Search results

The purpose of this paper is to evaluate and discuss colour properties, stability and lightfastness after accelerated exposure in xenon‐arc light apparatus, of 3D ink jet prints produced by using 3D colour printing process.

3D colour prints were produced using ZCorporation 3D printing method. The samples were divided into groups according to the finishing process applied (untreated, finished with different infiltrants). Colorimetric properties were measured using spectrophotometer. Samples were placed into xenon‐arc based weathering apparatus (Xenotest), using the preset glass filtered sunlight, standard indoor conditions. Colour stability was evaluated as change in colour after repeating the spectrophotometer measurements and comparing spectral and specific colorimetric values of initial and exposed samples.

Based on methodology used, the analysis has shown the changes in colour appearance of differently finished 3D prints, which were mostly attributed to chroma and lightness variations. The colour stability of samples studied noticeably varied and is dependent on colour, percentage of ink coverage and finishing method. Issues of colour and stability of 3D ink jet prints could become important as 3D printing emerges into new application areas, in which the object properties will need to be maintained for a certain amount of time.

The research is comparative and is limited to the specific materials and procedures used.

The paper describes aspects of colour 3D printing for which the published research and literature data are still, for the most part, lacking. Colour measurements methodology and evaluation of stability described could be of value for further research and for users of the technology.

Examines the tenth published year of the ITCRR. Runs the whole gamut of textile innovation, research and testing, some of which investigates hitherto untouched aspects. Subjects discussed include cotton fabric processing, asbestos substitutes, textile adjuncts to cardiovascular surgery, wet textile processes, hand evaluation, nanotechnology, thermoplastic composites, robotic ironing, protective clothing (agricultural and industrial), ecological aspects of fibre properties – to name but a few! There would appear to be no limit to the future potential for textile applications.

Information technology (IT) is a powerful communication and computing tool in today’s business environment. The role of IT in shaping business operations is a crucial one. IT can redesign and transform a low technology industry into a high technology industry. The printing and publishing industry is one such case. Two local printing companies in Singapore, namely Superskill Graphics and Xpress Print, had won the national IT awards in 1990 and 1994 respectively for their innovative use of IT. Aims to examine how both companies deploy IT to transform their printing processes from a low technology, labour‐intensive environment with local clientele in the 1970s to a high technology environment with global clientele in the 1990s.

The purpose of this paper is provide a broad view for the standardization efforts of color quality evaluation of color 3D printing techniques. Further, this review paper demonstrates the processes and color properties of most color 3D printing techniques with specific devices and applications to extend the range of possible memberships of standardization group.

Six color 3D printing techniques including plastic-based, paper-based, powder-based, organism-based, food-based and metal-based color 3D printing have been introduced and illustrated with colorization principles and forming features in detail. Moreover, for printed 3D color objects, literature about color measurement, color specification and color reproduction are described and analyzed, respectively.

Four color 3D printing techniques including plastic-based, paper-based, powder-based and food-based color 3D printing show great affinity toward standardization of color quality evaluation, while their colorization principles indicate that it is difficult with a single standard frame. It is possible to develop a completed color quality evaluation standard for color 3D printing based on approaches in color 2D printing when color measurement method and devices are standardized together.

The paper provides an important guide focusing on the efforts to standardize the colorization processes and color quality evaluation of the color 3D printing techniques.

This chapter offers an overview of the applications of artificial intelligence (AI) in the textile industry and in particular, the textile colouration and finishing industry. The advent of new technologies such as AI and the Internet of Things (IoT) has changed many businesses and one area AI is seeing growth in is the textile industry. It is estimated that the AI software market shall reach a new high of over US$60 billion by 2022, and the largest increase is projected to be in the area of machine learning (ML). This is the area of AI where machines process and analyse vast amount of data they collect to perform tasks and processes. In the textile manufacturing industry, AI is applied to various areas such as colour matching, colour recipe formulation, pattern recognition, garment manufacture, process optimisation, quality control and supply chain management for enhanced productivity, product quality and competitiveness, reduced environmental impact and overall improved customer experience. The importance and success of AI is set to grow as ML algorithms become more sophisticated and smarter, and computing power increases.

Examines the thirteenth published year of the ITCRR. Runs the whole gamut of textile innovation, research and testing, some of which investigates hitherto untouched aspects. Subjects discussed include cotton fabric processing, asbestos substitutes, textile adjuncts to cardiovascular surgery, wet textile processes, hand evaluation, nanotechnology, thermoplastic composites, robotic ironing, protective clothing (agricultural and industrial), ecological aspects of fibre properties – to name but a few! There would appear to be no limit to the future potential for textile applications.

Examines the ninth published year of the ITCRR. Runs the whole gamut of textile innovation, research and testing, some of which investigates hitherto untouched aspects. Subjects discussed include cotton fabric processing, asbestos substitutes, textile adjuncts to cardiovascular surgery, wet textile processes, hand evaluation, nanotechnology, thermoplastic composites, robotic ironing, protective clothing (agricultural and industrial), ecological aspects of fibre properties – to name but a few! There would appear to be no limit to the future potential for textile applications.

In the field of research on the application of digital printing to textile materials, there are still many research issues that arise from the very demanding interaction of digital printing technology and the complex, heterogeneous surface system of textile materials. This is precisely why the area of pre-treatment of textile materials is in need of research, and the purpose of this research was to establish the level of influence of physical and chemical activation of the textile surface with plasma and the possibility of improving the quality of the print and colour reproduction.

The paper deals with the possibility of applying argon and oxygen cold low-pressure plasma in the processing of cellulose knitted fabrics, with the aim of improving the quality of the print and colour reproduction in digital pigment inkjet printing. The selected raw material samples were 100% raw cotton and lyocell. After plasma treatment, the samples were printed by digital ink jet printing with water-based pigment printing ink. An analysis of the micromorphological structure of untreated and plasma-treated samples before and after printing was carried out, and a comparative analysis of the colour of the printed elements was carried out depending on the pre-treatment.

The conducted research showed a positive influence of plasma pre-treatment on the coverage of the fibre surface with pigments, the uniformity of pigment distribution along the fibre surface and the uniformity of the distribution of the polymeric binder layer. This has a positive effect on colour reproduction. Also, certain improvements in colourfastness to washing were obtained.

Considering the complexity of the topic, although exhaustive, this research is not sufficient in itself, but opens up new questions and gives ideas for further research that must be carried out in this area.

Also, this kind of research contributes to the possibility of adopting the idea of industrial plasma transformation, as an ecologically sustainable functionalisation of textiles, which has not yet been established.

This research is certainly a contribution to the establishment of acceptable textile pre-treatment methods in the field of digital printing, as one of the key quality factors in digital textile printing (DTP). Considering the still large number of obstacles and unanswered questions encountered in the field of digital printing on textiles, this kind of research is a strong contribution to the understanding of the fundamental mechanisms of the complex interaction between printing ink and textile.