Search results

The purpose of this paper is to compile a comprehensive status report on pipes/piping networks across different industrial sectors, along with specifications of materials and sizes, and showcase welding avenues. It further extends to highlight the promising friction stir welding as a single solid-state pipe welding procedure. This paper will enable all piping, welding and friction stir welding stakeholders to identify scope for their engagement in a single window.

The paper is a review paper, and it is mainly structured around sections on materials, sizes and standards for pipes in different sectors and the current welding practice for joining pipe and pipe connections; on the process and principle of friction stir welding (FSW) for pipes; identification of main welding process parameters for the FSW of pipes; effects of process parameters; and a well-carved-out concluding summary.

A well-carved-out concluding summary of extracts from thoroughly studied research is presented in a structured way in which the avenues for the engagement of FSW are identified.

The implications of the research are far-reaching. The FSW is currently expanding very fast in the welding of flat surfaces and has evolved into a vast number of variants because of its advantages and versatility. The application of FSW is coming up late but catching up fast, and as a late starter, the outcomes of such a review paper may support stake holders to expand the application of this process from pipe welding to pipe manufacturing, cladding and other high-end applications. Because the process is inherently inclined towards automation, its throughput rate is high and it does not need any consumables, the ultimate benefit can be passed on to the industry in terms of financial gains.

To the best of the authors’ knowledge, this is the only review exclusively for the friction stir welding of pipes with a well-organized piping specification detailed about industrial sectors. The current pipe welding practice in each sector has been presented, and the avenues for engaging FSW have been highlighted. The FSW pipe process parameters are characteristically distinguished from the conventional FSW, and the effects of the process parameters have been presented. The summary is concise yet comprehensive and organized in a structured manner.

This paper aims to overcome the inability of both comparing loss costs and accounting for production resource losses of Overall Equipment Effectiveness (OEE)-related approaches.

The authors conducted a literature review about the studies focusing on approaches combining OEE with monetary units and/or resource issues. The authors developed an approach based on Overall Equipment Cost Loss (OECL), introducing a component for the production resource consumption of a machine. A real case study about a smart multicenter three-spindle machine is used to test the applicability of the approach.

The paper proposes Resource Overall Equipment Cost Loss (ROECL), i.e. a new KPI expressed in monetary units that represents the total cost of losses (including production resource ones) caused by inefficiencies and deviations of the machine or equipment from its optimal operating status occurring over a specific time period. ROECL enables to quantify the variation of the product cost occurring when a machine or equipment changes its health status and to determine the actual product cost for a given production order. In the analysed case study, the most critical production orders showed an actual production cost about 60% higher than the minimal cost possible under the most efficient operating conditions.

The proposed approach may support both production and cost accounting managers during the identification of areas requiring attention and representing opportunities for improvement in terms of availability, performance, quality, and resource losses.

Estimation of (in)efficiency became a popular practice that witnessed applications in virtually any sector of the economy over the last few decades. Many different models were deployed for such endeavors, with Stochastic Frontier Analysis (SFA) models dominating the econometric literature. Among the most popular variants of SFA are Aigner, Lovell, and Schmidt (1977), which launched the literature, and Kumbhakar, Ghosh, and McGuckin (1991), which pioneered the branch taking account of the (in)efficiency term via the so-called environmental variables or determinants of inefficiency. Focusing on these two prominent approaches in SFA, the goal of this chapter is to try to understand the production inefficiency of public hospitals in Queensland. While doing so, a recognized yet often overlooked phenomenon emerges where possible dramatic differences (and consequently very different policy implications) can be derived from different models, even within one paradigm of SFA models. This emphasizes the importance of exploring many alternative models, and scrutinizing their assumptions, before drawing policy implications, especially when such implications may substantially affect people’s lives, as is the case in the hospital sector.

The construction industry shows an increased interest in how to manage logistics within construction projects. Often construction logistics is outsourced to a logistics service provider (LSP). However, construction logistics is normally approached either as a strategic decision or as an operational issue and rarely as a tactical concern. The purpose of this study is to explore how to organize the logistics outsourcing decision at strategic, tactical and operational levels.

This study is performed as a single-case study within a construction corporation, containing (amongst others) a building contractor (BC) and a construction equipment rental company (CERC) offering logistics services.

The study shows that to procure construction logistics service successfully, BCs need logistics capabilities at strategic and tactical levels to maintain an alignment between the use of logistics services and operational characteristics. Simultaneously, CERC’s need to design their service offerings to correspond to the needs of the BC.

This study builds on a single-case study of a Swedish construction corporation. Further research is needed to better understand current logistics outsourcing and development practices and how these can be improved to foster better logistics management at the project level.

BCs find suggestions of different logistics organization structures and suitable outsourcing arrangements. CERCs and LSPs can use the findings to understand their customers’ needs and adapt service offerings.

To the best of the authors’ knowledge, this study is one of the first studies of how two companies within a corporation can work together to develop construction logistics service offerings.

A positive outlook on the impact of Industry 4.0 (I4.0) on sustainability prevails in the literature. However, some studies have highlighted potential areas of concern that have not yet been systematically addressed. The goal of this study is to challenge the assumption of a sustainable Fourth Industrial Revolution by (1) identifying the possible unintended negative impacts of I4.0 technologies on sustainability; (2) highlighting the underlying motivations and potential actions to mitigate such impacts; and (3) developing and evaluating alternative assumptions on the impacts of I4.0 technologies on sustainability.

Building on a problematization approach, a systematic literature review was conducted to develop potential alternative assumptions about the negative impacts of I4.0 on sustainability. Then, a Delphi study was carried out with 43 experts from academia and practice to evaluate the alternative assumptions. Two rounds of data collection were performed until reaching the convergence or stability of the responses.

The results highlight various unintended negative effects on environmental and social aspects that challenge the literature. The reasons behind the high/low probability of occurrence, the severity of each impact in the next five years and corrective actions are also identified. Unintended negative environmental effects are less controversial than social effects and are therefore more likely to generate widely accepted theoretical propositions. Finally, the alternative hypothesis ground is partially accepted by the panel, indicating that the problematization process has effectively opened up new perspectives for analysis.

This study is one of the few to systematically problematize the assumptions of the I4.0 and sustainability literature, generating research propositions that reveal several avenues for future research.

The primary objective of this article is to examine current procurement, inventory control and management practices in modern healthcare, with a particular focus on the procurement and management of surgical supplies in a prominent public, highly specialized healthcare sector.

This study was conducted in three phases. In Phase 1, the study team interacted with various hospital management stakeholders, including the surgical hospital store, examined the current procurement process and identified challenges. Phase 2 focused on selecting items for a detailed study and collected the qualitative and quantitative details of the store department of the healthcare sector chosen. A detailed study analyzed revenue, output/demand, inventory levels, etc. In Phase 3, a decision-making framework is proposed, and inventory control systems are redesigned and demonstrated for the selected items.

It was observed that the demand for many surgical items had increased significantly over the years due to an increase in disposable/disposable items, while inventories fluctuated widely. Maximum inventory levels varied between 50 and 75%. Storage and availability were important issues for the hospital. It is assumed the hospital adopts the proposed inventory control system. In this case, the benefits can be a saving of 62% of the maximum inventory, 20% of the average stock in the system and optimal use of storage space, improving the performance and productivity of the hospital.

This study can help the healthcare sector administration to develop better systems for the procurement and delivery of common surgical items and efficient resource allocation. It can help provide adequate training to store staff. This study can help improve management/procurement policies, ordering and delivery systems, better service levels, and inventory control of items in the hospital business context. This study can serve as a pilot study to further investigate the overall hospital operations.

This study can help the healthcare sector administration develop better systems for procuring and delivering common surgical items and efficient resource allocation. It can help provide adequate training to store staff. This study can help improve management/procurement policies, ordering and delivery systems, better service levels and inventory control of items in the hospital business context. This study can serve as a pilot study to further investigate the overall hospital operations.

This study is an early attempt to develop a decision framework and inventory control system from the perspective of healthcare inventory management. The gaps identified in real hospital scenarios are investigated, and theoretically based-inventory management strategies are applied and proposed.

The circular economy (CE) promotes the recovery of value from waste while also working towards achieving long-term environmentally sustainable goals. The goal of this research is to explore the challenges, opportunities, future scope and green practices that small and medium-sized firms (SMEs) face as they move from the linear economy to the CE.

Based on a structured questionnaire, a survey was conducted with representatives from 163 SMEs in India. The data were analysed using co-variance based structural equation modelling technique.

This research identifies various challenges, including consumer acceptability, worries about awareness, recyclability issues, financial constraints and the absence of a defined management plan for SMEs in adopting the CE. Further, strong management will, innovation, technical up-gradation, training of employees, employee motivation and appropriate guidelines are recognized as essential possibilities for CE implementation.

While there has been some work on CE, no studies have directly compared these efforts with the goal of shifting from a linear economy to a CE. Given the transient nature of many archives, it is critical that the efforts put into them and the opinions of those who work in them be recorded so that communities can benefit from a shared linear economy in making decisions about their own history.

The purpose of this short communication is to shed light on the accuracy of quantification methods of household food waste (HFW).

Thirty-seven recently published studies in HFW were surveyed for this commentary. Exemplary methods and findings of these studies were compared.

It is challenging to draw conclusions on the amount of the HFW per person/town/country due to the inconsistent and heterogeneous methodologies used. We recommend using direct measurements or triangulation of methods to help ensure valid findings. Governments should incentivize consumers to deliver their food waste to designated locations where weights could accurately be assessed. Monetary or tax incentives could help stimulate an accurate accounting of waste and encourage reductions. Food waste measurements should be consistently reported as kg/person/week.

Food and water security must be provided for all. It is estimated that one-third of edible food for humans is currently lost or wasted globally. According to the World Food Program (WFP), this is about 1.3 billion tons of food per year and at the same time this wasted food could be sufficient to feed two billion people.

The aim of this paper is to fill a gap in the literature about the magnitude and significance of HFW and its impact on the environment and social welfare. Currently, there are no generally accepted uniform methods of food waste quantification at the household level. This original communication brings the importance and challenges of the quantification of HFW to light.

Considering food waste as a global problem resulting from the wastage of valuable resources that could fulfil the requirements of malnourished people, the current research focusses on understanding consumerism’s impact on this phenomenon. Additionally, the circular economy (CE) approach can be critical in reducing food waste and promoting sustainability.

A systematic literature review was conducted using bibliometrics and network analysis. The study reviewed 326 articles within 10 years, from 2013 to 2023.

The findings reveal four prominent factors – behavioural, environmental, socioeconomic and technological – in managing food waste (FW). Reducing FW at a holistic level can benefit individuals and the environment in several ways.

Consumers are encouraged to be more responsible for their food consumption by reducing food waste, as it affects societies and businesses both economically and environmentally. This can help promote a responsible consumption culture that values quality over quantity and encourages people to make more informed choices about what they eat and how they dispose of it post-consumption. All stakeholders, including firms, the government and consumers, must examine the motives behind inculcating pro-environmental behaviour.

Addressing consumerism and the ability to decrease FW behaviour are complex issues that require a multidimensional approach. This study seeks to fill the gap in understanding consumerism and the capacity to reduce FW using the CE approach and understand the research gaps and future research trends.