Search results

This paper aims to study the dimensional characteristics such as fabric density variations, dimensional constant parameters, linear and area dimensional changes and spirality angle variations of 1 × 1 rib knitted structures made from cotton‐spandex core spun yarns, under laundering regimes till 10th washing cycle.

Samples of the above fabrics underwent dry, wet and full relaxation treatments and were subjected to standard atmospheric conditions prior to take the measurements. Washing was done in a front loading machine under normal agitation with machine 56 RPM. Each washing regime includes wash, rinse, spin, tumble dry steps. Washing temperature was set at 40°C and water intake for washing was 30 l and rinsed with cold water. 0.1 g/l standard wetting agent was used. The mass of the load was maintained constant to 3 kg to keep the material ratio as 1:10. Washing regimes were continued till 10th cycle.

Cotton‐spandex rib structures came to a more stable state (minimum energy state) after 10th laundering cycle under the experimental conditions. Cotton did not come to such a state, even after 10th cycle proceeded. ANOVA analysis done under 95 percent confidential level has shown that fabric tightness and relaxation procedures give significant effect on dimensional characteristics of cotton‐spandex and cotton rib structures. However, area shrinkage variations of cotton rib fabrics have shown an exception to this.

According to the dimensional constant values, evenafter 10th washing cycle, cotton rib structures did not come to a stable position. This should be further investigated to achieve a better stable rib knitted structure.

The number of washing cycles can be increased or tumble dry duration can be increased to 120 min. to get a more stable state of cotton rib structures.

The results are important for the knitting industry to predict the dimensional behavior of designed knitted fabric under relaxation. These data can be used to set the circular machine parameters to achieve a more stable fabric after laundering.

The healthcare and hygiene textiles are gaining more importance for their eco-friendly and effective antimicrobial properties that have become essential to safeguard human beings from harmful microorganisms. The fabrics finished with chemical-based antimicrobial agents lead to environmental issues and are harmful to human beings. The paper aims to discuss these issues.

The present investigation is to develop a fabric with antioxidant and antimicrobial properties using the extracts of brown algae. Antimicrobial property has been imparted to the cotton fabric using microcapsules of brown seaweed extracts using the pad-dry-cure method. The presence of bioactive compounds and antioxidant activities of brown algae extracts was evaluated using gas chromatography-mass spectrometry and 2, 2-diphenyl-1-picrylhydrazyl radical scavenging technique, respectively. The total phenolic content of the seaweed extract was determined by the Folin-Ciocalteu method. The minimum bactericidal concentration and minimum inhibitory concentration methods were used to determine the antibacterial activity of the bacterial reduction percentage and parallel streak methods were used evaluate the antibacterial activity of seaweed-treated fabrics.

The methanol fraction of the treated fabric had the highest antioxidant activity (42.5+1.21 per cent), because the higher phenolic content traps the reactive oxygen species and develops the cells present in the skin. The results show that the lower inhibition (250 µg/mL) and bactericidal concentrations (1,000 µg/mL) possess higher antibacterial activity. The results also show that the treated fabric possess higher bacterial reduction of 96 per cent and higher zone of inhibition against Escherichia Coli and Staphylococcus Aureus which was about 35 mm and 40 mm. The air permeability, bending length and the wicking behaviour of the treated fabric were slightly reduced, but it has good bursting strength compared with the untreated fabric.

Such treated fabric is used for making wound dressing, surgical gowns, antibacterial socks and gauze bandage products in healthcare and hygiene textiles.

Fabric-object friction force is a fundamental factor in cloth simulation. A large number of parameters influence the frictional properties of fabrics such as fabric structure, yarn structure, and inherent properties of component fibers. The purpose of this paper is to propose a novel technique for modeling fabric-object friction force in knitted fabric simulation based on the mass spring model.

In this technique, unlike other studies, distribution of friction coefficient over the fabric surface is not uniform and depends on the fabric structure. The main reason for considering non-uniform distribution is that in various segments of fabric, contact percent of fabric-object is different.

The proposed technique and common methods based on friction coefficient uniform distribution are used to simulate the frictional behavior of knitted fabrics. The results show that simulation error values for proposed technique and common methods are 2.7 and 9.4 percent as compared with the experimental result, respectively.

In the existing methods of the friction force modeling, the friction coefficient of fabric is assumed uniform. But this assumption is not correct because fabric does not have an isotropic structure. Thus in this study, the friction coefficient distribution is considered based on fabric structure to achieve more of realistic simulations.

The purpose of this paper is to optimize the linear densities of polyester yarn and filament for inner layer and elastane for middle layer with cotton yarn outer layer in plain knitted plated structure for hot and dry environment clothing.

Three levels of polyester yarn linear densities (11.1, 8.4 and 5.6 Tex), filament linear densities (0.8, 1.55 and 2.3 Decitex) and elastane (0, 4 and 8 percent) with 14.75 Tex cotton yarn have been used to knit 15 single jersey plated fabrics based on Box and Benhens experimental design with same loop length. Three cotton–elastane core-spun fabrics were also produced. All the fabrics were analyzed for moisture and ergonomic comfort properties and wet fabric coefficient of friction.

The increase in elastane content and yarn linear density decreases water vapor and air permeability; the increase in filament linear density decreases wicking rate and water absorbency. The optimum solution is 5.55 Tex polyester yarn of 0.8 Decitex filament as inner layer and 14.75 Tex cotton yarn as outer layer which gives good heat and moisture transfer without stickiness.

The implication of this paper is to study thinner polyester, polypropylene and polyethylene fabrics with more micro pores as skin contact layer for quicker heat and moisture transfer.

Outward wickability of sweat from the skin is the prime requirement of all skin contact layer fabrics.

It shifts the social attitude of most comfortable fabric to polyester–cotton plated for hot and dry climate.

This paper employs a more practical method for the selection of fabric.

As one kind of filament/staple fiber composite yarn, core spun yarn has been widely used, especially on Jeans. However, there is only one filament in the commonly used core spun yarn, such as spandex, and the performance of the one filament often is influenced during dyeing and finishing. Therefore, in the paper, twin-core spun yarns with two different filaments feeding simultaneously were spun on ring spinning frame modified by one kind of filament feeding numerical control device. The paper aims to discuss these issues.

Four kinds of twin-core spun yarns, cotton/spandex/PBT, cotton/spandex/CM800, cotton/spandex/T400, cotton/spandex/SPH with linear density 36.4tex/40D/50D were spun. For improving the covering effect of the two filaments, the filament feeding position, filament pre-drafting multiple, distance between two staple roving, designed twist factor of the core spun yarn were optimized.

It is shown that comparing with the core spun yarn, the breaking strength and elongation of the twin-core spun yarns are improved since the addition of another elastic filament, while the evenness is a little worse.

By using the twin-core spun yarns, corresponding knitted and woven fabrics are produced. Meanwhile, for simulating the dyeing and finishing process, the knitted fabrics were treated during the 150°C high temperature. It is shown that comparing with the fabrics produced by cotton/spandex yarn, addition of another elastic filament can improve the fabric strength and resistant and has positive effect on worsen prevention for high temperature treated fabric elastic recovery, and on change prevention during the dyeing and finishing process for fabric handle properties, and improves the fabric stability.

Soil and stain removal has always been a contributing factor in the acceptance of a neat and clean appearance for most types of wearing apparel. Investigates the strength and whiteness retention and degree of stain removal of representative nurse‐uniform fabrics, after removal of selected medicinal and other dye‐based stains. Although many fabric properties affect the ease of soil removal or the retention of fabric strength, the objective was to compare the serviceability of twill versus rib weave fabrics and soil‐release versus non‐soil‐release finished fabrics. Of the stains tested, the most problematic stain was that created by permanent marker. Although removed in the early stages of testing, it became increasingly difficult to maintain fabric whiteness.

Testing the effect of machine washing and drying on dimensional stability produces information about the fabric types that satisfy consumers during end use. At present, it is a known fact that the weave patterns affect the dimensional stability property of woven fabrics. But the essential requirement is to determine the magnitude of this effect for weave types and establish the proper weave types for end use in definite tolerances. The purpose of this paper is to investigate the dimensional stability properties of 100 percent cotton woven fabrics as a function of weave type.

In total, 12 woven fabrics with different weave derivatives are woven with 100 percent cotton and Ne 30/1 combed ring spun yarn for this investigation. These samples are then washed and dried according to domestic washing and drying standard test procedures. The shrinkage values are measured and then expressed as a percentage of the initial dimensions.

It was observed that weave pattern has a significant effect on the dimensional behavior of woven fabrics. Weave patterns with a high number of interlacings have lower shrinkage values. At the same time, lower yarn crimp values restricted the fabric shrinkage and resulted in better dimensional stability. According to one way ANOVA results, the effect of weave type on dimensional stability is found to be significant (p<0.01). In addition to these, Pearson correlation analysis showed that there is an important, positive and fair relationship between the number of washing cycles and total shrinkage.

The study covers 100 percent cotton woven fabrics with one type of warp and weft sett. The only finishing treatment applied to the sample fabrics was desizing. No dyeing was carried out.

Understanding the magnitude of the effect of weave type on dimensional stability of cotton woven fabrics produces more knowledge about products which satisfy the customers with respect to dimensional stability during usage.

Enzyme treatment technologies are frequently applied in textile processing for the modification of fabric handle appearance and other surface characteristics in regard to cotton and cotton blended fabrics. The purpose of this paper is to understand the impact of enzyme treatments on fabric preparation, dyeing, and finishing processes of woven fabrics. In particular, certain mechanical and surface properties of 100 percent cotton interlock knitted fabrics after treatment with a cellulase enzyme.

Interlock knitted fabrics were used for this research. These cotton fabrics were treated with experimental Trichoderma reesei cellulases containing different cellulase profiles and treatment was carried out under laboratory conditions. The effects of cellulase treatment on weft knitted fabric regarding mechanical and surface properties were evaluated using the KES‐FB Kawabata evaluation system. The influence of enzyme treatments, friction, and geometrical roughness on the face and reverse side of interlock knitted fabrics were discussed in comparison with untreated interlock knitted fabric.

After each of the enzyme treatments, the interlock knitted fabrics lost part of their weight and, therefore, they became thinner. Furthermore, the extension properties become higher in both directions with regard to the untreated knitted fabric for all used enzymes and carried out treatments.

The paper usefully analyzes changes in the extension and surface properties of enzyme‐treated interlock knitted fabrics by investigating the influence of whole or enriched endoglucanases celullases of Trihoderma reesei under different treatment conditions.

Fabric structural parameters play an important role on the thermal comfort of clothing. The purpose of this paper is to investigate the effect of weave pattern and also the length of warp float in each weave pattern on the thermal properties of woven fabrics.

Cotton woven fabrics with 23 different weave patterns were produced with identical linear densities of warp and weft yarns as well as constant warp and weft nominal densities. Thereafter, their thermal properties were studied.

Statistical analysis demonstrated that the weave pattern significantly influences on the thermal properties of woven fabrics. Plain fabric exhibited the lowest thermal resistance and the highest thermal conductivity, and hopsack 2/2(4) weave fabric demonstrated the highest thermal resistance and the lowest thermal conductivity. Moreover, except hopsack (4) weave fabric, in all weave patterns, the length of warp float had a significant effect on the thermal characteristics of the fabrics, as increasing the warp float led to increase in the thermal resistance of the fabrics.

Weave pattern as one of the structural parameters of the fabric has a determinant role on the thermal properties of fabric and subsequently, the comfort of clothing produced from it. Owing to the lack of investigation in this area, this research considers the effect of weave pattern and the length of warp float in each weave pattern on the thermal properties of woven fabrics.