Search results

Micro-EDM is an important process in the field of micro-machining. Especially, the μEDM is one of the technologies widely used for manufacture of micro-parts, micro-tools and micro-components, etc. The accuracy and repeatability of the μEDM process is still highly dependent on the μWEDG process. The electrode generation and regeneration is considered a key enabling technology for improving the performance of the μEDM process. Many engineers considered the Taguchi technique as engineering judgment during multiple response optimizations. This paper aims to focus on the use of micro-WEDG process to generate a micro-tool (electrode) with minimum surface roughness and higher metal removal rate (MRR).

In this research work, the Taguchi quality loss function analysis is used to examine and explain the influences of three process parameters (feed rate, capacitance and voltage) on the output responses such as MRR and surface roughness. Further, the optimized machining parameters were determined considering the multiple response objective using Taguchi multi-response signal-to-noise ratio.

Based on the experimental result, it was concluded that the Taguchi technique is suitable for the optimization of multi-response problem.

This paper presents an alternative approach using Taguchi's quality loss function. In most of the modern technological situations, more than one response variable is pertinent to the success of an industrial process. In this research work, the influence of feed rate, capacitance and voltage on the MRR and surface roughness (multiple responses) is investigated.

The Taguchi method is the conventional approach used in off‐line quality control. However, most previous Taguchi method applications have dealt only with a single‐response problem. The multi‐response problem has received only limited attention. Proposes an effective procedure on the basis of the quality loss of each response so as to achieve the optimization on multi‐response problems in the Taguchi method. The procedure is a universal approach which can simultaneously deal with continuous and discrete data. Evaluates a plasma‐enhanced chemical vapour deposition (PECVD) process experiment and a case study, indicating that the proposed procedure yields a satisfactory result.

This paper aims to examine the recipe for and standard methods of dyeing cotton fabric with natural dyes from jackfruit wood extract. The dyeing of the fabric was performed by immersion it without heating for a short time to obtain the best results.

The dyeing experiment using cotton fabric with jackfruit wood extract was conducted by immersion at room temperature. The independent variables studied were the mordant method, type of mordant, mordant concentration, salt concentration and dyeing pH. The dependent variables were colour strength and colour fastness to washing and rubbing. The orthogonal array L16 (45) was used in the study to obtain the optimal values for each parameter of the response variables. The multi-response signal-to-noise (MRSN) method was used to optimise the five response variables with different quality characteristics so that the best parameters could be obtained based on the highest MRSN ratio value.

The best parameters were obtained at an MRSN value of 4.5254 under A3B3C1D2E4 conditions, namely, the dyeing process with post mordant, aluminium nitrate type mordant, mordant concentration of 10 g/L, salt concentration of 15 g/L and dyeing a pH: of 10. Under these conditions, the value of K/S was obtained at 1.893, colour fastness to washing (GS: 4) and (SS: 4–5), dry rubbing (SS: 5) and wet rubbing (SS: 4–5).

Obtaining a standard recipe and method for dyeing cotton cloth with jackfruit wood extract by immersion without heating is expected to lead to the development of natural dyes, and especially their application on an industrial scale. This standard and method can be used as technical guidelines by industry. The use of aluminum nitrate as a mordant will help achieve optimal dyeing results. The use of polyaluminium chloride (PAC) mordant, which has the potential to produce high colour strength, and papaya fruit sap, which has the capacity to increase colour fastness, still need to be developed to improve the results of natural dyes.

The standard recipe and dyeing method will be able to improve the results of the dyeing of cotton fabrics with natural dyes. Short immersion dyeing without heating and the optimal results obtained are the main attractions for their use by the textile/batik industry, as the process is easier and a lower cost. The results of dyeing with dark colours and good colour fastness mean the textile products are of the higher quality demanded by consumers, thereby increasing sales. This will encourage the use of and increase the need for natural dyes by industry, consequently reducing the use of synthetic dyes.

The use of natural dyes, chemical mordant from aluminum salts, and natural mordant from papaya fruit sap in the dyeing process in the textile/batik industry in Indonesia will produce eco-textile and eco-batik products that are environmentally friendly and of high quality. This in turn will increase consumer interest and sales, meaning that the income and economy of workers in the textile industry/crafts sector will also increase. In addition, the use of natural dyes with the selection of a safe mordant (not containing heavy metals) will reduce the use of synthetic dyes, which pollute and damage the aquatic environment.

This study found a standard recipe and method of dyeing cotton fabric with natural dyes from jackfruit wood extracted by immersion without heating for a short time to obtain the best results. In addition, the discovery was of PAC, a new mordant which is effective in the use of natural dyes can give high colour strength to cotton fabric. In addition to the discovery of a new mordant, PAC, which has the potential to produce high colour strength, papaya fruit sap also has the capacity to increase colour fastness with the use of natural dyes from the flavonoid group.

The purpose of the study reported in the paper is to apply a structured problem-solving approach based on the Lean approach to analyse weld defects and derive appropriate solutions.

Manufacturing organisations involved in welding fabrication are expected to reduce weld defects to attain competitive advantage. Weld defects need to be systematically analysed for valve performance enhancement. In this research study, Lean approach is used to reduce variations and waste by annihilating the root causes for failures that occur during submerged arc welding (SAW) process.

The deployment of solutions facilitated weld defect reduction and substantial financial savings for the organisation.

The framework has been test-implemented for analysing variations and wastes generated in the SAW process. In future, studies could be conducted for assessing different welding processes.

The proposed Lean framework has been successfully implemented in a large-scale manufacturing unit involved in fabrication work.

Lean framework has been test-implemented in a large-scale manufacturing organisation involved in weld fabrication work.