PV) tied pulse width modulated (PWM) inverter.

In the proposed SHE, switching angles for inverter control are determined offline through numerical techniques and stored in a microcontroller memory as a function of modulation index (md). The methodology uses the solution that leads to a lower change of switching angles from the previous modulation index (md) for storing in the processor memory for multiple solutions. This leads to a smaller number of sections when a piecewise mixed model is considered for storing the entire switching angle curve for the online inverter control. The proposed idea is simulated and experimentally validated on a laboratory prototype of PV (500 W) grid-tied PWM inverter. The control environment is then realized in NI c-RIO 9082.

This proposed technique is suitable for limiting voltage total harmonics distortion (THD) in single-phase PV tied grid connected voltage source inverter (VSI). Moreover, it is found that filter (L-C) size requirement is less.

The proposed SHE with piecewise mixed model technique effectively reduces voltage THD with less filter size (L-C) in a single-phase PV-tied system.

The purpose of this paper is to find the optimum inverter type as the solder joint reliability point of view.

In this paper, finite element model(ing) simulations supported with power cycling aging experiments were used to demonstrate the best inverter type as the solder joint reliability point of view.

It was found that inverter types highly affect the solder joint health during its nominal operating.

The authors confirm the originality of this paper.